• 한국자기학회지
• /
• 제6권2호
• /
• pp.117-121
• /
• 1996

육각판상 Ba-ferrite의 stacking 현상은 자성도료의 도포 후 자장배향를 행할 때 일어나는 것으로 알려져 있으나 분말의 건식분쇄시에도 일어났다. Edge mill을 사용하여 건식분쇄할 때 치환형 Ba-ferrite 분말의 보자력과 tap density는 거의 비례적으로 증가하였고, 분쇄시간보다는 가해지는 압력에 크게 의존하였다. 이 때 보자력의 증가원인은 분쇄시 생성되는 입자간의 stacking 현상에 기인된 것임을 투과전자현미경 관찰로부터 확인하였다. 분말의 tap density가 증가함에 따라 tape에서 분산초기의 광택도가 크게 감소되어 분산성은 떨어졌으나, 배향도는 tap density 1.3 g/$cm^{3}$에서 최대를 나타내었다. 과도한 건식분쇄에 의해 생성된 강고한 stacked cluster는 자성도료 제조시 분산성과 배향도를 동시에 떨어뜨리는 역할을 함을 알 수 있었다.

• Nuclear Engineering and Technology
• /
• 제49권1호
• /
• pp.189-195
• /
• 2017

Gel dosimeters have unique advantages in comparison with other dosimeters. Until now, these gels have been used in different radiotherapy techniques as a reliable dosimetric tool. Because dose distribution measurement is an important factor for appropriate treatment planning in different radiotherapy techniques, in this study, we evaluated the ability of the N-isopropylacrylamide (NIPAM) polymer gel to record the dose distribution resulting from the mixed neutron-gamma field of boron neutron capture therapy (BNCT). In this regard, a head phantom containing NIPAM gel was irradiated using the Tehran Research Reactor BNCT beam line, and then by a magnetic resonance scanner. Eventually, the $R_2$ maps were obtained in different slices of the phantom by analyzing T2-weighted images. The results show that NIPAM gel has a suitable potential for recording three-dimensional dose distribution in mixed neutron-gamma field dosimetry.

• 대한기계학회논문집
• /
• 제13권4호
• /
• pp.764-770
• /
• 1989

This paper analyze the steady state performance of a self-acting air lubricated slider bearing in hard disk/head system. Modified Reynolds' equation is derived from the steady state compressible Navier-Stokes equation, under slip-flow conditions. Finite difference technique and numerical procedure are described by using Newton-Raphson iteration method to slove the non-linear equations. These techniques are applied to conventional slider bearings and the effects of molecular mean free path(MMFP) for a recording surface of hard disk are shown. The calculation procedure developed here, wide applicabilities in practical head design procedures, and converges rapidly.

• 한국표면공학회지
• /
• 제31권4호
• /
• pp.217-222
• /
• 1998

The Facing Targets Sputtering(FTS) system has several advantages for preparing films over a wide range of working gas pressure on plasma-free substrates. Co-Cr thin films seem to be one of the most promising media for perpendicular magnetic recording system. In this study, the capabillities of the system fordepositing C0-Cr films have been investigated. Under various Ar gas pressure, films with morphologically dense microstructure and good c-axis orientation were deposited, even when the incident angle $\psi_x$ of sputtered part icles to the film plane was below abount $50^{\circ}C$. this may imply that the shadowing effect by obique incidence of particle can be compensated by rapid surface diffusion owing to the high kinetic energy of particles arriving at the growing film. It has been confirmed that the FTS system is very useful for perparing Co-Cr thin films recorging media.

• 한국분말재료학회지
• /
• 제11권3호
• /
• pp.242-246
• /
• 2004

FePt nanoparticles for high-density magnetic recording media were synthesized by the simultaneous chemical reduction of Fe(acac) $_2$ and Pt(acac) $_2$ with 1,2-hexadecanediol as the reducing reagent. TEM images showed that the shape of as-synthesized FePt nanoparticle was spherical and average particle size was 3 nm. Also, SAD pattern showed that crystal structure was disordered FCC (face centered cubic). These FCC structured nanoparticles were transformed FCT (face centered tetragonal) structure by annealing at 55$0^{\circ}C$ for 30 min in Ar atmosphere. XRD analysis revealed that as-synthesized FePt nanoparticles were transformed from disordered FCC to ordered FCT. Finally, the coercivity of 2 kOe for FePt nanoparticles with FCT structure was obtained by VSM measurement.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1063-1065
• /
• 1993

LDM, easy to minute position control, is using as X-Y plotter or other recording instruments. Brushless LDM has better properties than the conventional Brush type LDM in many aspects. This paper presents magnetic flux density distribution by FEM and a way to reduce thrust force ripple particurary in low speed drive. And we apply this method to a real mode of LDM. This LDM is operated by IBM-PC host computer and uses rotary encoder to make position signal.

• Bulletin of the Korean Chemical Society
• /
• 제19권1호
• /
• pp.5-21
• /
• 1998

The purpose of this paper is to show that X-ray absorption spectroscopy (XANES and EXAFS) is a powerful technique for characterizing both crystalline and amorphous solids from structural (local order) and electronic point of view. The principle of this technique is briefly described by showing the main factors which must be considered for recording and fitting the experimental results. Some non-trivial examples have been selected for demonstrating that XAS spectroscopy is the only technique for bringing a definitive answer as for example: the determination of the local distortion of the $NiO_6$ octahedra in the $Li_{1-z}Ni_{1+z}O_2$ layered oxides and the evidence of the presence of copper pairs in the NASICON-type phosphate $CuZr_2 (PO_4)_3$. Are also reported some significant examples for which XAS spectroscopy is decisive with other characterization methods as (i) Raman spectroscopy for glasses (ii) Mossbauer spectroscopy for $LiNi_{1+z-t}Fe_To_2$ oxides (iii) magnetic measurements for Ce-based intermetallic compounds.

• 한국재료학회지
• /
• 제21권4호
• /
• pp.216-219
• /
• 2011

Perovskite manganites such as $RE_{1-x}A_xMnO_3$ (RE = rare earth, A = Ca, Sr, Ba) have been the subject of intense research in the last few years, ever since the discovery that these systems demonstrate colossal magnetoresistance (CMR). The CMR is usually explained with the double-exchange (DE) mechanism, and CMR materials have potential applications for magnetic switching, recording devices, and more. However, the intrinsic CMR effect is usually found under the conditions of a magnetic field of several Teslas and a narrow temperature range near the Curie temperature ($T_c$). This magnetic field and temperature range make practical applications impossible. Recently, another type of MR, called the low-field magnetoresistance(LFMR), has also been a research focus. This MR is typically found in polycrystalline half-metallic ferromagnets, and is associated with the spin-dependent charge transport across grain boundaries. Composites with compositions $La_{0.7}(Ca_{1-x}Sr_x)_{0.3}MnO_3)]_{0.99}/(BaTiO_3)_{0.01}$ $[(LCSMO)_{0.99}/(BTO)_{0.01}]$were prepared with different Sr doping levels x by a standard ceramic technique, and their electrical transport and magnetoresistance (MR) properties were investigated. The structure and morphology of the composites were studied by X-ray diffraction (XRD) and scanning electronic microscopy (SEM). BTO peaks could not be found in the XRD pattern because the amount of BTO in the composites was too small. As the content of x decreased, the crystal structure changed from orthorhombic to rhombohedral. This change can be explained by the fact that the crystal structure of pure LCMO is orthorhombic and the crystal structure of pure LSMO is rhombohedral. The SEM results indicate that LCSMO and BTO coexist in the composites and BTO mostly segregates at the grain boundaries of LCSMO, which are in accordance with the results of the magnetic measurements. The resistivity of all the composites was measured in the range of 90-400K at 0T, 0.5T magnetic field. The result indicates that the MR of the composites increases systematically as the Ca concentration increases, although the transition temperature $T_c$ shifts to a lower range.

• Annals of Clinical Neurophysiology
• /
• 제8권1호
• /
• pp.29-35
• /
• 2006

Background: Transcranial magnetic stimulation (TMS) is a non-invasive diagnostic method particularly suited to investigation the long motor tracts. The clinical value of TMS in most spinal cord diseases has still to be made. Diagnostic value of magnetic motor evoked potential (MEP) parameters in intramedullary spinal cord lesions was investigated. Methods: MEP elicited by TMS was recorded in 57 patients with clinically and radiologically defined intramedullary myelopathy. Twenty five patients with cervical myelopathy (CM) and 32 thoracic myelopathy (TM) were included. Recordings were performed during resting and minimal voluntary contraction at both abductor pollicis brevis (APB) and tibialis anterior (TA) muscles. Stimulation threshold(ST), amplitude, and central motor conduction time (CCT) were measured at resting and facilitated conditions. CCT was calculated by two means; central motor latency (CML)-M using magnetic transcranial and root stimulation, and CML-F using electrical F-wave study. The results were compared between patient groups and 10 normal control group. Results: Facilitated mean ST recorded at TA was elevated in both CM and TM compared with control group. Resting mean CML-M at TA was significantly prolonged in both CM and TM, and CML-M was absent or delayed in 37.1% of CM and 8% of TM at APB with facilitation. Facilitated mean MEP amplitude at ABP was lower in CM than in TM, while MEP/M ratios were not different significantly between groups. Conclusions: Magnetic motor evoked potential has diagnostic value in intramedullary myelopathy and localizing value in differentiating between CM and TM by recording at APB and TA. It is a noninvasive way to investigate the functional status of motor tracts of spinal cord.

• 한국자기학회지
• /
• 제16권6호
• /
• pp.283-286
• /
• 2006

고밀도 자기기록용 Ba-페라이트/$SiO_{2}$ 자성박막에서 계면확산 장벽으로써 ${\alpha}-Al_{2}O_{3}$ 버퍼층의 역할을 연구하였다. 열처리동안 $1900{\AA}$의 두께를 가진 비정질 Ba-페라이트/$SiO_{2}$ 박막에서 계면확산은 약 $700^{\circ}C$에서 일어나기 시작하였다. 열처리온도를 $800^{\circ}C$까지 증가시켰을 때, 계면확산은 자기특성을 저하시킬 정도로 급격히 진행되었다. 고온에서의 계면확산을 억제하기 위하여, $110{\AA}$ 두께의 ${\alpha}-Al_{2}O_{3}$ 버퍼층을 Ba-페라이트/$SiO_{2}$ 박막의 계면에 증착하여 사용하였다. Ba-페라이트/${\alpha}-Al_{2}O_{3}/SiO_{2}$ 박막에서는 $800^{\circ}C$의 고온까지 열처리하여도 계면확산이 심각하게 일어나지는 않았다. ${\alpha}-Al_{2}O_{3}$ 버퍼층에 의하여 계면확산이 억제되기 때문에 Ba-페라이트 자성박막의 포화자속밀도와 보자력이 향상되었다. 따라서 Ba-페라이트/$SiO_{2}$ 박막의 계면에서 ${\alpha}-Al_{2}O_{3}$ 버퍼층은 $SiO_{2}$ 기판 성분의 계면확산 장벽으로 사용될 수 있다.