• Fashion & Textile Research Journal
• /
• v.24 no.1
• /
• pp.53-65
• /
• 2022

The fashion industry is facing numerous sustainability-related challenges due to growing consciousness about the egregious extent of global environmental problems. This study examines research trends on sustainable fashion based on five macro trends related to sustainable innovation in the fashion industry. Using the content analysis and network analysis methods, 115 research papers published in domestic and international journals from 2017 to 2021 were collected and analyzed. The study conclusions are as follows. First, majority of domestic papers(55.41%) focused on circular economy, whereas other topics such as consumer awareness(1.35%) and corporate social responsibility(2.70%), are yet to be thoroughly examined; majority of international papers(53.65%) focused on sharing economy and collaborative consumption, whereas other topics such as technological innovation(2.44%), are yet to be thoroughly examined. Second, domestic papers have found that many brands(68.57%) are applying the concept of circular economy, whereas international papers have found that many brands(51.56%) are applying the concept of sharing economy and collaborative consumption. The study results provide useful data for corporate management in the fashion industry.

• Journal of Fashion Business
• /
• v.26 no.1
• /
• pp.16-29
• /
• 2022

Environmental problems increasingly serious, and sustainability in the fashion industry has become an essential factor. Nowadays, numerous brands are engaging in sustainable fashion activities, such as recycling, vegan, fair trade, etc., which have not been done before. However, there are limited studies about sustainable fashion activities focusing on luxury brands. The purpose of this study is to establish the current status of luxury brands' sustainable fashion activities based on the macro trend of Todeschini et al(2017)'s thesis. This study selected six global luxury fashion brands Louis Vuitton, Hermes, Gucci, Prada, Burberry, and Stella McCartney. Data were collected from the brand's websites and reports, fashion magazines, and Google. As a result of the study, the following adjustments are being implemented; first, efforts are being made to reduce the consumption of natural resources. Second, transparency on working conditions is provided in various ways. Third, luxury brands' awareness of the sharing economy was not opened. Fourth, efforts are being made to develop eco-friendly materials and technologies to minimize wastage. Based on these research results, if applied as basic data for the development of Korean fashion brands and start-up companies, it will help establish directions of sustainable fashion strategies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.9
• /
• pp.861-869
• /
• 2014

This paper shows the research of a platform architecture relates to the LTE-based macro basestation; the proposed platform architecture is designed with the interface between the baseband signal and IF (Intermediate Frequency) per codeword. Using this method, we can smoothly transmit/receive a large amounts of data regardless of the number of antenna in a macro base station which is used technology such as massive MIMO. In this paper, We analyzed the evolution of LTE technology and the trend in the development of the LTE-based system. For validation of the proposed architecture, we compare the general architecture of a conventional with the proposed architecture. From the calculation results of transmission quantity data, we see that the proposed architecture can give better performance than the existing architecture. By presenting this architecture, we hope to provide a new foundation for Design and Implementation of a LTE base station platform which is used technology such as massive MIMO, carrier aggregation (CA), coordinated multi point (CoMP).

• Asian Journal of Innovation and Policy
• /
• v.2 no.2
• /
• pp.194-211
• /
• 2013

This paper introduces the Korea Citation Index (KCI) and also some macro statistics of KCI. KCI started service since 2008 by the National Research Foundation of Korea (NRF), but the data has been gathered from 1998. Our findings are as follows: heavy reliance on books in humanities, but papers as the main reference in all other disciplines. Impact factor is an increasing trend in all disciplines. Social science has the highest impact factor among all fields. In some fields even in science and engineering areas, there are more KCI papers than Korean JCR papers and impact factors of the KCI are higher than JCR. As for the distinction between nationally and internationally fields or journals, some disciplines in social science are clearly nationally oriented. NSE journals listed in both KCI and JCR, however, are not clear in terms of impact factor, but clear in terms of the numbers of papers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.228-234
• /
• 2021

Real estate market participants need to have a sense of predicting real estate prices in decision-making. Commonly used methodologies, such as regression analysis, ARIMA, and VAR, have limitations in predicting the value of an asset, which fluctuates due to unknown variables. Therefore, to mitigate the limitations, an artificial neural was is used to predict the price trend of apartments in Seoul, the hottest real estate market in South Korea. For artificial neural network learning, the learning model is designed with 12 variables, which are divided into macro and micro factors. The study was conducted in three ways: (Ed note: What is the difference between case 1 and 2? Is case 1 micro factors?)CASE1 with macro factors, CASE2 with macro factors, and CASE3 with the combination of both factors. As a result, CASE1 and CASE2 show 87.5% predictive accuracy during the two-year experiment, and CASE3 shows 95.8%. This study defines various factors affecting apartment prices in macro and microscopic terms. The study also proposes an artificial network technique in predicting the price trend of apartments and analyzes its effectiveness. Therefore, it is expected that the recently developed learning technique can be applied to the real estate industry, enabling more efficient decision-making by market participants.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.6
• /
• pp.278-282
• /
• 2007

In the complex insulation system that is used in extra high voltage(EHV) devices, according to the trend for electric power equipment of high capacity and reduction of its size, macro interfaces between two different bulk materials which affect the stability of insulation system exist inevitably. In this paper, the dielectric strength decrease of the macro interfaces between epoxy and ethylene propylene diene terpolymer(EPDM) was estimated by using the applied voltage to breakdown time characteristics. Firstly, the AC short time dielectric strength of specimens was measured at room temperature. Then, the breakdown time was measured under the applied constant voltage which is 70% of short time breakdown voltage. With these processes, the life exponent n was determined by inverse power law, and the long time breakdown voltage can be evaluated. The best condition of the interface was LOS(low viscosity(350 cSt) silicone oil spread specimen). When 30 years last on the specimens, the breakdown voltage was estimated 44% of the short time breakdown voltage.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.05a
• /
• pp.159-159
• /
• 1999

Application of the macro layer dryout model has been performed to predict CHF at inclined plates. For the identification of the detachment frequency of coalesced bubble, experiments have been performed with high-speed motion analyzer and bubble behaviors at inclined plates have been investigated. Based on the observed bubble behaviors, the detachment frequency of the coalesced bubble is measured and linear relations between detachment frequency and heat flux have been developed. In the case of 60$^{\circ}$ and 90$^{\circ}$ inclined plate, the detachment frequency decreases with the increase of heat flux. However, opposite trend has been identified in $30^{\circ}$ in-clined plate: the detachment frequency increases with the increase of heat flux. Using the cor- relation of macro layer thickness suggested by Haramura & Katto and the extrapolation of the identified linear relations, CHFs at different conditions have been predicted. According to the prediction results, CHF values are well predictable.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.8
• /
• pp.681-693
• /
• 2020

This study sees a critical gap in the previous body of research, which it seeks to fill; the disclosure of the unemployment ratio correlation has only been measured by the level of economic growth. This study is to add investment variables and government expenditure variables that objectively aim to measure the level of effectiveness in handling the unemployment ratio, which is then a measurement of the effectiveness of unemployment. Economic growth is measured by its impact on income inequality through empirical, conceptual relationships as a critical review and economic strategy for the future. The research uses secondary data on Indonesian macro and microeconomics since 2003-2018, then testing uses a quantitative approach to correlation, regression, and scatterplot. The results of this study show correlations between variables, and volatiles on the graphs show a similar trend. In other words, variables are bound together and support each other. The strategy of prioritizing the scale of government expenditure and investment to reach the target is the primary concern, so that the economic cycle can be optimal and equipped to face the possibility of an economic recession in the future. Many factors cause complex income inequality, though investment does not show a correlation to income inequality.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.4
• /
• pp.498-503
• /
• 2010

The main purpose of this study strongly concerned micro machining error estimation by using FEM analysis of tool deflection shapes in micro flat end-milling process. For the precision micro flat end-milling process, analysis of micro cutting errors is mandatory. In general, tool deflection is a major factor which causes cutting error and limits realization of the high-precision cutting process. Especially, in micro end-milling process, micro tool deflection generates very serious problems in contrast to macro tool deflection. Methods which deal with compensation of cutting error by tool deflection in macro end-milling process have been studied plentifully but, few researches transact with micro scaled cutting tool deflection in micro cutting process. Therefore, the trend of micro tool deflection was estimated by using FEM analysis in this paper. Cutting forces were acquired by micro dynamometer and these were utilized in FEM analysis. In order to verify FEM analysis results, micro machining processes were carried out and real machined profiles were compared with FEM results. Finally through the proposed approach well suited FEM results were obtained.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.1 s.119
• /
• pp.1-7
• /
• 2007

Internal fibrillation of pulp fiber is an important factor affecting paper properties. Internal fibrillation of pulp fiber is usually introduced with several kinds of modifications of fiber by the mechanical treatment such as refining, high shear and/or high consistency mixing, etc. Unfortunately there are no standardized methods that can characterize the extent of internal fibrillation and its contribution on the paper properties. The purpose of this study is to try and find the potential methods that can characterize the internal fibrillation of pulp fiber quantitatively. Softwood bleached kraft pulp was treated with Hobart mixer to introduce the internal fibrillation without the significant fiber damage and external fibrillation. The extent of internal fibrillation was increased with the increase of mechanical treatment consistency. Several fiber properties were measured to find the potential means that could characterize and quantity the internal fibrillation. Laminated area could not be used as a means for quantifying the internal fibrillation because of the effect of swelling and the different internal fibrillation behavior at different mechanical treatment consistency. Micro and macro internal fibrillation models were proposed for describing the different behavior for the mechanical treatment at low and high consistencies of pulp. The Internal fibrillation showed good correlation with swelling of fiber wall. This trend was confirmed through the measurement of wall thickness and/or cross section area of fiber. Therefore the internal fibrillation possibly can be described as the indices indicating the change of wall thickness and/or cross section area.