• Journal of Sensor Science and Technology
• /
• v.21 no.4
• /
• pp.293-297
• /
• 2012

CsI:Gd crystal was grown by the Bridgeman method and its scintillation properties were investigated. The wavelength peak of the luminescence spectrum for the crystal excited by X-ray was 419 nm. The range of the spectrum was from 300 nm to 800 nm. The spectrum well matched to the quantum efficiency of a typical bi-alkali photo-multiplier tube(PMT). An energy resolution of 48.2 % was obtained for 662 keV ${\gamma}$-rays of $^{137}Cs$. The three decay times were obtained as a fast(557.4 ns, 42.2 %), intermediate (1.78 ${\mu}s$, 29.7 %) and slow (5.43 ${\mu}s$, 28.1 %) components, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.9
• /
• pp.846-850
• /
• 2005

[ $SrTiO_3$ ]:Al, Pr red phosphors for FED were synthesized by solid state reaction method. The dependence of their luminescent properties on Sr and Al concentration was investigated. The $SrTiO_3$: Al, Pr phosphors showed the characteristic X-ray diffraction patterns of the perovskite structure. Photoluminescence intensity and lattice constant in $SrTiO_3$: Al, Pr phosphors changed in quite a similar manner with Sr concentration. Photoluminescence intensity increased with increasing lattice constant, and the decrease of photoluminescence intensity and lattice constant occurred in the vicinity of 1 mol Sr concentration.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.581-584
• /
• 2008

$BaMgP_2O_7$:Eu,Mn phosphors for white emission were synthesized and their luminescent properties were investigated under UV excitation. The phosphor emits two colors: a blue band by $Eu^{2+}$ and a red band by $Mn^{2+}$. Due to the efficient energy transfer from $Eu^{2+}$ to $Mn^{2+}$, the red emission positioned at 615 nm is greatly enhanced with increasing $Mn^{2+}$ content up to 17.5 mol%.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1469-1472
• /
• 2006

We investigated the electrical and optical properties of ZnO:Al thin films as a function of the thermal process conditions. The film was prepared by RF magnetron sputtering followed by annealing in a box furnace in air. An ZnO:Al (98:2) alloy with the purity of 99.99% (3 inch diameter) was used as the target material. The electrical properties of the transparent electrode, exhibited surface oxidation as a result of rapid oxygen absorption with increasing annealing temperature. The processed ZnO:Al films and commercial ITO(indium-tin-oxide) were applied to an OLED stack to investigate the current density and luminescence efficiency. The efficiency of the device using the ZnO:Al electrode was higher than that from the device using the ITO electrode.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1523-1525
• /
• 2005

$CaZrO_3:Tb$ as a new green-emitting phosphor, has been synthesized by solid state reaction. Photoluminescence and cathodoluminescence properties for the phosphor with a Perovskite structure were investigated. The $CaZrO_3:Tb$ phosphor, which has several emission peaks due to energy transfer from $^5D_4$ to $^7F_J(J=6,5,4,3)$ of $Tb^{3+}$ ion, exhibited strong green luminescence with the main emission peak centered at 545 nm. Optimum Tb concentration was 0.02mol%.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1495-1498
• /
• 2005

Due to an efficient red emission, $Eu^{+3}$ ions have doped in various host materials. Eu-doped $LaPO_4/LaPO_4$ core/shell nanophosphor which emits red light in visible range, was synthesized by using a solution system. The mean size of the nanoparticle observed by TEM was about 7-8 nm. In this core/shell system, the thickness of $LaPO_4$ shell was optimized on the basis of relative PL emission intensity. In addition, the luminescent properties of $LaPO_4:Eu/LaPO_4$ core/shell particle have been compared with Eu-doped $LaPO_4$ bulk particle and nanoparticle.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12
• /
• pp.1121-1124
• /
• 2003

We report the photo (PL) and electro luminescence (EL) properties of new conjugated compounds based on imidazole moiety, 4,4' -di(4,5 diphenyl-N-imidazolyl)stilbene(DDPIS) and 4,4'-di(2,4,5-triphenyl-N-imidazolyl)stilbene(DTPIS), as emitting materials. ITO/m-MTDATA/NPB/DDPIS/Alq3/LiF/AI device shows blue EL spectrum at 456 ㎚ and 0.3 cd/ A and turn on voltage at 7 ∼ 8 V. DTPIS shows blue EL spectrum at around λmax=453㎚ and 0.5 cd/A efficiency in ITO/m-MTDATA/NPB/DTPIS/Alq3/LiF/Al device.

• Journal of the Korean Ceramic Society
• /
• v.34 no.4
• /
• pp.429-435
• /
• 1997

The third order nonlinear optical susceptibilities, {{{{ chi }}(3), of the CuCl doped alumino-borosilicate glasses were measured by the two beam configuration DFWM method and the absorption saturation method, and the measured {{{{ chi }}(3) values were about 10-8 esu in both methods. The response time was estimated to be about 105ps from the time decay curve of the luminescence spectra obtained by time-correlated single-photon counting (TCSPC) method.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.12
• /
• pp.3668-3670
• /
• 2014

• Applied Science and Convergence Technology
• /
• v.23 no.6
• /
• pp.387-391
• /
• 2014

Self-assembled InAlAs/AlGaAs quantum dots (QDs) on GaAs substrates were grown by using modified molecular epitaxy beam in Stranski-Krastanov method. In order to study the structural and optical properties of InAlAs/AlGaAs QDs, atomic force microscopy (AFM) and photoluminescence (PL) measurements are conducted. The size and uniformity of QDs have been observed from the AFM images. The average widths and heights of QDs are increased as the deposition time increases. The PL spectra of QDs are composed of two peaks. The PL spectra of QDs were analyzed by the excitation laser power- and temperature-dependent PL, in which two PL peaks are attributed to two predominant sizes of QDs.