• 제목/요약/키워드: magnetic recording head

검색결과 46건 처리시간 0.029초

FUTURE HEAD/MEDIA TECHNOLOGIES IN RIGID DISK DRIVES

  • Byun, Chong-Won
    • 한국자기학회:학술대회 개요집
    • /
    • 한국자기학회 1994년도 춘계연구발표회 논문개요집
    • /
    • pp.12-13
    • /
    • 1994
  • Magnetic recording is still considered to be a.leader in storage industries in general. The rigid disk drive, in particular, has an advantage over tape, optical, magneto-optical, or flash memories, because of high areal density and fast access time with reasonably low cost per Mbyte. However, to be competitive in the market and to keep an edge over other storage devices, head and media in rigid disk drives require better performance per cost and more aggressive improvement in areal density, as shown in Fig. 1, than before. In this review paper, the future trend in head/media technologies of the rigid disk drive has been reviewed. Thin film media and thin film inductive/MR heads will be mainly discussed, since they are expected to be dominant in the future high-end drives over other technologies, such as particulate media or MIG heads.(omitted)mitted)

  • PDF

마그네틱 헤드 슬라이더의 極小 空氣膜에 대한 定常狀態 解析 (Steady State Analysis of Magnetic Head Slider at Ultra Low Clearance)

  • 장인배;한동철
    • 대한기계학회논문집
    • /
    • 제13권4호
    • /
    • pp.764-770
    • /
    • 1989
  • This paper analyze the steady state performance of a self-acting air lubricated slider bearing in hard disk/head system. Modified Reynolds' equation is derived from the steady state compressible Navier-Stokes equation, under slip-flow conditions. Finite difference technique and numerical procedure are described by using Newton-Raphson iteration method to slove the non-linear equations. These techniques are applied to conventional slider bearings and the effects of molecular mean free path(MMFP) for a recording surface of hard disk are shown. The calculation procedure developed here, wide applicabilities in practical head design procedures, and converges rapidly.

Magnetoresistance and Strain in Permalloy Films

  • Ohsung Song;Yasushi Maeda
    • Journal of Magnetics
    • /
    • 제3권1호
    • /
    • pp.36-38
    • /
    • 1998
  • We measure the magnetoresistance (MR) of sputtered Permalloy ($Ni_{83}Fe_{17}$) films with external strains produced by piezoelectric tranducer actuators. We observe that the MR raito was increased by 2.3 times by a compressive strain of $3.5{\times}10^{-4}$ compared to that of the as-deposited film. Tensile strains and compressive strains reduced the MR ratio. These observations suggest that it is possible to tune the MR properties through the use of the external strains. We expect to apply the results for the multi-head magnetic recorders with selectively activated recording heads.

  • PDF

SLIDERS FOR THE NEXT GENERATION MAGNETIC HARD DISK DRIVE SYSTEMS-NUMERICAL SIMULATION

  • Jhon, Myung-S.;Peck, Paul-R.;Kang, Soo-Choon;Wang, Benjamin-L.;Kim, In-Eung;Park, Ki-Ook
    • 한국자기학회지
    • /
    • 제5권5호
    • /
    • pp.695-701
    • /
    • 1995
  • Fundamental issues and general procedures of modeling the head disk interface (HDI) in order to provide design criteria for future ultra-low flying sliders are given. Intermittent contact and gaseous rarefaction effects are discussed using nonconventional kinetic theory. To illustrate the simulation results, we modeled IBM 3370 taper flat sliders and positive/negative "bow tie" sliders. Several alternative HDI concepts for future disk drives - viscoelastic bearings, a hybrid system, and contact recording - are also briefly discussed.

  • PDF

DVCR용 ATF(Automatic Track Following) 블록의 새로운 설계 (A New Design of an ATF Block for DVCRs)

  • 조성일;김성욱;하인중;김정태;나일주
    • 전자공학회논문지S
    • /
    • 제35S권8호
    • /
    • pp.106-112
    • /
    • 1998
  • 최근에 영상 및 음성 데이터의 양은 크게 증가하고 있다. 이러한 경향에 따라 고밀도 자기기록 시스템이 필요하게 되었고 테이프의 트랙은 더욱 더 좁아지게 되었다. 따라서 DVCR(digital video cassette recorder)에서는 재생시에 캡스탄 모터의 속도와 위상을 정밀하게 제어하여, 헤드가 트랙을 따라 정확하게 주행하도록 유지시켜주는 캡스탄 서보시스템이 필요하게 되었다. 이를 위하여 DVCR에서는 ATF(Automatic Track Following)방식을 사용한다. 본 논문에서는 이산 푸리에 변환(discrete Fourier transform)을 이용한 새로운 DVCR용 ATF 블록의 설계방법을 제안하였다. 제안한 ATF 블록을 ALTERA사의 FPGA에 구현하여 실제 DVCR 시스템에서 그 성능을 시험하였다. 실험을 통하여 본 논문에서 제안한 방식이 기존의 디지털 저역통과필터(lowpass filter)를 사용한 구현법에 비해 비용면에서 더 효과적임을 검증하였다. 또한 로직게이트 수가 기존의 방법에 비하여 약 20% 감소함을 확인하였다.

  • PDF

두개하악장애와 두부전방자세와의 관계 (Relationship between Forward Head Posture and Craniomandibular Disorders)

  • Kyung-Soo Han
    • Journal of Oral Medicine and Pain
    • /
    • 제19권1호
    • /
    • pp.137-149
    • /
    • 1994
  • This study was performed to investigate the relationship between Forward Head Posture(FHP) and Craniomandlbular Disorders(CMDs). Many studies reported that there was some relationship between them, however, there is still controversy. So It Is necessary to observe and compare many more patients with CMDs wirh normal controls. For the study 85 patients with CMDs and 37 dental students were selected as experimentals and controls, respectively. And the experimentals were classified Into two groups, that is, TMJ internal derangement group and muscle disorders group according to clinical diagnosis. For measuring the FHP, CROM(Cervical-Range-of-Notion)was used. This goniometer is composed of three part. First, gravity goniometer for flexion and extension. Second, magnetic compass and yoke for rotational movement. And last, forward head arm and vertebra locator for forward head posture. Next T-Scan, electronic occlusal analyzer, was used for recording of occlusal contact state. Other items such as maximum opening, lateral excursion, Helkimo's anamnestic index, and muscle palpation point from Friction's craniomandibular index were checked clinically by one examiner. The result of this study were as follows : 1. In male, control group showed much more measurement in resting forward head posture than did experimental group. But there were not significant differences between groups in female subject. From this results, the author contended that CROM is new measuring system and differ from other goniometers in some aspect, so that results should be re-evaluated 2. Mean value of maximum mouth opening in nearly all groups were greater than 40mm. and mouth opening had a significant correlation with occlusal force and with anamnestic index both sex. 3. Mean value of palpation point had not any correlationship with forward head posture in both sex, but there was significant difference between upper and lower group by rounded shouldes. 4. In summary, there was no significant relationship between forward head posture and sign and symptom of Craniomandibular Disorders.

  • PDF

스마트멀티카드를 위한 동적자장모사장치의 개발 (Development of Dynamic Magnetic Field Emulator for Smart Multi-Card)

  • 배재호
    • 산업경영시스템학회지
    • /
    • 제40권4호
    • /
    • pp.183-190
    • /
    • 2017
  • This paper proposes a dynamic magnetic field emulator (DMFE), which can electrically emulate information for the magnetic stripes of most widely used credit cards. Payment transactions with most common credit cards are performed by reading the card's information, encoded in magnetic stripes, using the reader head of a point-of-sale (POS) system. A stripe-type permanent magnet is attached to the back side of the credit card, and information for payments or value-added service is reorganized by exposing it to strong magnetic field. The process of data recording and retrieving as stated above has been pointed out as a major cause of illegal credit card use, because the information on the magnetic stripe is always exposed, and is thus vulnerable to forgery or alteration. A dynamic magnetic field emulator displays card information only when necessary by using the principle of solenoidal magnets. The DMFE proposed in this paper can prevent fraudulent use if it is operated with a device, like a smart phone, or a separate user-authentication procedure. In addition, because it is possible to display various information as needed, it can be utilized for a smart multi-card application, in which information for multiple cards is stored in one card, and can be selected and used as needed. This paper introduces the necessity of the DMFE and its manufacturing principles. As a result, this study will be helpful for making various application cases in payment, which is a core area of the Fintech (a newly-coined word of finance and technology) industry.

컴퓨터 정보저장용 상변화형 광기록매체 (Phase-change optical media for computer data storage)

  • 김명룡
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제8권2호
    • /
    • pp.229-236
    • /
    • 1995
  • Multimedia has created a system environment that needs a combination of diverse peripherals, faster I/O, and easier configuration. The sheer volume of data one can expect with multimedia hardware and applications storage systems of higher capacity and faster data transfer rate. Unlike the magneto-optical(MO)disk technology which uses bias magnetic field in writing, both the reading and the writing in the phase change (PC) technology are performed only by laser light. In PC optical media, an active layer is reversibly converted between amorphous state and crystalline state by changing irradiation conditions of focused laser beam. Thus, as compared with MO disk, the PC disk has such great advantages that signals can be reproduced by change of reflectance of laser beams in the same manner as the compact disc. The reflectivity of a phase-change spot can be altered in a single pass under the head only through modulation of laser power. The principles and the current status of phase-change optical recording media combined with possible applications are discussed in the present article.

  • PDF

하드 디스크 드라이브 시스템의 747 곡선 시뮬레이션 (The Simulation of 747 Curve for Hard Disk Drive System)

  • 서정교;조순철;김용수;박노열
    • 한국자기학회지
    • /
    • 제7권2호
    • /
    • pp.97-102
    • /
    • 1997
  • 자기헤드의 오프트랙 성능은 하드디스크 드라이브에서 트랙 피치를 결정하는데 사용되고 오프트랙 성능이 트랙 피치에 관한 함수가 747 곡선이다. 본 논문에서는 747 곡선을 컴퓨터를 이용하여 시뮬레이션 하였다. 헤드의 측면재생과 기록변수는 3차원 유한요소법을 이용한 자장해석을 이용하여 구하였고, 신호대 잡음비 (signal to noise ratio : SNR) 계산을 위한 헤드의 재생 신호와 잡음은 가역정리를 이용하여 구하였다. 생성된 747 곡선에 의하면, 소거밴드의 폭이 클수록 또한 유효 신호대 잡음비 SNR$_{eff}$이 작을 수록 오프트랙의 성능이 향상되었다. 기록된 트랙폭이 4.1 .mu. m 인 평면 실리콘 헤드를 사용하여 시뮬레이션으로 생성된 747 곡선과 스핀 스탠드 (spin stand)로 측정된 747 곡선을 비교했을 때, 두 곡선이 비슷하였으며 이로부터 본 시뮬레이션의 타당성을 입증할 수 있었다.다.

  • PDF