• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.2
• /
• pp.7-15
• /
• 2017

Recently, an electricity sensor system has been installed and operated to prevent failures and accidents by identifying whether a transformer is normal in advance of failure. This electricity sensor system is able to both measure and monitor the transformer's power and voltage remotely and send information to a manager when unusual operation is discovered. However, a battery is required to operate power detection devices, and battery systems need ongoing management such as regular replacement. In addition, at a maintenance cost, occasional human resources and worker safety problems arise. Accordingly, we apply a linear electromagnetic generator using vibration energy from a transformer for an electric sensor system's drive in this research and we conduct optimal design to maximize the linear electromagnetic generator's power. We consider design variables using the provided design method from Process Integration, Automation, and Optimization (PIAnO), which is common tool from process integration and design optimization (PIDO). In addition, we analyze the experiment point from the design of the experiments using "MAXWELL," which is a common electromagnet analysis program. We then create an approximate model and conduct accuracy verification. Finally, we determine the optimal model that generates the maximum power using the proven approximate kriging model and evolutionary optimization algorithm, which we then confirm via simulation.

• Corrosion Science and Technology
• /
• v.14 no.1
• /
• pp.12-18
• /
• 2015

Since the operation period of nuclear power plants has increased, the degradation of buried pipes gradually increases and recently it seems to be one of the emerging issues. Maintenance on buried pipes needs high quality of management system because outer surface of buried pipe contacts the various soils but inner surface reacts with various electrolytes of fluid. In the USA, USNRC and EPRI have tried to manage the degradation of buried pipes. However, there is little knowledge about the inspection procedure, test and manage program in the domestic nuclear power plants. This paper focuses on the development and build-up of real-time monitoring and control system of buried pipes. Pipes to be tested are tape-coated carbon steel pipe for primary component cooling water system, asphalt-coated cast iron pipe for fire protection system, and pre-stressed concrete cylinder pipe for sea water cooling system. A control system for cathodic protection was installed on each test pipe which has been monitored and controlled. For the calculation of protection range and optimization, computer simulation was performed using COMSOL Multiphysics (Altsoft co.).

• Journal of Families and Better Life
• /
• v.7 no.2
• /
• pp.95-107
• /
• 1989

In this study one aspect of consumer behavior in household equipment utilization was investigated the pattern, frequency, rate of washer use and their relation to the following factors a) Washer related factors : extent of the presence of desired characteristics, the evaluation of washer's intrinsic features and related household facilities. b) Psycho-social factors : attitude of energy conservation, preference & ability to wash by hand, standard of washing of the respondent homemaker. c) Socio-demographic factors : age, education level and employment status of homemaker, house-hold income, the presence of children under seven years, size of family, the presence of a paid help. The subjects of this study were 286 homemakers with washer in Seoul. Analysis methods were used to fuequency, one-way ANOVA, Gamma test, Pearson's Correlation Coefficient, t-test and multiple regression of SPSS program. The major findings are the following; 1) The pattern, frequency, rate of washe use appeared various in every household. 2) Extent of the presence of desired characteristics was very low and respondents evaluated their washer's intrinsic features moderate. 3) The pattern of washer use was affected by the evaluation of washer's intrinsic features, preference & ability to wash by hand, wife's employment and household income. The frequency of washer use was affected by family size and preference & ability to wash by hand. The rate of washer use was affected by extent of the presence of desired characteristics, the evaluation of washer's intrinsic features and preference & ability to wash by hand. Therefore, washing by hand is major substitute for washer. If more desired characteristics are added to washer, intrinsic features are improved, and maintenance costs are reduced or household income is raised, every houshold with washer will use washer more than washing by hand in washing ask so that it may gain more utility from washer.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.95-102
• /
• 2014

In this paper, we propose the high speed PLC-based automatic control system for a smart LED streetlight. The proposed the automatic control system were constructed of a power line modem part and monitoring part, streetlight controller part for the high speed communication frequency band and streetlight ballasts characterization and real-time remote control using a high-speed PLC network, and it was designed to meet to lighting grades conditions of KS road lighting standards. The proposed automatic control system were easy monitoring of the power consumption using PC through to the comparison result of the existing streetlight system. As a result, it was confirmed to the possibility of efficient operation for the real-time monitoring and maintenance by induction of reasonable power consumption through to the LED streetlight state checking and remote-control. In addition, we proved to improvement of expected effects for the power cost savings, the energy efficiency, and streetlight differentiation and advanced.

• Korean Journal of Occupational Health Nursing
• /
• v.10 no.2
• /
• pp.153-163
• /
• 2001

Purpose of the study was to identify the relationship between job stress and health promoting behavior(HPB) among nurses. Samples were 426 nurses working in some university hospitals which were chosen by convenient sampling. Data was collected by using constructed questionnaires from March 28th to April 7th 2001. The instruments used for in the study were 'The Health Promotion Behavior' which was developed by Park(1995) and 'The Job Stress' modified by Kim(1998). The data was analyzed by mean, standard deviation, t-test, ANOVA, Duncan test and Pearson's correlation coefficient in the SPSS program. The results were as follows : 1. The mean score of job stress was 3.51 which is meant to be 'more than moderate' level of stress. 2. The total mean score of health promoting behavior was 2.44; 'Management of Sanitary life' 3.12, 'Harmonious relation-ships' 2.95, 'Emotional support' 2.71, 'Diet control' 2.59, 'Self-achievement' 2.57, 'Self-control' 2.31, 'Healthy diet' 2.29, 'Rest and sleep' 2.26, 'Exercise and activity' 2.12, 'Regular diet' 1.91 and 'Professional health maintenance' 1.61 were shown in each HPB category. 3. There were not any statistical differences between job stress and general characteristics of nurses. 4. The health promoting behavior was significantly influenced by factors of age, marital status, education level, religion, position, career and family income of nurses. 5. There was not any correlations between job stress and health promoting behavior.

• Journal of Wetlands Research
• /
• v.14 no.4
• /
• pp.547-559
• /
• 2012

Abandoned channel is vestiges of running in the past. Abandoned channels have been formed mostly by artificial river maintenance through channel straightening in Korea. Managed properly, these now abandoned channels can provide habitat for wildlife, maintain biodiversity of aquatic life, security against flooding and recreation area for human. However, because the areas are officially classified as abandoned, the channels is collapsing and decaying from years of neglect. This study suggested functional assessment for wetland-type abandoned channel in order to provide appropriate management and investment. For this reason, The study will examine and evaluate these channels with regard to the following four major criteria (Natureless, Habitat, Water-friendliness and Water quality) and 21 indices. Consequently, abandoned channel in two Nakdong river sites, site 1 was needed for protection or improvement in the medium to longer term, while site 2 was in good condition. This evaluation method will be helpful to manage wetland-type abandoned channel in Korea and will be able to use National River Health Program.

• Journal of Korean Society of Rural Planning
• /
• v.24 no.1
• /
• pp.11-19
• /
• 2018

The purpose of this study was to analyze the participant's perception of importance and performance of rural tourism network products that are linked with local resources, and propose the implications on the development direction of such products. The focus is on helping rural tourism network products acquire competencies that will help them evolve their business and differentiate themselves. To reach these objectives, a survey was designed through theoretical research on the motive of rural tourism and on agritourism networks. The survey was carried out on visitors to rural communities that produce rural tourism network products from November, 2015, to January, 2016 using 165 copies of a questionnaire after distributing 175 copies. The first quadrant continue and sustain', an area of high importance and high performance, included trial program components, stress reduction, getting away from daily routines, gaining new experiences, comfort, experiencing rural culture, travel expenses, and making memories with family. The second quadrant 'requires intensive improvement', an area of high importance but low performance, included having diverse trial programs, refreshment, experiencing agriculture, and education of children. Therefore, continuous interest is required for the area of 'maintenance' just as it is for activating educational farms in rural communities and a more fundamental improvement in the operation should be made for the area of 'intensive management'.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.1
• /
• pp.11-21
• /
• 2015

When designing Water Distribution System (WDS), determination of life cycle for WDS needs to be preceded. And designer should conduct comprehensive design including maintenance and management strategies based on the determined life cycle. However, there are only a few studies carried out until now, and criteria to determine life cycle of WDS are insufficient. Therefore, methodology to determine life cycle of WDS is introduced in this study by using Life Cycle Energy Analysis (LCEA). LCEA adapts energy as an environmental impact criterion and calculates all required energy through the whole life cycle. The model is build up based on the LCEA methodology and model itself can simulate the aging and breakage of pipes through the target life cycle. In addition the hydraulic analysis program EPANET2.0 is linked to developed model to analyze hydraulic factors. Developed model is applied to two WDSs which are A WDS and B WDS. Model runs for 1yr to maximum 100yr target life cycle for both WDSs to check the energy tendency as well as to determine optimal life cycle. Results show that 40yr and 54yr as optimal life cycle for each WDS, and tendency shows the effective energy is keep changing according to the target life cycle. Introduced methodology is expected to use as an alternative option for determining life cycle of WDS.

• Journal of Korean Academy of Nursing
• /
• v.32 no.5
• /
• pp.735-742
• /
• 2002

This study was conducted to identify the pain characteristics, family support and physical functioning and to determine predictors of the quality of life in aged women with chronic pain. Method: The questionnaires were collected through direct interview by a trained research assistant from July 2 to August 24, 2001. Subjects were 108 women clients with chronic pain over 65 years of age. Data analyzed frequency, percentage, mean, Pearson's correlation, ANOVA and stepwise multiple regression by SAS. Result: Care providers were mostly spouses and daughters in law. Care providers who took care of elderly for a few hours a day had the highest percentile. Aged women had persistently had chronic pain of moderate intensity and was moderately satisfied with pain management. The mean score of disability due to pain was 3 on a 10 point scale. The mean scores of physical function and quality of life were moderate and there were negative correlations between pain characteristics, physical functioning, and quality of life at the range from r=-.46 to r=-.83. Satisfaction with care, duration of pain, disability due to pain, and physical functioning accounted for 56% of the variance in perceived quality of life for aged women with chronic pain. Disability due to pain was the most predictable variable of quality of life and physical function was the second .Conclusion: The results suggest that care by family, education in pain control, prevention of disability, and maintenance of physical function are important to improve and maintain quality of life in aged women with chronic pain. Therefore, there is a need for program development that enhance family support and nursing intervention that focuses on active pain control.

• KIEAE Journal
• /
• v.12 no.6
• /
• pp.77-84
• /
• 2012

The current architectural design of unit modular has been based on 2D of CAD program, so unit modular character which needs unit information management, as a dried-member system, has no effect on design process. The purpose of this study is We have developed a suitable BIM design process, according to various works of construction, then tried to contribute to supply and activation of the urban-life-housing based on unit modular. The BIM modeling process based on unit modular has been in order of unit combination with preparing manual classification, and, it has been constructed, at construction site, from housing foundation to roof finish by Bottom-up method. At a manufacturing factory, it has been produced in order of 1) grouping materials and parts, 2) fabricating unit boxes, and 3) interference examination of unit boxes, and each order has been classified as housing structure, architecture, plumbing process separately. At a construction site, the fabrication has been done in order of, like as a real housing construction scenario, 1) RC foundation work 2) unit module job-site-fabrication work, 3) roof truss work, 4) plumbing and HVAC work, and 5) housing interior finish work. After modeling process, the interference examination on each work of construction has finally completed modeling. The Unit modular utilizing BIM modeling can make easy housing maintenance through systematic control with preparing manual of unit module information, and securing accurate and speedy construction information. And it will promote design credibility and create maximum effect of unit modular construction method, such as construction period reduction and upgrade of construction quality, etc., through the computer simulation as real as construction environment in cyber space, and with the interfering examination.