• Nuclear Engineering and Technology
• /
• v.32 no.4
• /
• pp.350-360
• /
• 2000

In Korea, the dose limits are reduced and are set at the ICRP-60 iimits. However, derived limits tabulated as MPC in air and water are still specified in Notice No.98-12. There are some discrepancies between the primary dose limits and MPCs in air and water. Therefore, in order to accept ICRP-60 recommendations fully, derived limits such as ALI, DAC, ECL for radiological protection against ionizing radiation based on ICRP-60 recommendations were calculated using modified methods of those of 10 CFR part 20, dose limits and committed effective dose coefficients of the Basic Safety Standards of the IAEA. The derived limits in this study were also compared with those prescribed in 10 CFR part 20 as well as MPCs of Notice No. 98-12 in order to analyze the impact of implementing derived limits on nuclear facilities. ECLs in air and water for the control of radioactive discharge into the environment in this study are shown to have lower values (i.e. more conservative), for most part, than those in Notice No. 98-12. Especially, for uranium elements, ECLs in water are approximately a magnitude in the order of two lower than those in Notice No.98-12.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.3
• /
• pp.17-25
• /
• 1997

This paper aims to clarify the effects of grinding conditions on the grinding force, ground surface and chipping size of workpiece in surface grinding of various ferrites with the resin bond diamond wheel. The main conclusions obtained were as follows: In a constant peripheral wheel speed, the specific grinding energy is fitted by straight lines with grinding depth coefficient($\delta$) in a logarithmic graph. The effect of both depth of cut and workpiece speed on grinding energy becomes larger in the order of Mn-Zn, Cu-Ni-Zn and Sr. When using the diamond grain of the lower toughness, the roughness of the ground surface becomes lower. The ground surfaces show that the fracture process during grinding becomes more brittle in the order of Sr, Mn-Zn and Cu-Ni-Zn. The chipping size at the corner of workpiece in grinding increases with the the increases of the depth of cut and workpiece speed, and the decrease of peripheral wheel speed. The effect of both depth of cut and workpiece speed on chipping size becomes more larger in the order of Sr, Mn-Zn and Cu-Ni-Zn.

• Applied Biological Chemistry
• /
• v.31 no.3
• /
• pp.249-254
• /
• 1988

Physicochemical properties of starches from the rices of Akibare, Samgang and Mahatma and hardness of the cooked rice were examined Water binding capacity and amylose content were heigher in Samgang. Peak viscosity and breakdown were heigher in order of Akibare, Samgang and Mahatma, while consistency and set back were reverse order. Hydrolytic patterns of three starches with 2.2N HCl at $35^{\circ}C$ showed two distinct stages. Hydrolysis extent of Mahatma starch was lower than those of Akibare and Samgang starches. The relative crystallinities of these starches were heigher in order of Mahatma, Akibare and Samgang. Mahatma was more resistant to heat and acid treatments, lower in water binding capacity and harder when it was cooked.

• Korean Journal of Remote Sensing
• /
• v.19 no.2
• /
• pp.149-157
• /
• 2003

In this study, for efficient replacement of sensor modelling of high-resolution satellite imagery, image segmentation method is applied to the test area of the SPOT-3 satellite imagery. After that, a third-order polynomial model in the sectioned area is compared with the RFM which Is to the entire in the test area. As results, plane error of the third-order polynomial model is lower(approximately 0.8m) than that of RFM. On the other hand, height error of RFM is lower(approximately 1.0m).

• Asia-Pacific Journal of Business
• /
• v.15 no.2
• /
• pp.71-88
• /
• 2024

Purpose - This study provides an overview of existing research and practices related to market risk premiums(MRP), and empirically estimates the MRP in Korea, particularly using the related option prices. We also seek to improve the current MRP practices and explore alternative solutions. Design/methodology/approach - We present the option price-based MRP estimation method, as proposed by Martin (2017), and implement it within the context of the Korean stock market. We then juxtapose these results with those derived from other methods, and compare the characteristics with those of the United States. Findings - We found that the lower limit of the MRP in the Korean stock market shows a much lower value compared to the US. There seems to be the possibility of a market crash, exchange rate volatility, or a lack of option trading data. We investigated the predictive power of the estimated values and discovered that the weighted average of the results of various methodologies using the Principal Component Analysis (PCA) is superior to the individual method's results. Research implications or Originality - It is required to explore various methods of estimating MRP that are suitable for the Korean stock market. In order to improve the estimation methodology based on option prices, it is necessary to develop the methods using the higher-order(third order or above) moments, or consider additional risk factors such as the possibility of a crash.

• Journal of Fashion Business
• /
• v.26 no.1
• /
• pp.30-40
• /
• 2022

This study aims to provide basic information on the changes in lower body measurements and shapes of women in their 20s for developing better fitting slacks patterns and a more applicable sizing system that can be widely utilized for women of all ages. Factor and cluster analysis were performed on 1,360 women's direct measurement data within the age group from the 5^th (2004) and 7^th (2015) Korean Human Body Measurement Investigation. The factor analysis identified four factors and explained 82.54% of the total variance; Factor 1, horizontal measurements of lower body; Factor 2, vertical lengths of lower body; Factor 3, measurements of leg and hip areas; Factor 4, lengths of hip and crotch areas. The cluster analysis categorized the lower body shapes of each age group into four shapes; Shape 1, a petite lower body with short legs; Shape 2, a long lower body with medium built; Shape 3, an obese abdomen and legs; Shape 4, a short and slim lower body. Shape 4 (36.5%), Shape 2 (31.2%), Shape 1 (27.8%), and Shape 3 (4.5%) were placed in the order of frequency from the highest to lowest among all the age groups. The findings of this study showed gradual changes in the lower body measurements and shapes of women in their 20s and relevant physical features of each age group. They can be utilized for developing women's slacks patterns with better fitting and more comfort.

• Korean Management Science Review
• /
• v.19 no.2
• /
• pp.221-235
• /
• 2002

Many people are getting more and more interested in the value of information sharing in a supply chain in proportion to the development of information technology in these days. In spite of much interest in the value of shared information, the related studies concluded that the effect of only sharing information strategy between upper and lower level is not large However, many related companies want to link each channel members in the supply chain with on-line to expect to reduce the cost by means of information sharing. This study wants to evaluate the alternative strategy to reduce more related costs than only sharing information strategy. This paper analyzed that how much the total supply chain cost is to change in the case of a transfer of decision rights from the lower (retailers) to the upper level (depot, vendor) in a supply chain. The decision rights mean the rights of being able to decide when to order, how much to order, where to order, and what mode to transport or distribute, etc. in a supply chain. By the experimental simulation study to the simple case, the strategy to share only information took the low effect of 1～2%, but the strategy to transfer the decision lights from the lower to the upper member had larger effect of about 5%. However. for the strategies to work well, it needs to cooperate closely among each supply chain members, and the fruits from the transfer of decision rights in a supply chain are allocated to each chain members reasonably Therefore, there needs to study in the future not only the exact transfer effect of decision rights, but the reasonable allocation method of the fruits among the chain members.

• 한국해양학회지
• /
• v.30 no.4
• /
• pp.288-301
• /
• 1995

Rates of the sedimentation and particle mixing have been estimated by applying uranium-series disequilibrium techniques to three sediment cores collected from the korea Deep Ocean Study (KODOS) site between the clarion and Clipperton Fracture Zones (CCFZ) of the Equatorial Pacific. Sedimentation rates based on the profiles of excess /SUP 230/Th activity and /SUP 230/ Th/SUB xs//SUP 232/ Th activity ratios at the southeastern part of the study area were estimated to be in the order of a few millimeters per thousand year, while at the northwestern part a factor of ten lower. Excess activities of /SUP 230/Th and /SUP 230/Th ratios showed intervals of constant values in the upper part of the sediment cores, probably generated by biological particle mixing. A "two-box" advection-diffusion steady state mixing model was employed in order to estimate particle mixing rates in the upper and the lower layers, based on the distribution profiles of excess /SUP 210/Pb activities. Particle mixing coefficients were estimated to be in the order of 10$^1$ cm$^2$/y in the upper layer and 10/SUP -1/-10/SUP 0/ cm$^2$/y in the lower layer.

• Physical Therapy Korea
• /
• v.14 no.1
• /
• pp.11-20
• /
• 2007

The objective of this study was to discern the effects of a balance training program on the performance of lower extremities in order to improve strength (muscle power, flexibility, walking power), balance control and walking ability in the elderly. The subjects selected were aged 65 years and over, with no known relevant medical history that may disturb their balance, and have also been visiting the Gimhae Senior Welfare Center. The variable group consisted of 30 subjects, of whom were people who had been participating in balance training programs (One Leg Standing; OLS, Functional Reach; FR, Timed Get Up and Go; TUG) as an intervention for 8 weeks 3 times per a week. They were examined in order to identify their balance control before and after. The control group consisted of thirty subjects who preferred to exercise without any intervention relating to balance training program. The subjects were measured before and after balance training in order to determine the effectiveness of exercise and the effectiveness of exercise combined with the aid of a Balance Performance Monitor. 1. Mean time on OLS test with left and right sided extremities in the experimental group was 35.44 sec, 42.10 sec longer than control group respectively. In FR tests applied to the left and right side, mean reaching distance was increased up to 5.56 cm, 6.73 cm in experimental group respectively. Mean time on TUG test from a chair in experimental group was decreased to 2.33 sec. 2. Mean value of decline in the level balance control, both left and right side, decreased to 2.24% as examined by the Balance Performance Monitor. Mean scores for sway level after balance training decrease to .98% and for balance control both anterior and posterior directions decreased to mean 1.07% and 1.44%, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.5
• /
• pp.605-609
• /
• 2003

The lower-order lithium organocyanocuprate compound, (THF)₃Li(NC)Cu($C_6$H₃-2,6-Mes₂) (1), and the bulky terphenyl Grignard reagent, Br(THF)₂Mg($C_6$H₃-2,6-Trip₂) (2), have been synthesized and structurally characterized both in the solid state by single crystal x-ray crystallography and in solution by multi-nuclear NMR and IR spectroscopy. The compound (1) was isolated as a monomeric contact ion-pair in which the C (organic ipso)-Cu-CN-Li atoms are coordinated linearly. The lithium has a tetrahedral geometry as a result of solvation by three THF molecules. The compound (1) is the first example of fully characterized monomeric lower order lithium organocyanocuprate. The bulky Grignard reagent (2) was also isolated as a monomer in which the magnesium, solvated by two THF molecules, has a distorted tetrahedral geometry. The crystals of (1) possess triclinic symmetry with the space group $P{\={1}}$, Z = 2, with a = 12.456(3) Å, b = 12.508(3) Å, c = 13.904(3) Å, α = 99.81°, β = 103.72(3)°, and γ = 119.44(3)°. The crystals (2) have a monoclinic symmetry of space group $P2_{1/C}$, Z = 4, with a = 13.071(3) Å, b = 14.967(3) Å, c = 22.070(4) Å, and β = 98.95(3)°.