• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.2
• /
• pp.102-111
• /
• 1997

This paper deals with the machinability based on turning of WC-Co allows with the coated and the sintered diamond tools. The main conclusions obtained are as follows. (1) When machining WC-10%Co alloy, the flank wear of sintered diamond tool increases more largely with the increase of cutting speed in comparison with coated diamond tool. The tool wear decreases with the increase of the grain size and nose radius of sintered diamond tool. (2) When machining WC-20%Co alloy, the tool wear and cutting force decrease with the decrease of rake angle. Their exists a certain cutting speed range to exhibit the smallest tool wear in machining the WC-20%Co alloy, and this critical cutting speed becomes higher by 2 times in the case of coated diamond tool compared with sintered diamond tool. (3) The machinability becomes better with the increase of Co content. The effects of cutting speed and feed rate on the roughness of machined surface become smaller with the increase of Co content.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.3
• /
• pp.122-129
• /
• 1997

Machining technology has emerged to the point of performing atomic-scale fabrication. In tail paper atomic-scale machining characteristics are investigated by using Molecular Statics simulation method. The cutting model used in this work simulates machining with tools such as an AFM. It is shown that built-up edge formation and cutting forces depend on tool tip geometry. Also, the material flow during cutting is shown for various cutting conditions such as depth of cut, rake angle, and edge radius of tool.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.67-70
• /
• 2001

The tool geometry parameters and cutting process have complex relationships. Until now, numerous cutting tests were needed to acquire optimal design of end mill for the purpose of high speed machining, due to the insufficient knowledge about cutting process in high speed machining. Using various tools with different geometry, relationships between tool geometry parameter(rake angle, clearance angle, length of cutter) and cutting process(cutting force, surface accuracy, surface roughness) have been studied. Acquired data can be used to design optimal tool for high speed machining

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.4
• /
• pp.77-84
• /
• 2003

The properties of a machine tool greatly affect machining quality since a machine tool has large variance in its features. Machine tool makers want to find best machining condition with the one that they have built. Machine builders need to develop test specimen since it helps finding characteristics of machine tools when the machining properties of the specimen are analyzed. This paper develops test specimen to identify features of the main spindle, the feeding device, and the frame of a machine tool. The specimen is machined with a high speed machine and the features of the machine are analyzed with test items. They are surface roughness, overshoot in axial movement, errors in circular movement, feeding with small movement and compensational error. This work can improve usability for a machine tool in machining practice.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.610-614
• /
• 1996

In machining muliple components fixed on the same pallet of a NC machine, it is very important to minimize the total time required to finish the machining by carefully determining the component layout on the pallet, and the tool path of NC machine, and the sequence of tools to be used. In this paper, a linear integer programming model is presented to obtain an efficient layout; and a two-phased heuristic algorithm is proposed to minimize the total time for machining multiple components. Numerical examples are given for the case of identical components and nonidentical components, respectively. The result of either case shows significant reduction of 7.2~15.0% in the total time required to finish the machining.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.19-22
• /
• 1997

The objective of this research is to use an analytical and experimental approach to develop optimal tool geometry for high speed machining. The tool geometry parameters and cutting process have complex relationships. Until now, numerous cutting tests were needed to acquire optimal design of endmill for the purpose of high speed machining, dut to the insufficient knowledge about process in high speed machining. In order to improve the cutting ability of endmill, a model for optimal cutter shape was developed to minimize resultant cutting force by combing cutting force and wear test and surface roughness test from optimized and conventional cutter with the same cutting condition. Using various tools with different geometry, relationships between the tool geometry parameter, rake angle, clearance angle, lengh of cutter have been stuied.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.3
• /
• pp.315-322
• /
• 2011

High-accuracy micropatterns such as V-shaped microgrooves are increasingly in demand for various engineering areas. And the technical trend goes for large surface areas in precision machining technology. So micropatterns with large surface areas are expected to play an increasingly important role in today's manufacturing technology In this study, we focused on developing machining technologies. First, a machine vision system for precise tool setting is developed. Second, an on-machine measurement (OMM) system for large-area measurement is implemented. And also software for tool path generation and simulation is developed. With these technologies we fabricated large-surface micropatterns in an electroless nickel-plated workpiece with single-crystal diamond tools and a 32-in, $675mm{\times}450mm$ mold with tens of V-and pyramid-shaped micropatterns.

• Journal of Mechanical Science and Technology
• /
• v.17 no.5
• /
• pp.691-697
• /
• 2003

Extensive researches have been carried out on machine tool chatter to obtain assessment procedure and improvement measures. In this study, chatter limit is predicted on a newly fabricated universal machining center by the combination of structural dynamic characteristics and cutting mechanics. We showed the unstable cutting conditions, and from them we could plot the unstable borderlines. From the chatter simulations we could say that the newly built universal machining center can be well used in the finishing machining of steel as other common machine tools.

• Journal of the Korea Society for Simulation
• /
• v.8 no.1
• /
• pp.19-33
• /
• 1999

The fundamental issues to evaluate machine tools performance through simulation pertain to the physical models of the machine tool itself and of process while the practical problems are related to the development of the modular software structure. It allows the composition of arbitrary machine/process models along with the development of programs to evaluate each state of machining process. Surface roughness is one of the fundamental factors to evaluate machining process and performance of machine tool, but it is not easy to evaluate surface roughness due to its tribological complexity. This paper presents an algorithm to calculate surface roughness considering cutting geometry, cutting parameters, and contact dynamics of cutting between tool and workpiece as well as tool wear in turning process. This proposed algorithm could be used in the designed virtual machining system. The system can be used to evaluate the surface integrity of a turned surface during the design and process planning phase for the design for manufacturability analysis of the concurrent engineering.

• IE interfaces
• /
• v.12 no.1
• /
• pp.49-55
• /
• 1999

There are many types of holes to be machined on dies manufactured in the car industry. In this paper we introduce a CAM software developed for hole machining of press dies. The CAM software automatically generates NC files for machining holes from CAD data modeled in the CATIA system. A procedure generating NC files consists of three steps. First, the geometric information such as types of holes, hole positions, hole diameters, and hole depths is extracted from CATIA models. And then tools to be used and operation orders are standardized to establish a data base. Finally, NC files are generated by considering the machining conditions such as feedrate and rpm. It is efficient that holes with the same type and the same size should be grouped and machined by a tool to reduce the tool change time. The optimal tool path for machining the holes in a group can be determined by applying an algorithm solving the traveling salesman problem.