There is growing interest in power inductors in which metal soft magnetic powder and epoxy resin are combined. In this field, the process technology for increasing the packing density of magnetic particles in an injection molding process is very important. However, little research has been reported in this regard. In order to improve the packing density, we investigated and compared the sedimentation heights of pastes for three types of soft magnetic alloy powders as a function of the mixing ratios and the type of resin used. Experimental results showed that the packing density was the highest (71.74%) when the mixing ratio was 80 : 16 : 4 (Sendust : Fe-S : CIP) according to the particle size using an SE-4125 resin. In addition, the packing density was found to be inversely related to the layer separation distance. As a result, it was confirmed that the dispersion of solid particles in the paste was important for curing; however, the duration of the curing process can greatly affect the packing density of the final composite.
최근에 정자기장을 사용하는 새로운 기술이 개발되어 인체가 정자기장에 노출될 가능성이 커지게 되어 건강에 영향을 줄 우려도 증가되었다. 여러 나라에서 정부를 비롯한 권위 있는 기관들이 주로 자기공명 영상법(MRI)이나 고에너지물리학에서의 입자가속기와 같은 특수 용도를 위해 노출한도를 제시해 왔다. 산업적인 면과 의학에서의 정자기장의 응용이 앞으로 더 많아져서 직업적이거나 일반공중이거나 간에 노출 가능성이 증가되고, 또 정자기장(static magnetic field)에 영향을 받는 강자성(强磁性) 이식조직 이나 전자장치를 부착한 사람들의 수도 증가하고 있으므로 국제적인 노출한도에 대한 지침이 필요하게 되었다. 본고에서는 비 이온화방사선(NIR)에 대한 국제방사선방어학회/비이온방사선방어위원회(IRPA/ICNIRP)의 제반지침을 검토하기 위하여 이 IRPA/ICNIRP(이전의 INIRC의 것도 포함)의 기본지침 중 정자기장에 대한 노출한도에 관한 지침을 택하여 논하였다.
Although Titanium material has superior properties, it belongs to difficult-to-machine materials. The present research applies magnetic abrasive finishing to precision machining of internal-face of titanium pipes, and analyzed & assessed the influence of grinding conditions on magnetic abrasive effects through the removed amount and surface roughness of materials. There was the influence on grinding properties according to change of rotational speed, a total input of mixed powder and an input of grinding liquid, and when the total input, rotational speed and ratio of electrolytic iron versus magnetic abrasives are 8g and 1000rpm, it was most advantageous in aspects of surface roughness and material removal amount, and the grinding liquid remarkably improved the surface roughness and material removal amount only with addition of trace amounts of light oil rather than dry machining conditions. And a result of considering the influence on grinding properties by using an inert gas (Argon gas) for improving grinding properties of the internal-face of titanium pipe, the present research has obtained improvement effects in the removal amount and surface roughness through utilization of an inert gas.
핵 및 방사능전 상황에서 방사선에 의한 인명피해를 줄이기 위한 방안으로서 유개호에 자철석이 포함된 중량 콘크리트의 적용 가능성을 확인해보았다. 이에 본 연구에서는 자철광 콘크리트의 방사선 차폐효과를 분석하기 위하여 감마선원을 사용하여 차폐실험을 진행하였고 실험조건과 동일한 몬테칼로 모델링도 하였다. 그 결과 자철광의 함량이 증가할수록 감마선에 대한 차폐효과가 향상됨을 확인할 수 있었다. 향후 자철광 콘크리트가 군사적 목적의 시설물에 적용될 경우 방사선 차폐 측면에서 효과를 얻을 수 있을 것이라 기대한다.
Metal-p-$NH_2$-Bn-DOTA (paraammionobenzyl-1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid: ABDOTA) complex was synthesized and purified for bio-tagging to quantify biological target materials using laser ablation (LA)-ICP-MS. Since the preparation of a pure and stable tagging complex is the key procedure for quantification, magnetic particles were used to purify the synthesized metal-ABDOTA complex. The magnetic particles immobilized with the complex attracted to a permanent magnet, resulting in fast separation from free un-reacted metal ions in solution. Gd ions formed the metal-complex with a higher yield of 64.3% (${\pm}3.9%$ relative standard deviation (RSD)) than Y ions, 52.3% (${\pm}2.5%$ RSD), in the pH range 4-7. The complex bound to the magnetic particles was released by treatment with a strong base, of which the recovery was 81.7%. As a reference, a solid phase extraction (SPE) column packed with Chelex-100 resin was employed for separation under similar conditions and produced comparable results. The tagging technique complemented polydimethylsiloxane (PDMS) microarray chip sampling in LA-ICP-MS, allowing determination of small sample volumes at high throughputs. For application, immunoglobulin G (IgG) was immobilized on the pillars of PDMS microarray chips and then tagged with the prepared Gd complex. IgG could then be determined through measurement of Gd by LA-ICP-MS. A detection limit of 1.61 ng/mL (${\pm}0.75%$ RSD) for Gd was obtained.
Alnico magnets can be used as magnetic bearings for the precise electric power measuring instruments such as watt-hour meters because they have high remanence ($B_r$), relatively high maximum energy product ($(BH)_{max}$), and excellent temperature stability. In this study, Alnico composite magnets were fabricated by appropriately mixing alnico alloy powders with epoxy resin and binder. The Alnico powders mixed with epoxy resin and a hardening agent with a mixing ratio of 96:4 were pressed and then cured to be a toroid-type ring magnet with an outer diameter (${\Phi}_{out}$) of 15 mm, an inner diameter (${\Phi}_{in}$) of 6.5 mm and a thickness (t) of 2.5 mm, respectively. The magnetic properties of the Alnico ring magnets were varied with the mixing ratio of Alnico powders that possess different average particle sizes. The Alnico ring magnet prepared by mixing 5 wt% of $50{\mu}m$ (small size) powder, 15~20 wt% of $150{\mu}m$ (medium size) powder, and 75~80 wt% of $300{\mu}m$ (large size) powder showed the best magnetic properties (remanent induction, coercive force, maximum energy product, and surface flux density). In addition, measurements of temperature and moisture characteristics for the Alnico ring magnets showed that the surface flux densities of the N and S poles decreased little and the repulsive distance between the magnets decreased as small as 0.05 mm after 10 days.
Sung-Min, Kim;Eun-Ji, Cha;Do-Hun, Kwon;Sung-Uk, Hong;Yeon-Joo, Lee;Seok-Jae, Lee;Kee-Ahn, Lee;Hwi-Jun, Kim
한국분말재료학회지
/
제29권6호
/
pp.459-467
/
2022
Soft magnetic powder materials are used throughout industries such as motors and power converters. When manufacturing Fe-based soft magnetic composites, the size and shape of the soft magnetic powder and the microstructure in the powder are closely related to the magnetic properties. In this study, Fe-Si-Al-P alloy powders were manufactured using various manufacturing process parameter sets, and the process parameters of the vacuum induction melt gas atomization process were set as melt temperature, atomization gas pressure, and gas flow rate. Process variable data that records are converted into 6 types of data for each powder recovery section. Process variable data that recorded minute changes were converted into 6 types of data and used as input variables. As output variables, a total of 6 types were designated by measuring the particle size, flowability, apparent density, and sphericity of the manufactured powders according to the process variable conditions. The sensitivity of the input and output variables was analyzed through the Pearson correlation coefficient, and a total of 6 powder characteristics were analyzed by artificial neural network model. The prediction results were compared with the results through linear regression analysis and response surface methodology, respectively.
$\alpha$-F $e_2$$O_3$, 나노 입자를 균일한 크기로 제조하여 Morin 전이 온도( $T_{M}$)를 전 후로 스핀의 변화에 관하여 연구하였다. X-선 회절 분석과 입도분포 측정을 통하여 입자는 80nm정도의 매우 군일한 크기 분포를 하고 있음을 확인하였다. Mossbauer 분광기를 통하여 4.2K에서부터 실내온도까지 여러 온도 범위에 걸쳐 측정한 결과 입자의 크기에 따라 $T_{M}$온도가 변화되었고 스핀의 상태 역시 달라졌다. $T_{M}$은 $b_{ulk}$상태에서 265 K의 값을 가지고 있으나 입자의 크기가 작아질수록 낮아지고, 임계 크기 이하에서는 전이가 전혀 일어나지 않는다. 80nm크기의 입자에서, 스핀의 방향은 $T_{M}$ 이상의 온도에서는 정상적으로 hexagonal구조의 c축에 90$^{\circ}$ 이루고 있으나 $T_{M}$ 이하의 온도에서는 c 축에 나란하지 않고 일정한 각(28$^{\circ}$~29$^{\circ}$)을 유지하는데, 이 방향은 rhombohedral구조의 [110]에 해당하는 것으로 지금까지 알려진 0$^{\circ}$와 90$^{\circ}$사이의 스핀 전이와는 다른 모습을 보여주고 있다.
Sol-gel 법을 이용하여 Fe$_3$O$_4$ 분말을 합성하였으며, 합성한 분말의 구조적 특성, 입자의 모양 및 크기, 자기적 특성에 관하여 연구하였다. 두 가지의 다른 성분비 (Fe$^{2+}$와 Fe$^{3+}$의 몰 당량비를 1 : 2와 Fe$^{2+}$ 만을 사용)와 2-methoxyethanol 용매를 사용하여 refluxing한 후, 질소 분위기에서 200$\sim$600$^{\circ}C$로 열처리하여 페라이트 분말을 합성할 수 있었다. X-선 회절기를 이용하여 합성한 시료의 결정구조를 확인한 결과 두 경우 모두 250$^{\circ}C$ 이상의 열처리로 단일상의 spinel 페라이트가 만들어짐을 확인할 수 있었다. 전계방출 주사전자현미경을 이용하여 관측한 결과에 의하면 열처리 온도가 높아짐에 따라 입자의 크기 증가를 관측할 수 있었다. Mossbauer 분광 실험에서 입자의 크기 변화에 따른 상자성체에서 준강자성체로의 전이를 관측할 수 있었다. 몰 당량비를 1 : 2의 비율로 혼합 후 250$^{\circ}C$에서 열처리한 분말은 크기가 상자성체와 준강자성체의 경계에 위치하며 이중 78%의 시료는 준강자성체의 특성을 22%의 분말은 상자성체의 특성을 가짐을 알 수 있었다. Fe$^{2+}$ 이온만을 사용하는 만든 Fe$_3$O$_4$ 분말은 200$^{\circ}C$의 열처리로 spinel 구조를 가지나 입자의 크기가 작아서 상자성체의 특성을 지닌다. 250$^{\circ}C$ 이상에서 열처리한 시료는 준비 방법에 무관하게 전형적인 Fe$_3$O$_4$ 분말의 연자성 특성을 보이고 있으며, 열처리 온도가 높아감에 따라 포화자화가 증가하고 보자력 또한 증가하는 것을 확인할 수 있었다.
I사의 전기로 제강 슬래그(이하 슬래그)는 상당량의 금속철(metal Fe)과 wustite(FeO), magnetite(Fe$_3$O$_4$), gehlenite(${CaAl}_{2}{SiO}_{7}$) 및 monticellite(CaMgSiO$_4$)등으로 구성된다. 슬래그에 함유된 금속철(Fe 품위: 95%이상)을 회수하기 위해서는 금속철을 단ㄱ체로 분리시키는 것이 바람직하며, 매립으로 활용할 수밖에 없는 슬래그를 단계적으로 파쇄하면 대부분의 금속철은 구상의 단체로 분리된다. 구상의 단체인 금속철의 크기에 따라 흡인되는 자장의 세기를 측정하면 금속철이 흡인되는 최소 자장의 세기는 약 100G로 거의 일정하다. 다단계로 파쇄한 슬래그를 100G의 자장에서 회수한 산물은 95%이상의 철분이 함유된 금속철이었으나, 자장의 세기를 증가시키면 철의 산화물 및 알칼리 토금속류의 화합물등도 함께 회수되므로 품위가 저하된다. 따라서 매립되는 슬래그를 다단계로 파쇠하고, 각 입도에서 100G로 자선하면 파쇄된 슬래그에 함유된 대부분의 금속철을 회수할 수 있다. I사에서 매립하는 35만톤의 슬래그를 다단계로 파쇄하는 경우에, 30~4.7mm의 입도에서는 매립되는 전체 슬래그중의 약 0.73%인 2천 5백톤 정도의 금속철이 100G의 자장에서 회수될 수 있고, 4.7~0.3mm서도 약 1.2%인 4천 2백톤 정도가 회수될 수 있다. 그러므로 자력선별로 회수할 수 있는 금속철은 매립되는 슬래그중의 약 1.9%인 6천 7백톤 정도가 된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.