• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.435-440
• /
• 2005

This study describes a new method of constructing Reconfigurable machine tools configurations from a set of modules or components. This proposed method defines combinability vector for each module and mutual combinability coefficient matrix for adjacent two modules. All of machine configurations possible to be generated from any two adjacent modules can be determined by quadratic form of two associated combinability vectors. Furthermore, all of possible RMT configurations generating from a series of multiple modules also can be obtained by multiplying quadratic form of two adjacent conbinability vectors recursively. Our proposed RMT configuration generating method can be successfully applied to determining all of possible machine configurations from several modules or components at conceptual- or preliminary- design stage.

• 한국공작기계학회논문집
• /
• 제18권1호
• /
• pp.103-109
• /
• 2009

This paper presents structural design optimization of a micro milling machine for minimum weight and compliance using a genetic algorithm with dynamic penalty function. The optimization procedure consists of two design stages, which are the static and dynamic design optimization stages. The design problem, in this study, is to find out thickness of structural members which minimize the weight, the static compliance and the dynamic compliance of the micro milling machine under several constraints such as dimensional constraints, maximum compliance limit, and safety factor criterion. Optimization results showed a great reduction in the static and dynamic compliances at the spindle nose of the micro milling machine in spite of a little decrease in the machine weight.

• 대한안전경영과학회지
• /
• 제9권5호
• /
• pp.79-85
• /
• 2007

Intelligent machines respond to external environments on the basis of decisions that are made by sensing the changes in the environment and analyzing the obtained information. This study focuses on the construction of a knowledge base which enables decision making with that information. Approximately 70% of all errors that occur in machine tools are caused by thermal error. In order to proactive deal with these errors, a system which measures the temperature of each part and predicts and compensates the displacement of each axis has been developed. The system was built in an open type controller to enable machine tools to measure temperature changes and compensate the displacement. The construction of a machining knowledge base is important for the implementation of intelligent machine tools, and is expected to be applicable to the network based intelligent machine tools which look set to appear sooner or later.

• 한국컴퓨터정보학회논문지
• /
• 제22권6호
• /
• pp.1-8
• /
• 2017

In this paper, we propose a fault tolerance technique which enables embedded systems to run without interruption while its operating system and tasks fail. In order to improve reliability, the proposed scheme makes an embedded system run as a virtual machine on virtual machine monitor. It also prepares a contingency virtual machine at which periodical backups of the embedded system are saved. When an error occurs in the main virtual machine, the corresponding standby virtual machine takes a role of the main virtual machine and continues its operation. Especially such backups and switches of virtual machines are performed with minor performance degradation by manipulating page table entries in virtual machine monitor. By conducting performance evaluation studies, we show that the proposed scheme makes embedded system robust against errors while it does not degrade the performance of the system significantly.

• 산업경영시스템학회지
• /
• 제25권2호
• /
• pp.35-41
• /
• 2002

This paper describes an automatic transplantation machine of optical fiber controlled by PLC. The transplantation operations is a key operation for the optical fiber application products, such as bag, cap, and others. To transplant 200∼500 optical fibers, there are many recurrent manual operation needed with conventional process. In this paper. we propose an automatic machine that reduce transplanting time and enhance product quality. Developed machine includes transplantation, heat cutting and ultraviolet coating operation. Also proposed Machine is controlled by PLC to adjust operation parameters such as pulling length, cycle time, coating time and others. Developed Machine has been applied in the field and found to be a useful system.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.1901-1907
• /
• 2018

This paper is a study for accurate iron loss calculation of a cylindrical linear machine for free piston engine. This study presents that it is possible to accurately predict power loss in ferromagnetic laminations under magnetic flux by specially considering the dependence of hysteresis, classical, and excess loss components on the magnetic induction derivative. Significant iron loss in the armature core will not only compromise the machine efficiency, but may also result in excessive heating, which could lead to irreversible deterioration in the machine performance. Thus, correct prediction of power losses under a distorted flux waveform is therefore an important prerequisite to machine design, particularly when dealing with large apparatus where stringent efficiency standards are required. Finally, it will be discussed about the iron loss in various materials of cylindrical linear electric machine by geometric and electrical parameters. It will give elaborate information about the perfect design and design rules of cylindrical linear machine and in parallel tools for the calculation, simulation and design will be available.

• Industrial Engineering and Management Systems
• /
• 제11권1호
• /
• pp.114-122
• /
• 2012

This paper considers a non-identical parallel machine scheduling problem with sequence and machine dependent setup times. The objective of this problem is to determine the allocation of jobs and the scheduling of each machine to minimize makespan. A mathematical model for optimal solution is derived. An in-depth analysis of the model shows that it is very complicated and difficult to obtain optimal solutions as the problem size becomes large. Therefore, two meta-heuristics, genetic algorithm (GA) and a new population-based evolutionary meta-heuristic called self-evolution algorithm (SEA), are proposed. The performances of the meta-heuristic algorithms are evaluated through compare with optimal solutions using randomly generated several examples.

• 정보과학회 논문지
• /
• 제43권7호
• /
• pp.751-762
• /
• 2016

본고에서는 양자역학 기반의 기계학습인 양자 기계학습의 현황과 전망을 조망하고자 한다. 양자역학 기반의 양자컴퓨팅이 보여준 혁신적인 계산속도 개선에 힘입어 기계학습 분야에 양자컴퓨팅 알고리즘을 적용하는 연구는 빅데이터 시대의 도래에 따라 최근 집중적인 관심을 받고 있다. 고전적인 기계학습 알고리즘들에 양자컴퓨팅을 접목하여 획기적인 속도개선을 가능하게 하는 알고리즘 연구들과 최초의 상용 양자컴퓨터로 화제가 되고 있는 양자 담금질 알고리즘 등을 중심으로 양자 기계학습의 최신동향과 가능성을 살펴보고자 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.950-953
• /
• 2005

This study presents development of a multi-way high speed pipe cutting machine to improve production rate of pipe cut pans. In this paper, structural and modal analysis for the developed machine is carried out to check safety of the machine design. The analysis is carried out by FEM simulation using the commercial software, CATIA V5. The machine is modeled by placing proper shell and solid finite elements. The final results of analysis are applied to the design of multi-way high speed pipe cutting machine and the machine is successfully developed.

• 한국정밀공학회지
• /
• 제16권9호
• /
• pp.75-81
• /
• 1999

In order to remain competitive, a manufacturing company needs to maintain the optimal condition of its manufacturing system. Machine tools as an important element of a manufacturing system consist of complex mechanical as well as electronic components. Therefore, diagnosing the troubles of machine tools is a tricky process which requires a lot of experience and knowledge. Since providing machine tool users with necessary services at the right time is very difficult and expensive, a remote diagnosis system is to be regarded as a good alternative, with which users can diagnose and fix the machine troubles. This paper presents a framework for a remote machine tools diagnosis system by combining the world wide web technology and backward reasoning expert system.