• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.6
• /
• pp.1221-1225
• /
• 2009

The pulse diagnosis is an important and universally used method in Oriental Medicine. Since the traditional method of palpating the pulse relies on the subjective sense in the fingers of an Oriental Medical Doctor(OMD), there has been continued need for more objective method for pulse diagnosis. Recently, various pulse analyzers have been developed to meet such objective palpation and interpretation. However, most of these attempts were not successful to replace OMD's own palpation by fingers. To improve the performance of the pulse analyzers, one should develop machine-appropriate interpretations for the pulse images in the literature, in addition to the improvement in the repeatability and reproducibility. One of such widely-used pulse images to be interpreted is the floating and sinking pulse. The floating and sinking pulses are the two representative pulse images informing us how strong pressure one should apply to obtain the maximal pulse strength. A previous study suggested a convenient and unified measure for the floating and sinking pulses by defining the coefficient of the floating-sinking pulse(CFS). We found the original definition of the CFS could be erroneous under some situations. To improve the performance, we introduce new CFS algorithm for determining the floating and sinking pulse with a pulse analyzers(3-D MAC). To test the performance of the newly suggested algorithm, we conducted a clinical study comparing the agreement ratio with the floating and sinking pulse diagnosis by the OMDs. We found that, among the subjects who are diagnosed with having either the floating pulse or sinking pulse, the new CFS algorithm showed 55.3% diagnosis rate and 73.0% concordance rate, which are about 3% and 6% improvement in the diagnosis rate and agreement rate, respectively, compared to the original CFS algorithm.

• Journal of Life Science
• /
• v.15 no.4 s.71
• /
• pp.553-560
• /
• 2005

The stf (Salmonella typhimurium fimbriae) operon consisting of stfA(CDEFG assumes to encode putative fimbriae. The complete stf operon is existed in S. typhimurium and S. choleraesuis, whereas it is absent in S. typhi. Analyses of the amino acid residues between major subunit StfA of the Stf fimbriae and those of known other fimbriaes suggested that Stf belongs to class I type fimbriae. Through comparison of StfD chaperone with the other fimbrial chaperones, and of C-terminus in subunits of Stf fimbriae, it belongs to FGS (with a short Fl-G1 loop) subfamily. In order to investigate the expression of stf operon, we have constructed a Salmonella strain containing a chromosomal stfA::lacZYA transcriptional fusion, resulting in S. typhimurium $_X8532$. The strain $_X8532$ lacked the expression of \beta-galactosidase$ under normal culture conditions. However, with longer incubation time of the S. typhimurium $_X8532$, we have isolated 21 individual strains exhibiting $Lac^+$ phenotype. $Lac^+$ phenotype was appeared as approximately 0.03 frequency per generation. All isolates expressed lacZ constitutively in the various environmental conditions. Various global regulatory proteins including RpoS, OmpR, and CpxR were not involved in the regulation of the stf operon. A S. typhimurium $_X8661$ mutant lacking stfAC function attenuated 6.7 folds more than that of wild type $_X3761$ in the mouse virulence test, suggesting in the somehow involved in the Salmonella pathogenesis.

• Korean Journal of Environmental Biology
• /
• v.31 no.4
• /
• pp.478-485
• /
• 2013

Fish field survey, especially fish distribution and their ecological characteristics, was performed in the downstream region of Gyeongan stream during the period of before (June) and after (October) the summer monsoon in 2010. Depending on the characteristics of each site, fyke net or casting net was used for fish sampling. Feeding classification was determined by the analysis of stomach contents. Total number of family and species sampled were 5 and 17, respectively. The dominant family was Cyprinidae (12 species), and relative abundance (RA) of the most dominant species, Lepomis macrochirus and Zacco platypus, was 38% and 24%, respectively. Exotic species and Korean endemic species observed were 3 (423 individuals, RA 44%) and 4 (98 individuals, RA 10%), respectively. Tolerance guild analysis as characteristics of ecological indicators revealed an undoubtedly high percentage (97%), compared to others as reflected by the identification of just one sensitive species. Analysis of trophic guilds showed that L. macrochirus dominated among insectivores (44% RA). The food of L. macrochirus composed of, aquatic insects, benthic invertebrates, zooplankton, Chironomidae, and waterweed. Thus, we determined that L. macrochirus could be classified as insectivores (partially carnivores) in this study. Conversely, Z. platypus consumed Cladocera exclusively, greater than 90% of their feed. We presume that stable isotope analysis would identify the exact position of these species in the food web.

• Journal of Broadcast Engineering
• /
• v.13 no.1
• /
• pp.6-16
• /
• 2008

An instable wireless channel condition causes more packet losses and retransmissions due to interference, fading, station mobility, and so on. Therefore video streaming service over a wireless networks is a challenging task because of the changes in the wireless channel conditions and time-constraints characteristics of the video streaming services. To provide efficient video streaming over a wireless networks, QoS-enhanced MAC protocol, IEEE 802.11e, is standardized recently. Tn this paper, we propose a new network-adaptive H.264 video streaming mechanism in the IEEE 802.11e wireless networks. To improve the quality of video streaming services, video stream has to adapt to the changes in the wireless channel conditions. The wireless channel conditions are estimated by the packet loss probability and informed to the application layer by the cross-layering. According to the wireless channel information, the video streaming application filters out the low-priority data. This adaptation mechanism efficiently uses system resources because it drops the low-priority data in advance. Therefore, our cross-layer design can provide improved video streaming services to the end-user. Through the implementation and performance evaluation, we prove that the proposed mechanism improves the QoS of the video streaming by providing the smoothed playback.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.185-191
• /
• 2015

This paper suggest the safety class communication board in order to design the safety network of the nuclear safety class controller. The reactor protection system use the digitized networks because from analog system to digital system. The communication board shall be provided to pass the required performance and test of the safety class in the digital network used in the nuclear safety class. Communication protocol is composed of physical layer(PHY), data link layer(MAC: Medium Access Control), the application layer in the OSI 7 layer only. The data link layer data package for the cyber security has changed. CRC32 were used for data quality and the using one way communication, not requests and not responses for receiving data, does not affect the nuclear safety system. It has been designed in accordance with requirements, design, verification and procedure for the approving the nuclear safety class. For hardware verification such as electromagnetic test, aging test, inspection, burn-in test, seismic test and environmental test in was performed. FPGA firmware to verify compliance with the life-cycle of IEEE 1074 was performed by the component testing and integration testing.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2003.05a
• /
• pp.10-10
• /
• 2003

일라이트-스멕타이트 혼합층광물(I-S)은 열역학적으로 상호 대립적인 두 가지 모델로 이해되고 있다. 첫째, MacEwan 결정자 모델은 I-S를 5-20개의 스멕타이트와 일라이트 층으로 구성된 결정자로 해석한다. 이러한 모델은 분산과 재응집 과정을 기초로 하는 X-선 회절분석(XRD)에서 기인한 것으로 Reynolds의 XRD 모델과 동일하다. 둘째, 기본입자 모델은 I-S를 물리적으로 분리될 수 있는 최소 입자인 기본입자가 $c^{*-}$축 방향으로 응집된 응집체로 해석한다. 이러한 모델은 분산 과정을 기초로 하는 주사전자현미경(TEM) 관찰에서 기인한 모델이다. 강일모 등(2002)은 이 두 가지 모델을 비교함으로써 1< $N_{F}$<100/% $S_{XRD}$ ( $N_{F}$=평균 기본입자 층개수, %$S_{XRD}$=XRD 분석을 통하여 측정된 팽창성)을 도출하였다. 이 식은 기본입자모델과 Eberl & Srodon(1988)이 제시한 최대 팽창성(%$S_{MAX}$)을 동시에 해석할 수 있게 해준다. %$S_{MAX}$는 XRD 모델에서는 고려하지 않는 I-S 결정자 상$\cdot$하부에 존재하는 두 개의 0.5nm 규산염층을 하나의 스멕타이트 층으로 간주하여 얻어진 팽창성이다. Srodon et al.(1992)은 %$S_{MAX}$=100/ $N_{F}$을 제시하였으며, 강일모 등(2002)은 %$S_{MAX}$는 기하학적으로 기본입자가 무한적층을 하였을 때 관찰되는 %$S_{XRD}$와 동일함을 밝힌 바 있다. 만약, XRD 분석을 위한 시료 준비과정에서 I-S 결정자가 분산되었다가 재응집을 한다면, XRD에서 관찰되는 결과는 일차적으로 기본입자의 적층성에 영향을 받게 된다. 따라서, 기본 입자의 적층성은 XRD 분석을 이용하여 I-S 구조를 해석하는데 매우 중요한 요인이다. 본 연구는 기본입자의 적층성을 정량화하기 위해 %$S_{XRD}$=A/ $N_{F}$ (0$S_{MAX}$=100/ $N_{F}$로부터 얼마나 벗어나 있는가는 지시해 준다 금성산화산암복합체에서 산출되는 11개 I-S 시료와 14개의 Drits et al.(1998) 자료로부터 1nA=-0.14 $N_{F}$+4.7의 실험식을 도출할 수 있었으며, 기본입자의 적층성은 일차적으로 기본입자의 두께에 의해 영향을 받는 것으로 관찰되었다. Nadeau(1985)는 기본입자두께분포로부터 I-S 결정자의 팽창성을 측정하기 위하여 Ps=$\Sigma$p(N)/N을 제시하였다(Ps=스멕타이트 층 비율, N=기본 입자 층개수, p(N)=N의 확율). 그러나 위식은 실질적으로 %$S_{MAX}$를 제공해주기 때문에 %$S_{XRD}$를 유추하는데는 부적합하다. 본 연구는 이를 변형하여 Ps=$\Sigma$p(N)A(N)/N을 제시하였다(A(N)=N에 대한 A값). 위의 실험식을 사용하여 헝가리산 Zempleni 시료(15%$S_{XRD}$)의 기본입자분포로부터 %$S_{XRD}$를 계산한 결과, 16%$S_{XRD}$의 결과값을 얻을 수 있었다. 따라서, 본 연구에서 도출한 관계식들이 유효함을 확인할 수 있었다.계식들이 유효함을 확인할 수 있었다.

• Journal of Animal Environmental Science
• /
• v.11 no.1
• /
• pp.11-16
• /
• 2005

The round bale wrappers are generally used for rice straw after the harvesting of low land rice by combine harvester. In this situation, the bale wrappers should be well adapted under the travelling over raised borders and temporary ditches in soft soil of narrow rice fields. The study was conducted to improve the performance of bale wrapper through the new design for compact size, lowered gravity center and lowered power consumption. The prototype of round bale wrapper had been designed and assembled to tractor with three point hitch mounted. The machine type is one roll driving system with one roll for rotating and one roll for wrapping. The driving torque and work performance of the machines were measured and analysed. The torque requirement of the prototype and conventional type was 6kgf-m and 12kgf-m, respectively. The prototype shaved less friction resistance between bale driving roll and round bale. and the power requirement can also be reduced from 12kgf-m in the conventional to 6kgf-m in the prototype. The work efficiency of the new bale wrapper was $45\%$ higher than the conventional wrapper, and the working cost of the prototype can be reduced $17\%$ than that of the conventional.

• Journal of Advanced Navigation Technology
• /
• v.17 no.5
• /
• pp.475-483
• /
• 2013

In this paper, the performances of modeling methods for combining corrections from multiple reference stations for network user were compared and analyzed. The longer the distance between reference station and user is, the more the GPS errors are decorrelated. Based on this point, multiple corrections from reference stations which is constituting a network should be combined properly to be applied for user observation to eliminate GPS errors. There are many widely used conventional modeling methods and they are applied for Compact Network RTK users and user position accuracy is predicted by using residual errors in observation of user. Compact Network RTK is a technique of generating corrections which was developed by Seoul National University. As a result, the horizontal and vertical accuracies were within about 5 cm and 7 cm respectively with 95 % probability for all conventional modeling methods. In addition, we analyzed condition for reference station constellation for modeling method using height information.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.401-412
• /
• 1998

The aim of this study was to measure the regional micro-shear bond strength of dentin bonding agents to dentin, and to investigate the relationship between the micro-shear bond strength and two dentinal characteristics ; Vickers hardness and remaining dentin thickness. Twenty-four freshly extracted, noncarious human molars were selected for this study. The materials tested in this study consisted of two commercially available dentin bonding agents (MAC-BOND, ONE-STEP) and two restorative light-cured composite resins (AELITEFIL, Z100). The occlusal or side surface of tooth crown was sectioned to expose dentin, and the exposed surface was finally polished with # 600 sandpaper. Four groups of application methods were used combining the filling materials and the dentin bonding agents. The composite resin-attached tooth specimens were embeded in a cold cure acrylic resin, and were cut with a low speed diamond saw to the dimension of 1mm $\times$ 1mm. Nine specimens were obtained from each tooth. The cut specimens were divided into three groups depending on the position of the dentin bonding surface. The micro-shear bond strength, remaining dentin thickness, and dentinal hardness were measured. Experimental results were then statistically analyzed with ANOVA. t-test, Scheffe test, and regression analysis. From this experiment, the following results were obtained : 1. In the case of occlusal surface bonding, the pooled micro-shear bond strength of ONST-AELIT group (16.62 MPa) was significantly higher than that of MACB-AELIT group (9.91 MPa) (p<0.05). However, there was no significant difference in the micro-shear bond strength depending on the dentin position (p>0.05). 2. In the case of side surface bonding of crown, the pooled micro-shear bond strength of four different bonding groups was not significantly different among each other (p>0.05). However, in three of the test groups (ONST-AELIT, MACB-Z100, ONST-Z100), the micro-shear bond strength to the lower 1/3(III) position was significantly lower than that to middle 1/3(II) position of surface (p<0.05). 3. In the ONST-AELIT bonding group, the pooled micro-shear bond strength to the occlusal surface was significantly lower than that to the side surface of crown (p<0.05). 4. There was no significant correlation between the micro-shear bond strength and dentin hardness / remaining dentin thickness (p>0.05).

• Journal of Animal Science and Technology
• /
• v.63 no.5
• /
• pp.1126-1141
• /
• 2021

Recent evidence has shown that methionine (Met) supplementation can improve milk protein synthesis under hyperthermia (which reduces milk production). To explore the mechanism by which milk protein synthesis is affected by Met supplementation under hyperthermia, mammary alveolar (MAC-T) cells were incubated at a hyperthermic temperature of 42℃ for 6 h in media with different concentrations of Met. While the control group (CON) contained a normal amino acid concentration profile (60 ㎍/mL of Met), the three treatment groups were supplemented with Met at concentrations of 10 ㎍/mL (MET70, 70 ㎍/mL of Met), 20 ㎍/mL (MET80, 80 ㎍/mL of Met), and 30 ㎍/mL (MET90,90 ㎍/mL of Met). Our results show that additional Met supplementation increases the mRNA and protein levels of BCL2 (B-cell lymphoma-2, an anti-apoptosis agent), and decreases the mRNA and protein levels of BAX (Bcl-2-associated X protein, a pro-apoptosis agent), especially at an additional supplementary concentration of 20 ㎍/mL (group Met80). Supplementation with higher concentrations of Met decreased the mRNA levels of Caspase-3 and Caspase-9, and increased protein levels of heat shock protein (HSP70). The total protein levels of the mechanistic target of rapamycin (mTOR) and the mTOR signalling pathway-related proteins, AKT, ribosomal protein S6 kinase B1 (RPS6KB1), and ribosomal protein S6 (RPS6), increased with increasing Met supplementation, and peaked at 80 ㎍/mL Met (group Met80). In addition, we also found that additional Met supplementation upregulated the gene expression of αS1-casein (CSN1S1), β-casein (CSN2), and the amino acid transporter genes SLC38A2, SLC38A3 which are known to be mTOR targets. Additional Met supplementation, however, had no effect on the gene expression of κ-casein (CSN3) and solute carrier family 34 member 2 (SLC34A2). Our results suggest that additional Met supplementation with 20 ㎍/mL may promote the synthesis of milk proteins in bovine mammary epithelial cells under hyperthermia by inhibiting apoptosis, activating the AKT-mTOR-RPS6KB1 signalling pathway, and regulating the entry of amino acids into these cells.