• Title/Summary/Keyword: m-term

Search Result 2,745, Processing Time 0.035 seconds

Review on the divergence form for bed slope source term and correction of the volume/free-surface relationship (발산형 바닥 경사 생성항의 재검토와 체적-수위 관계의 수정)

  • Hwang, Seung-Yong
    • Journal of Korea Water Resources Association
    • /
    • v.50 no.5
    • /
    • pp.289-302
    • /
    • 2017
  • DFB (Divergence Form for Bed slope source term) was rigorously derived and the error of mDFB using mean water depth at the cell face in DFB was clearly demonstrated. In addition, DFB technique turned out to be an exact method to the bed slope source term. The existing volume/free-surface relationship to the PSC (Partially Submerged Cell) has been corrected. It was discussed that treatment for the partially submerged edge is required to satisfy the C-property in PSC. It is expected that this study will provides a more accurate means in analyzing the shallow water equations with the approximate Riemann solver.

A Study on the Evaluation of Long Term Stability of Brinell Standard Hardness Tester and Automatic Indentation Measurement System and Optimum Test Condition (브리넬 경도 표준 시험기 및 압입자국 자동 측정 장치의 장기 안정도 평가와 최적 시험조건에 관한 연구)

  • Bahng, G.W.;Tak, Nae-Hyung;Hwang, N.M.
    • Journal of the Korean Society for Heat Treatment
    • /
    • v.13 no.1
    • /
    • pp.10-15
    • /
    • 2000
  • Evaluation of long term stability of the Brinell standard hardness tester was carried out to secure its application as a national standard in Brinell hardness. Accuracy and repeatability in load application were tested through evaluating errors in hardness measurement of certified reference blocks. All of those requirements in KS as well as ISO specifications were satisfied by this standard hardness tester. In addition to this, long term stability test of automatic indentation measurement system was carried out. The scattering range was almost the same with its error range. To figure out an optimum test condition for better repeatability and long term stability, the effect of load variation, load application speed and time have been studied using orthogonal array experimental plan. It was found that the best combination is $30{\mu}m/s$ of load application speed and 25 seconds of load application time.

  • PDF

Long-term leach rates of simulated borosilicate waste glasses under a repository condition (처분환경조건에서 모의 방사성폐기물 붕규산유리고화체의 장기침출률)

  • 전관식;김승수;최종원
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.1 no.1
    • /
    • pp.41-46
    • /
    • 2003
  • To understand the long-term leach behavior of a borosilicate Waste glass in a repository, the leaching experiment with three kinds of simulated borosilicate waste glasses has been carried out since the middle of 1997. The five years results indicate that a boron would be applied as an indicator of a long-term leaching of their borosilicate waste glasses and that their long-term leach rates have a tendency to be close to about 0.03g/$m^2$-day even though their compositions and their ratios of the surface area to the volume of leachate are different.

  • PDF

Study on Long-term Performance of Phenolic Foam Insulation through Accelerated Aging Test (가속화 시험을 통한 페놀폼 단열재의 장기성능 비교분석에 관한 연구)

  • Kim, Jin-Hee;Kim, Sang-Myung;Kim, Jun-Tae
    • Journal of the Korean Solar Energy Society
    • /
    • v.40 no.2
    • /
    • pp.11-23
    • /
    • 2020
  • The application of the high-performance insulation materials for buildings seems to be an essential measure for reducing energy use in buildings. Phenolic foam is a readily available insulation material with thermal conductivity of about 0.018 to 0.020 W/(mK). It has the advantage of higher thermal resistance and better fire resistance compared to other conventional building insulation materials. Insulation material used for building envelope is regarded as one of the decisive factors for building's energy load. Furthermore, the degradation of its thermal performance over time increasingly affects the building's energy use demand. Generally, the life span of conventionally built buildings is expected to be more than 50 years, so the long-term performance of insulation materials is critical. This paper aims to evaluate the long-term performance of phenolic form boards through an accelerated aging test. The tests were conducted according to BS EN 13166 and KS M ISO 11561. Based on the results of the accelerated aging test, the thermal performance variation of the material was analyzed, and then its aged value after 25 years was computed. Also, the characteristics of the phenolic foam board's long-term performance were also examined based on the standard testing methods adopted.

Long-Term Trend of Surface Wind Speed in Korea: Anemometer Height Adjustment (한반도 지상 풍속의 장기 추세 분석: 풍속계 고도 보정)

  • Choi, Yeong-Ju;Park, Chang-Hyun;Son, Seok-Woo;Lee, Jae-Won;Hong, Dong-Chan
    • Atmosphere
    • /
    • v.31 no.1
    • /
    • pp.101-112
    • /
    • 2021
  • The long-term trend of surface wind speed in Korea is examined for 31 KMA weather stations from 1985 to 2019. Most stations, except Daegwallyeong, have several times of anemometer height changes from tens of centimeters to several meters. To minimize such height change effect on long-term wind trend, the present study adjusts anemometer height in each station to the standard height of 10 m using the power-law wind profile. This adjustment results in non-negligible trend change. For instance, the increasing surface wind speed at Suwon station, which has six times of anemometer height changes in a range of 0.8 m to 20 m, is weakened up to 67% and becomes statistically insignificant. Likewise, the decreasing trend at Andong station, with three times of anemometer height changes in a range of 10 m to 15.5 m, is weakened up to 66%. A similar weakening in long-term trend is observed in most stations regardless of positive and negative trends. However, due to the cancellation between weakened negative trends and weakened positive trends, the station-averaged wind speed trend in Korea does not change much. This result suggests that anemometer height adjustment is crucial for evaluating local wind speed trend but its impact on nation-wide wind speed trend is rather minor.

Long-Term Shelf Lifetime of Polymer:Nonfullerene Solar Cells Stored under Dark and Indoor Light Environment

  • Lee, Sooyong;Kim, Hwajeong;Kim, Youngkyoo
    • Current Photovoltaic Research
    • /
    • v.8 no.4
    • /
    • pp.107-113
    • /
    • 2020
  • Here we report the long-term stability of polymer:nonfullerene solar cells which were stored under dark and indoor light condition. The polymer:nonfullerene solar cells were fabricated using bulk heterojunction (BHJ) layers of poly[(2,6-(4,8-bis(5-(2-ethylhexyl) thiophen-2-yl)-benzo[1,2-b:4,5-b']dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5',7-bis(2-ethylhexyl)benzo[1',2'-c:4',5'-c']dithiophene-4,8-dione))] (PBDB-T) and 3,9-bis(6-methyl-2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2',3-d']-s-indaceno[1,2-b:5,6-b']dithiophene (IT-M). To investigate their long-term stability, the PBDB-T:IT-M solar cells were stored in an argon-filled glove box. One set of the fabricated solar cells was completely covered with an aluminum foil to prevent any effect of light, whereas another set was exposed to indoor light. The solar cells were subjected to a regular performance measurement for 40 weeks. Results revealed that the PBDB-T:IT-M solar cells underwent a gradual decay in performance irrespective of the storage condition. However, the PBDB-T:IT-M solar cells stored under indoor light condition exhibited relatively lower power conversion efficiency (PCE) than those stored under the dark. The inferior stability of the solar cells under indoor light was explained by the noticeably changed optical absorption spectra and dark spot generation, indicative of degradations in the BHJ layers.

SWR as Tool for Determination of the Surface Magnetic Anisotropy Energy Constant

  • Maksymowicz, L.J.;Lubecka, M.;Jablonski, R.
    • Journal of Magnetics
    • /
    • v.3 no.4
    • /
    • pp.105-111
    • /
    • 1998
  • The low energy excitations of spin waves (SWR) in thin films can be used for determination of the surface anisotropy constant and the nonhomogeneities of magnetization in the close-to-surface layer. The dispersion relation in SWR is sensitive on the geometry of experiment. We report on temperature dependence of surface magnetic anisotropy energy constant in magnetic semiconductor thin films of$ CdCr_{2-2x}In_{2x}Se_4$ at spin glass state. Samples were deposited by rf sputtering technique on Corning glass substrate in controlled temperature conditions. Coexistence of the infinite ferromagnetic network (IFN) and finite spin slusters (FSC) in spin glass state (SG) is know phenomena. Some behavior typical for long range magnetic ordering is expected in samples at SG state. The spin wave resonance experiment (microwave spectrometer at X-band) with excited surface modes was applied to describe the energy state of surface spins. We determined the surface magnetic anisotropy energy constant versus temperature using the surface inhomogeneities model of magnetic thin films. It was found that two components contribute to the surface magnetic anisotropy energy. One originates from the exchange interaction term due to the lack of translation symmetry for surface spin as well as from the originates from the exchange interaction term due to the lack of translation symmetry for surface spin as well as from the stray field of the surface roughness. The second one comes from the demagnetizing field of close-to surface layer with grad M. Both term linearly decrease when temperature is increased from 5 to 123 K, but dominant contribution is from the first component.

  • PDF

The Regulation of AP-1 DNA Binding Activity by Long-term Nicotine Stimulation in Bovine Adrenal Medullary Chromaffin Cells: Role of Second Messengers

  • Lee, Jin-Koo;Choi, Seong-Soo;Suh, Hong-Won
    • The Korean Journal of Physiology and Pharmacology
    • /
    • v.6 no.2
    • /
    • pp.109-112
    • /
    • 2002
  • The signal pathways involved in the regulation of AP-1 DNA binding activity in long-term nicotine stimulated bovine adrenal medullary chromaffin (BAMC) cells have not been well characterized. To understand the involvement of second messengers in the regulation of AP-1 DNA binding activity, the present study was designed to define the time-course for inhibition of nicotine-induced responses by cholinergic antagonists, $Ca^{2+}$ and calmodulin (CaM) antagonists, and calcium/calmodulin-dependent protein kinase (CaMK) II inhibitor using electrophoretic mobility shift assay. Nicotine $(10{\mu}M)$ stimulation increased AP-1 DNA binding activity at 24 hr after treatment. Posttreatment with hexamethonium (1 mM) plus atropine $(1{\mu}M)$ (HA), nimodipine $(1{\mu}M),$ or calmidazolium $(1{\mu}M)$ at 0.5, 3, and 6 hr after the nicotine treatment significantly inhibited the AP-1 DNA binding activity increased by long-term nicotine stimulation. However, posttreatment with HA, nimodipine, or calmidazolium at 9 or 12 hr after the nicotine treatment did not affect the nicotine-induced increase of AP-1 DNA binding activity. The pretreatment of BAMC cells with various concentrations of KN-62 inhibited the increase of AP-1 DNA binding activity induced by nicotine in a concentration-dependent manner. KN-62 $(10{\mu}M)$ posttreatment beginning at 0.5, 3, or 6 hr after the nicotine treatment significantly inhibited the increase of AP-1 DNA binding activity. However, KN-62 posttreatment beginning at 9 or 12 hr after the nicotine treatment did not affect the increase of AP-1 DNA binding activity. This study suggested that stimulation (for at least 6 hr) of nicotinic receptors on BAMC cells was necessary for increase of AP-1 DNA binding activity, and activation of $Ca^{2+},$ CaM, and CaMK II up to 6 hr at least seemed to be required for the increase of nicotine-induced AP-1 DNA binding activity.

Analysis of Drought Hotspot Areas Using Local Indicators of Spatial Association in the Nakdong River Basin (공간연관성 지표를 이용한 낙동강 유역의 가뭄 핫스팟 지역 분석)

  • Son, Ho-Jun;Byun, Sung Ho;Park, Kyung Woon;Kim, Ji Eun;Kim, Tae-Woong
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.43 no.2
    • /
    • pp.175-185
    • /
    • 2023
  • As drought risk increases due to climate change, various research works are underway around the world to respond to drought so as to minimize drought damage. In particular, in recent years, many studies are focused on analyzing regional patterns of drought in a comprehensive manner, however there is still insufficient to quantitatively identify drought-risk areas in a large river basin considering climate change in Korea. In this study, we calculated the Standardized Precipitation Index (SPI) and the Modified Standardized Precipitation Index (M_SPI) as representative meteorological drought index, and performed spatial autocorrelation analysis to identify the drought hotspot region under climate change scenarios of Representative Concentration Pathway (RCP) 4.5 and RCP 8.5. The SPI was calculated by estimating parameters for each observation station within the study area, whereas the M_SPI was calculated by estimating parameters for the entire study area. It is more reasonable to use the M_SPI for assessing meteorological drought from an overall perspective within the study area. When the M_SPI was used, long-term droughts showed drought hotspot areas clearly larger than short-term droughts. In addition, the drought hotspot area moved from the center of the Nakdong River basin to the Seomjin River basin over time. Especially, the moving patterns of the short-term/long-term drought were apparent under the RCP 4.5, whereas the moving patterns of the long-term drought were distinct under the RCP 8.5 scenarios.

Analysis of Water Quality Characteristics According to Short-term Fluctuation of Water Level in the New Dam: Focused on the Upstream Watershed of Yeongju Multipurpose Dam (신규 댐 건설 전후의 수질변동 분석: 영주댐 상류유역을 중심으로)

  • Lee, Saeromi;Park, Jae Roh;Hwang, Tae Mun;Ahn, Chang Hyuk
    • Journal of Korean Society on Water Environment
    • /
    • v.36 no.5
    • /
    • pp.431-444
    • /
    • 2020
  • The relationship between dam construction and water quality has recently come to be considered an important issue. A dam is a physical factor which causes changes to the river system around it. Considering these points, this study was conducted to obtain basic data by analyzing the relationship between water level fluctuations and water quality parameters in the short-term. In terms of methodology, the new construction of the Yeongju Dam (M5) in 2016 was divided into Stage 1 as the lotic system and Stage 2 as the lentic system, with four years in each period, and the water level fluctuations and water quality were analyzed using official data. As a result of this study, M5, a stagnant area in which organic matter and nutrients accumulate, was found to be an important factor in water quality management. In addition, the water level changed rapidly (0.9±0.2 m → 10.9±7.1 m) as the river environment condition was converted from the lotic system to the lentic system. In addition, water quality parameters such as BOD, COD, TOC, and Chl-a significantly changed in the short-term. Further, since the transport of organic matter and nutrients occurred well in the lotic system, sedimentation was expected to be dominant in the lentic system. Therefore, it was determined that when the river flow is blocked, autochthonous organic matter is an important factor for long-term water quality management in the future. This process can increase the trophic state of the water body. As a result of this study, the TSIKO value was converted from mesotrophic in Stage 1 to eutrophic in Stage 2. Eventually, short-term changes in the river environment will affect not only changes in water level but also changes in water quality. Thus, a comprehensive and strategic approach is needed for long-term water quality management in the future.