• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권11호
• /
• pp.720-728
• /
• 2000

This paper describes the calculation of the equivalent circuit parameters and the characteristic analysis of a capacitor-run type single-phase induction motor by means of the finite element method in coupled with the conventional equivalent circuit model. The circuit parameters of the stator are calculated form the lumped parameter and the slot leakage reactance of the rotor with the closed slot can be obtained by the use of slot pitch boundary condition. From the analysis result this combined equivalent circuit and finite element method which is used slot pitch boundary condition is compared with the experimental results, the validity of the method is proved.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.233-243
• /
• 1998

The demand of high speed machining is increasing due to the high speed cutting and grinding provides high efficiency of process, short process time, improved metal removal capacity and better surface finish. Active magnetic bearings allow much high surface speed than conventional ball bearings and therefore greatly suitable for high speed cutting or grinding. This paper describes a design process of an active magnetic bearing system for a high speed grinding spindle with power 5.5kW and maximum speed 60,000rpm. Magnetic actuators are designed by the magnetic circuit theory considering static load condition, and examined with FEM analysis. Dynamic characteristics are also considered, such as bandwidth, stiffness, natural frequency and static deflection. System characteristics are simulated with a rigid rotor model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.918-920
• /
• 2003

This paper presents the analysis of the permanent magnet overhang effect for permanent magnetic actuator. Generally, The overhang is often used to increase the force density in permanent magnet machineries. The overhang is especially profitable to reduce the volume after increasing the force density per volume when using the overhang effect of the permanent magnet. Therefore, 3D Equivalent Magnetic Circuit Network Method (3D EMCNM) has been used in this paper. According to the plunger position, flux distribution per the overhang length, and the holding force are quantitatively compared. Furthermore, an appropriate length of the overhang has been proposed. To confirm the accuracy of the analysis method, the results of 3D EMCNM and FEM(2D, 3D) are compared for the basic model.

• Journal of Magnetics
• /
• 제16권2호
• /
• pp.140-144
• /
• 2011

We report on a numerical calculation study of two new functional properties in magnetic tunnel junctions (MTJs), negative dynamic resistance and RF amplification. The magnetic dynamics in a conventional CoFeB/MgO/CoFeB MTJ with in-plane magnetization was investigated using a macro-spin model simulation. To examine the influence of thermal fluctuations, random external magnetic fields were also included. Using a voltage controlled bias circuit, the negative dynamic resistance was obtained from time averaged I-V characteristics at both 0 K and 300 K under appropriate external magnetic fields and bias voltages. Using this negative dynamic resistance property, we demonstrated RF amplification with a 100 MHz high frequency signal. Sizable RF amplification gain was observed without thermal fluctuation. However, at 300 K, the RF signal was not amplified because low frequency magnetization dynamics were dominant.

• 대한전자공학회논문지SD
• /
• 제45권12호
• /
• pp.1-7
• /
• 2008

Magnetic Tunnel Junction (MTJ)는 비휘발성 소자로서 그간 기억소자분야에 국한되어왔으나, 최근 다양한 연구들에 의하여 자기논리 (magneto-logic) 회로에 사용되면서 기존 트랜지스터 기반의 논리연산자를 대체할 수 있는 가능성을 보이고 있으며, 논리회로까지 확장 적용되어 스핀전자공학 분야의 새로운 장을 열 것으로 기대되어지고 있다. 자체 저장 능력을 갖는 MTJ 소자로 구현된 자기논리 회로는 전원이 꺼져도 정보가 그대로 유지되고, 또한, 불 (Boolean) 연산 수행 시 단순한 입력변화만으로 다양한 논리 연산자 구현이 가능한 구조적인 유연성을 보이므로, 물리적으로 완성된 회로 내에서 얼마든지 재구성이 가능한 자기논리 회로를 구현할 수 있다. 본 논문에서는 단순한 조합논리나 순차논리 회로의 동작을 넘어서, 임의의 3비트 논리회로 동작을 모두 수행할 수 있는 자기논리 회로를 제안한다. 이를 위해 3비트 논리회로 중에서 최대의 복잡성을 갖는 논리회로를 MTJ 소자를 사용하여 설계하였고, 그 동작을 이전 논문에서 제안된 바 있는 macro-model을 보완 적용하여 검증하였다. 제안된 회로는 3비트로 구현할 수 있는 가장 복잡한 논리회로의 동작을 수행할 뿐만 아니라, 전류구동회로의 게이트 신호들을 변화시킴으로써 임의의 3비트 논리 회로의 동작을 모두 수행하는 것이 가능하다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.216-221
• /
• 2000

This paper describes the analysis results on the PT ferroresonance at 154 kV GIS (gas Insulated substation by EMTP(Electro- magnetic Transient Program). We had simulated the PT ferroresonance between a potential transformer(PT) and an open circuit breaker's grading capacitance. The ferroresonance leads to very large power frequency overvoltages on PT bus and subsequent insulation failure. The large power can be supplied to the PT by the high voltage on the opened circuit due to the grading capacitance and equivalent capacitance of the buses during the ferroresonance. The damping circuit connected on the secondary winding were considered in the model. The actual countermeasure include a saturable inductor and a resistor series-mounted, but the 2 ohms of damping resistance was used in the computationl model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2076-2079
• /
• 1999

This paper describes the analysis results on the PT ferroresonance at 154 kV GIS (gas Insulated substation by EMTP (Electro-magnetic Transient Program). We had simulated the PT ferroresonance between a potential transformer(PT) and an open circuit breaker's grading capacitance. The ferroresonance leads to very large power frequency overvoltages on PT bus and subsequent insulation failure. The large power can be supplied to the PT by the high voltage on the opened circuit due to the grading capacitance and equivalent capacitance of the buses during the ferroresonance. The damping circuit connected on the secondary winding were considered in the model. The actual countermeasure include a saturable inductor and a resistor series-mounted, but the 2 ohms of damping resistance was used in the computational model.

• 한국인터넷방송통신학회논문지
• /
• 제10권5호
• /
• pp.7-12
• /
• 2010

등가회로 모델을 바탕으로 Jerusalem AMC의 대역폭에 대하여 살펴보았다. 등가회로 모델과 어드미턴스 기울기 (Y')를 이용하여 다양한 파라미터의 변화에 따른 대역폭을 분석하였다. 기판의 두께 및 투자율은 대역폭을 향상시키는 반면, FSS grid의 부하(loading)에 의해 대역폭은 감소한다. FSS의 두 부하 중에서, 커패시터 부하가 인덕터 부하에 비해 대역폭 특성이 더 우수한 특성을 가진다. 인덕터 부하에 따른 대역폭 감소를 완화하기 위해 단일편파 특성을 가지는 AMC를 제안하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.771-773
• /
• 2001

In this paper, three dimensional Equivalent Magnetic Circuit Method(3-D EMCN method) a numerical analysis method which supplements to magnetic equivalent circuit adding numerical technique, is proposed for analysis Optical Pickup Actuator. (3) This method provides better characteristics both in precision of the analysis and in computation time than other analysis method such as three-dimensional Finite Element Method. We choose the simple 2-magnet moving coil type pickup actuator model and verify upper yoke effect using this method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.904-906
• /
• 2001

This paper presents a magnetic circuit design procedure by using Response Surface Methodology(RSM) to determine initial and detail design parameters for reducing torque ripple in BLDC motor of Electric Power Steering (EPS). RSM is achieved through using the experiment design method in combination with Finite Element Method and well adapted to make analytical model for a complex problem considering a lot of interaction of design variable Moreover, Sequential Quadratic Problem (SQP) method is used to solve the relsulting of constrained nonlinear optimization problem.