• Bulletin of the Korean Chemical Society
• /
• v.31 no.12
• /
• pp.3723-3729
• /
• 2010

We investigated the high-excitation voltage cathodoluminescence (CL) performance of blue light-emitting (ZnS:Ag,Al,Cl) and green light-emitting (ZnS:Cu,Al) phosphors coated with metal oxides ($SiO_2$, $Al_2O_3$, and MgO). Hydrolysis of the metal oxide precursors tetraethoxysilane, aluminum isopropoxide, and magnesium nitrate, with subsequent heat annealing at $400^{\circ}C$, produced $SiO_2$ nanoparticles, an $Al_2O_3$ thin film, and MgO scale-type film, respectively, on the surface of the phosphors. Effects of the phosphor surface coatings on CL intensities and aging behavior of the phosphors were assessed using an accelerating voltage of 12 kV. The MgO thick film coverage exhibited less reduction in initial CL intensity and was most effective in improving aging degradation. Phosphors treated with a low concentration of magnesium nitrate maintained their initial CL intensities without aging degradation for 2000 s. In contrast, the $SiO_2$ and the $Al_2O_3$ coverages were ineffective in improving aging degradation.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.5
• /
• pp.18-23
• /
• 2011

The electrokinetic transport characteristics of salts were investigated using nitrate and sulfate accumulated saline greenhouse soil. Within 8 days, 95% of nitrate was removed from the soil, while sulfate removal was 19% for 8 days. The low removal of sulfate came from adsorption reaction on the soil particles or organic matter and precipitation with calcium. Divalent cations such as calcium and magnesium were transported toward cathode via electromigration, and most monovalent cation such as potassium was removed. The pattern of residual electrical conductivity was similar with that of sulfate. Based on the results, electrokinetic technique is effective to restore nitrate-accumulated saline soil, but is not effective to restore sulfate-accumulated soil.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.268-268
• /
• 2015

The corrosion protection behavior of AZ31 magnesium alloy (Mg alloy) with cathodic electrophoretic coating (E-coating) pretreated by cerium-based conversion coatings at various pH was investigated in this study. Cerium-based conversion coatings (CeCCs) were deposited on AZ31 Mg alloy by immersion treatment in the nitrate-based cerium salt solution. The morphology and composition of the CeCCs were analyzed using scanning electron microscopy and energy dispersive X-ray spectroscopy. The corrosion properties of the AZ31 Mg alloy pretreated with cerium coating and subsequently E-coated were studied during salt-spray testing. The surface morphologies of the E-coated Mg alloy were examined in detail after different testing times using digital photography. It was found that the protective properties of the E-coating on AZ31 Mg alloy generated are heavily dependent upon the CeCC factors such as treatment time, coating thickness and pH of the solution.

• Journal of the Korean Ceramic Society
• /
• v.46 no.3
• /
• pp.242-248
• /
• 2009

Forsterite is a crystalline magnesium silicate with chemical formula $Mg_2SiO_4$, which has extremely low electrical conductivity that makes it an ideal substrate material for electronics. In this study, forsterite precursors were synthesized with magnesium silicate gels from the mixture of magnesium nitrate solution and various sodium silicate solution by the geopolymer technique. Precursors and heattreated powders were characterized by thermogravimetrical differential thermal analyzer(TG-DTA), X-ray diffractometer(XRD), scanning electron microscopy(SEM), Si magic angle spinning nuclear magnetic resonance(MAS-NMR), transmission electron microscopy(TEM). As the result of analysis about the crystallization behavior by DTA, the synthesized precursors were crystallized in the temperature range of $700^{\circ}C$ to $900^{\circ}C$. The XRD results showed that the gel composition began to crystallize at various temperature. Also, it was found that the sodium orthosilicate based precursors(named as 'FO') began to crystallize at above $550^{\circ}C$. The FO peaks were much stronger than sodium silicate solution based precursors(named as 'FW'), sodium metasilicate based precursors(named as 'FM') at $800^{\circ}C$. TEM investigation revealed that the 100nm particle sized sample was obtained from FO by heating up to $800^{\circ}C$.

• Journal of the Korea Concrete Institute
• /
• v.29 no.4
• /
• pp.415-424
• /
• 2017

The purpose of this study is to investigate the effect of sulfate (${SO_4}^{2-}$) and magnesium ($Mg^{2+}$) ions on sulfate resistance of Alkali-activated materials using Fly ash and Ground granulated blast furnace slag (GGBFS). In this research, 30%, 50% and 100% of GGBFS was replaced by sodium silicate modules ($Ms(SiO_2/Na_2O)$, molar ratio, 1.0, 1.5 and 2.0). In order to investigate the effects of $Mg^{2+}$ and ${SO_4}^{2-}$, compression strength, weight change, lengh expansion of the samples were measured in 10% sodium sulfate ($Na_2SO_4$), 10%, 5% and 2.5% magnesium sulfate ($MgSO_4$), 10% magnesium nitrate ($Mg(NO_3)_2$), 10% [magnesium chloride ($MgCl_2$) + sodium sulfate ($Na_2SO_4$)] and 10% [magnesium nitrate $(Mg(NO_3)_2$ + sodium sulfate ($Na_2SO_4$)] solution, respectively and X-ray diffraction analysis was conducted after each experiment. As a result, when $Mg^{2+}$ and ${SO_4}^{2-}$ coexist, degradation of compressive strength and expansion of the sample were caused by sulfate erosion. It was found that the reaction of $Mg^{2+}$ with Calcium Silicate Hydrate (C-S-H) occurred and $Ca^{2+}$ was produced. Then the Gypsum ($CaSO_4{\cdot}2H_2O$) was formed due to reaction between $Ca^{2+}$ and ${SO_4}^{2-}$, and also Magnesium hydroxide ($Mg(OH)_2$, Brucite) was produced by the reaction between $Mg^{2+}$ and $OH^-$.

• Journal of environmental and Sanitary engineering
• /
• v.8 no.1
• /
• pp.67-80
• /
• 1993

This survey was carried out to take the status of seawater intrusion into groundwater wells located in the eastern area of Chejudo, to get the elementary data which may evaluate the level of would-be groundwater contamination, and to perform effective the effort that will supply the clear water for the residents. The sampling sites were northeastern districts of Haengwon, Handong, and Sangdo, southeastern districts of Susan, Nansan, and Samdal, and northwestern districts, as reference, of Aewol, Keumnung, Panpo, Kosan, Shindo, and Bosung. We collected the samples from the public tap water by month, and analysed electrical conductivity, sodium(Na), potassium(K), magnesium(Mg), calcium(Ca), bicarbonate($HC0_{3^-}$), and items of the criteria as drinking water. In the northeastern districts we also added the sampling sites to survey the fluctuations of dissolved solids according to distance from seashore, including two private boreholes and one public tap water of Dukchun. The result is as follows 1) In the northeastern district, the concentration of chloride ion showed large fluctations from 40mg/l to 100mg/l, but suitable for the criteria of drinking water. It was thought that the drought influenced. 2) In the Sangdo of the northeastern districts, similar tendancy to Hangwon and Handong was showed only in the concentration of chloride ion, but different tendancy was showed in chloride-bicarbonate ratio, calcium-magnesium ratio, and sodium adsorption ratio(SAR). Considering these facts, it was not thought that seawater intruded. 3) The components of Na and Cl showed rapid slope in the northeastern districts above 3km from seashore. 4) In the northwestern districts as reference, the concentration of chloride ion fluctuated slightly according to the sampling sites and dates, and the concentration of nitrate-nitrogen in some sites exceeded the criteria of drinking water. These were thought that the surface contaminants rather than the intrusion of seawater influenced mainly the groundwater, considering the correlation(r=0.732) of chloride ion and nitrate-nitrogen. 5) Then we must consider the regional characteristies of soil profile in order to prevent the contamination of groundwater, and moniter also the movement of main components within the sol1 profile, not only the research of the intrusion of seawater.

• Analytical Science and Technology
• /
• v.12 no.2
• /
• pp.130-135
• /
• 1999

A graphite furnace atomic absorption spectrometry (GFAAS) with matrix modification has been used to determine trace amounts of arsenic, lead and selenium in rice flour samples. A mixed solution of palladium and magnesium nitrate was used as a matrix modifier to convert the analyte elements into a phase of higher thermostability and to increase the volatility of concomitants in graphite furnace. Matrix modification effects by the mixed solution were investigated for several elements (As, Cd, Cu, Pb, Se, Zn). It has been found that the matrix modifier substantially increase the pyrolysis and atomization temperature, and absorbance for As, Pb and Se. The concentration of As, Pb and Se in rice flour samples were determined by standard addition method with Zeeman background correction after microwave acid digestion. In this method the characteristic concentrations of As, Pb and Se are 26 ng/g, 18 ng/g, 24 ng/g on the basis of dry sample respectively.

• Asian Journal of Turfgrass Science
• /
• v.11 no.2
• /
• pp.89-95
• /
• 1997

Soil chemical properties were investigated to elucidate vertical movement of mineral nutrients in a fairway slope of 27 year-old golf course. Soil samples were taken at every 10cm depth to 4Ocm on 4 sites 20m apart each along two parallel lines 60m apart on the slope(15˚) in August. Accord-ing to the similarity of vertical distribution pattern they could be classified into 6 distinctive groups(magnesium, nitrate, phosphorus, ammonium, manganese and copper) and the slope tended to affect the vertical movement of minerals. The contents of Ca and Mg increased with depth while NO$_3$-N and Zn decreased and correlated positively. Soil pH showed significant positive correlation with depth, Ca and Mg. Phosphorus content was highest in 10~20cm depth and decreased resulting in relatively high content in 30~40cm depth of the bottom site of slope. Iron distribution pattern was similar to phosphorus. Potassium and $NH_4$showed various(irregular) patterns. Mn was highest in the deep layer at the lower sites of slope but it was reverse at the upper sites and negatively correlated with Fe. Cu content incresed with depth and heighest in 20~30cm depth. Electroconductivity showed significant positive correlation with $NO_3$-N. Magnesium, cal-cium and copper seem to be prone to defficiency due to fast leaching, and nitrate and phosphorus prone to excess problem. Preventive measures on acidification of surface soil should be taken.

• Korean Journal of Medicinal Crop Science
• /
• v.19 no.4
• /
• pp.227-232
• /
• 2011

The roots of Platycodon grandiflorum has been widely used as a crude drug or a food stuff. Unfortunately, the output and the quality is not regular and highly dependent on the cultivation area and cultivation method. Therefore, seedling cultivation study of this plant under structure with various fertilizer supply was performed. As a result, significant big difference between ammonia nitrogen and nitrate nitrogen content was shown in the root at seedling stage while the difference was not significant in the aerial parts. Fresh weight of the root (7.73 g plant$^{-1}$) was higher in the group treated with three major nutrients (N, P and K) than in those treated with three major nutrients and calcium or magnesium or both calcium and magnesium, and non-treated group (2.69 g plant$^{-1}$). Total nitrogen content was recognized to be significantly correlated with root weight, plant height, number of leaves and weight of aerial parts. Ammonium nitrogen content was more correlated the growth of P. grandiflorum than nitrate nitrogen. For phosphoric acid, significant correlation was also shown with the four growth factors.

• The Korean Journal of Mycology
• /
• v.23 no.1 s.72
• /
• pp.53-60
• /
• 1995

Nutritional requirements for the growth of Flammulina velutipes were studied. Mannitol, glutamic acid and ammonium nitrate were chosen for the maximum mycelial growth when various carbon and nitrogen sources tested. Optimum C : N ratio for the mycelial growth was 20 : 1. Potassium dihydrogen phosphate was selected among the phosphate sources. Magnesium sulphate and thiamine HCl stimulate mycelial growth. Final compositions of optimized chemically defined medium were 1.5% mannitol, 0.082% $NH_4NO_3$, 0.312% glutamic acid, 0.25% $KH_2PO_4$, 0.06% $MgSO_4{\cdot}7H_2O\;and\;0.3\;{\mu}g/l$ thiamin HCl. This medium not only support mycelial growth but also induce fruit body formation.