• Herbal Formula Science
• /
• v.11 no.2
• /
• pp.125-134
• /
• 2003

We have examined the relaxational response to the water extract of Angelica gigas $N_{AKAI}$ (AG), Gingko biloba $L_{INNE}$ (GB), Acanthopanax senticosus $H_{ARMS}.$ (AP) and Augumented-Four-Substance Decoction (AG-FSD, GB-FSD, AP-FSD) in isolated thoracic aorta from sprague dawley(SD) rat. Rat thoracic aorta was investigated in vessel segments suspended for isometric tension recording by polygraph. Responses to AG, GB, AP and AG-FSD, GB-FSD, AP-FSD were investigated in vessels precontracted with 5-hydroxytryptamine(5-HT) were compared in vasodilation effect. We found that the thoracic aorta segments responded to AG, GB, AP and AG-FSD, GB-FSD, AP-FSD with a dose-dependent vasodilation. The 5-hydroxytryptamine induced contraction at $10^{-4}M$ were inhibited by 26.3%, 75.8%, 87.5% and 6.9%, 22.6%, 30.8% after addition of the 0.1 g/mL water extract of AG, GB, AP and AG-FSD, GB-FSD, AP-FSD. In conclusion, AG, GB, AP and AG-FSD, GB-FSD, AP-FSD induced relaxation in the isolated rat thoracic aorta were composed of dose-dependent relaxation. AP-FSD has very potent vasodilation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.3
• /
• pp.9-14
• /
• 2004

In this study, Si anisotropic etching characteristics of tetramethylammonium hydroxide (TMAH)/ ammonium persulfate(AP)/isopropyl alcohol(IPA) solutions were investigated to realize the optimum structure of a diaphragm for the piezoresistive pressure sensor application. Due to its low toxicity and its high compatibility with the CMOS processing, TMAH was used as Si anisotropic etchants. The variations of Si etch rate on the etching temperature, TMAH concentration, and etching time were obtained. With increasing the etching temperature and decreasing TMAH concentrations, the Si etch rate is increased while a significant non-unifonnity exists on the etched surface because of formation of hillocks on the (100) surface. The addition of IPA to TMAH solution leads to smoother etched surfaces but, makes the Si etch rate lower. However, with the addition of AP to TMAH solution, the Si etch rate is increased and an improvement in flatness on the etching front is observed. The Si etch rate is also maximized with increasing the number of addition of AP to TMAH solution per one hour. The Si square membranes of 20${\mu}{\textrm}{m}$ thickness and l00-400${\mu}{\textrm}{m}$ one-side length were fabricated successfully by applying optimum Si etching conditions of TMAH/AP solutions.

• Journal of the Korean Society of Radiology
• /
• v.12 no.7
• /
• pp.807-812
• /
• 2018

In this study, we investigated the conditions used in setting the recommendation level of general radiography diagnostic reference and tried to evaluate the effective dose and biological evaluation using PCXMC v2.0 program. As a result based on the effective dose of male in ICRP 60, the highest Pelvis AP was 0.794 mSv. The lowest Chest PA was 0.050 mSv. In the case of ICRP 103, the highest T-Spine AP was 0.906 mSv The lowest Chest PA was 0.052 mSv. For 40 years old male and female adults, effective doses of general radiography were evaluated and even if the medical exposures are not subject to the limit of dose, efforts should be made to reduce the medical exposures of the people by keeping the dose below the recommended amount in order to minimize the probable effect of radiation hazard.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.4
• /
• pp.21-27
• /
• 2017

In this paper, in order to control the burning rate and pressure exponent of HTPB/AP/Al based propellant for the improvement of performance, the effect of the size ratio of AP particles and various contents of Butacene as burning catalyst on combustion properties was investigated. In the propellant formulation with both $28{\mu}m$ Al of 23% and Butacene of 3%, the burning rate and pressure exponent were increased with increasing the contents of $9{\mu}m$ AP particles. And the burning rate was increased with increasing the contents of Butacene with showing the relatively low pressure exponent in the propellant containing Butacene. However, the significant variations of pressure exponent by contents of Butacene were not observed.

• Journal of Broadcast Engineering
• /
• v.21 no.3
• /
• pp.298-306
• /
• 2016

With the advent of Internet of Things (IoT) technology that allows the communications between things and devices over the Internet, a lot of researches on the IoT services, such as smart home or healthcare, have been progressed. In the existing machine-to-machine (M2M) communications, however, since the underlying link-layer technologies, such as Bluetooth or ZigBee, do not use the Internet Protocol (IP) communication, those technologies are not suitable to provide the IoT services. Accordingly, this paper discusses how to provide the Internet services in the M2M communication, and propose an implementation of the Constrained Application Protocol (CoAP) over 6LoWPAN for providing IoT services in the BLE networks. Based on the implementation, we compared the performance between HTTP and CoAP for IoT communications. From the experimental results, we can see that the CoAP protocol gives better performance than the HTTP protocol with two times higher throughput, 21% faster transmission time, and 22% smaller amount of generated packets.

• Journal of Broadcast Engineering
• /
• v.27 no.3
• /
• pp.273-282
• /
• 2022

MPEG-VCM(Video Coding for Machine) aims to standardize video codec for machines. VCM provides data sets and anchors, which provide reference data for comparison, for several machine vision tasks including object detection, object segmentation, and object tracking. The evaluation template can be used to compare compression and machine vision task performance between anchor data and various proposed video codecs. However, performance comparison is carried out separately for each machine vision task, and information related to performance evaluation of multiple machine vision tasks on a single bitstream is not provided currently. In this paper, we propose a performance evaluation method of a video codec for AI-based multi-tasks. Based on bits per pixel (BPP), which is the measure of a single bitstream size, and mean average precision(mAP), which is the accuracy measure of each task, we define three criteria for multi-task performance evaluation such as arithmetic average, weighted average, and harmonic average, and to calculate the multi-tasks performance results based on the mAP values. In addition, as the dynamic range of mAP may very different from task to task, performance results for multi-tasks are calculated and evaluated based on the normalized mAP in order to prevent a problem that would be happened because of the dynamic range.

• Journal of the Semiconductor & Display Technology
• /
• v.2 no.4
• /
• pp.19-22
• /
• 2003

In this paper, Si anisotropic etching characteristics of tetramethylammonium hydroxide (TMAH)/ammonium persulfate (AP) solutions were investigated to realize the optimum structure of a diaphragm for the piezoresistive pressure sensor application. Due to its low toxicity and its high compatibility with the CMOS processing, TMAH was used as Si anisotropic etchants. The variations of Si etch rate on the etching temperature, TMAH concentration, and etching time were obtained. With increasing the etching temperature and decreasing TMAH concentrations, the Si etch rate is increased while a significant non-uniformity exists on the etched surface because of formation of hillocks on the <100> surface. With the addition of AP to TMAH solution, the Si etch rate is increased and an improvement in flatness on the etching front is observed. The Si etch rate is also maximized with increasing the number of addition of AP to TMAH solution per one hour. The Si square diaphragms of 20$\mu\textrm{m}$ thickness and 100-400 $\mu\textrm{m}$ one-side length were fabricated successfully by adding AP of (5/6)g to 800 ml TMAH solution every 10 minutes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3B
• /
• pp.260-267
• /
• 2011

Wireless Local Area Network (WLAN) is recently become popular on the internet since we can download and transfer mass data through it. However, transferring data with distances over 100m often causes some troubles. When downloading mass data from moving vehicles such as cars, jeeps, tanks, etc., if the download process from the first AP (Access Point) is not completed then we have to re-start this process from the second AP (from 0%). Therefore, the question is how to maintain the data we have received from the first AP, and then continuously download remaining data from the next APs in a battlefield environment. In this paper, we propose an effective method for receiving mass data separately from the mobile receive nodes in a Delay Tolerant Network (DTN). We carried on an experiment and evaluation by simulation; these simulation results are provided to show the proposed information delivery scheme performance.

• Electronics and Telecommunications Trends
• /
• v.28 no.6
• /
• pp.133-140
• /
• 2013

기존의 센서 접속 기술은 그 분야에 띠라 다양한 표준과 규격이 존재하였다. 빌딩 자동제어 및 제어 네트워크용으로는 BACnet이 있으며, 공장제어 및 계측제어를 위한 Modbus 등이 다양한 프로토콜이 존재한다. 최근 M2M(Machine-to-Machine) 및 IoT(Internet of Things), WoT(Web of Things) 시대로 접어 들음에 따라 센서 및 각종 디바이스 간에 상호 통신할 수 있는 공통 프로토콜이 필요하게 되었다. IoT 프로토콜로 IEIF(Internet Engineering Task Force) CoAP(Constrained Application Protocol) 프로토콜이 핵심 역할을 하고 있으며, 차세대 센서 접속 프로토콜로 IETF CoAP이 많이 사용될 것으로 예상된다. 본고에서는 IETF CoAP 표준화 동향 및 규격에 대해 살펴본다.

• Journal of Environmental Science International
• /
• v.23 no.9
• /
• pp.1643-1654
• /
• 2014

The university is one of the main energy consumption facilities and thereby releases a large amount of greenhouse gas (GHG). Accordingly, efforts for reducing energy consumption and GHG have been established in many local as well as international universities. However, it has been limited to energy consumption and GHG, and has not included air pollution (AP). Therefore, we estimated GHG and AP integrated emissions from the energy consumed by Seoul National University of Science and Technology during the years between 2010 and 2012. In addition, the effect of alternative energy use scenario was analysed. We estimated GHG using IPCC guideline and Guidelines for Local Government Greenhouse Inventories, and AP using APEMEP/EEA Emission Inventory Guidebook 2013 and Air Pollutants Calculation Manual. The estimated annual average GHG emission was $11,420tonCO_{2eq}$, of which 27% was direct emissions from fuel combustion sectors, including stationary and mobile source, and the remaining 73% was indirect emissions from purchased electricity and purchased water supply. The estimated annual average AP emission was 7,757 kgAP, of which the total amount was from direct emissions only. The annual GHG emissions from city gas and purchased electricity usage per unit area ($m^2$) of the university buildings were estimated as $15.4kgCO_{2eq}/m^2$ and $42.4tonCO_{2eq}/m^2$ and those per person enrolled in the university were $210kgCO_{2eq}$/capita and $577kgCO_{2eq}$/capita. Alternative energy use scenarios revealed that the use of all alternative energy sources including solar energy, electric car and rain water reuse applicable to the university could reduce as much as 9.4% of the annual GHG and 34% of AP integrated emissions, saving approximately 400 million won per year, corresponding to 14% of the university energy budget.