• Nuclear Engineering and Technology
• /
• 제45권2호
• /
• pp.257-264
• /
• 2013

In Canada Deuterium Uranium (CANDU)-type nuclear power plants, the reactor is composed of 380 fuel channels and refueling is performed on one or two channels per day. At the time of refueling, the fluid force of the cooling water inside the channel is exploited. New fuel added upstream of the fuel channel is moved downstream by the fluid force of the cooling water, and the used fuel is pushed out. Through this process, refueling is completed. Among the 380 fuel channels, outer rows 1 and 2 (called the FARE channel) make the process of using only the internal fluid force impossible because of the low flow rate of the channel cooling water. Therefore, a Flow Assist Ram Extension (FARE) tool, a refueling aid, is used to refuel these channels in order to compensate for the insufficient fluid force. The FARE tool causes flow resistance, thus allowing the fuel to be moved down with the flow of cooling water. Although the existing FARE tool can perform refueling in Korean plants, the coolant flow rate is reduced to below 80% of the normal flow for some time during refueling. A Flow rate below 80% of the normal flow cause low flow rate alarm signal in the plant operation. A flow rate below 80% of the normal flow may cause difficulties in the plant operation because of the increase in the coolant temperature of the channel. A new and improved FARE tool is needed to address the limitations of the existing FARE tool. In this study, we identified the cause of the low flow phenomena of the existing FARE tool. A new and improved FARE tool has been designed and manufactured. The improved FARE tool has been tested many times using laboratory test apparatus and was redesigned until satisfactory results were obtained. In order to confirm the performance of the improved FARE tool in a real plant, the final design FARE tool was tested at Wolsong Nuclear Power Plant Unit 2. The test was carried out successfully and the low flow rate alarm signal was eliminated during refueling. Several additional improved FARE tools have been manufactured. These improved FARE tools are currently being used for Korean CANDU plant refueling.

• 소음진동
• /
• 제9권1호
• /
• pp.85-96
• /
• 1999

For ASME Code pumps in nuclear power plants, inservice test is required to assess the operational readiness in accordance with ASME code and related regulations. The objective of this study therefore, is to develop the technical background of the degradation of pump performances and conditions due to low flow rate operation. In addition. the detection techniques of pump operating conditions are to be developed to enhance the safety and economy of nuclear power plants. A test loop consisted of pump, motor. water tank, flow rate measurements and piping system with flow control devices was established for this study. Two typical pumps, 1-stage volute pump and 3-stage turbine pump, were selected and the test was performed upon two major point of views ; i.e., pump discharge pressure pulsations analysis and pump vibration spectrum analysis. From the test results, it is concluded that (1) the pump vibration affected by the natural frequency of operating pump is significant in the low frequency zone (around 1 Hz) : the vibration amplitude. especially. is an important factor during low flow rate operation. and shall be monitored to ensure that it is within the limit of ASME OM code Part 6, (2) the vibration frequency and pump discharge pressure are affected by vane pass frequency and running speed, (3) the wave phenomena due to the compressiblity of water is anticipated during low flow rate operation. and the pump system shall be designed to prevent it and. finally, (4) the technical background of the degradation of pump performances and conditions due to low flow rate operation is provided.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권8호
• /
• pp.1116-1124
• /
• 2005

The influence of fiber content of hay (low-fiber 47% NDF and high-fiber 62% NDF of DM) and concentrate level (high 50% and low 20% of ration DM) on chewing activity, passage rate and nutrient digestibility were tested on four restrict-fed (11.1 to 13.7 kg DM/d) Holstein cows in late lactation. Aspects of ruminal fermentation and digesta particle size distribution were also investigated on two ruminally cannulated (100 mm i.d.) cows of the same group of animals. All digestion parameters studied were more affected by the fiber content of the hay and its ratio to non structural carbohydrates than by the concentrate level. Giving a diet of high-fiber (62% NDF) hay and low concentrate level (20%) increased chewing activity but decreased solid passage rate and total digestibility of nutrients due to a limited availability of fermentable OM in the late cut fiber rich hay. A supplementation of high-fiber hay with 50% concentrate in the diet seems to improve the ruminal digestion of cell contents, whilst a depression of the ruminal fiber digestibility was not completely avoided. Giving a diet of low-fiber (47% NDF) hay and high concentrate level (50%) reduced markedly the chewing and rumination activity, affected negatively the rumen conditions and, consequently, the ruminal digestion of fiber. A reduction of the concentrate level from 50 to 20% in the diet of low-fiber hay improved the rumen conditions as reflected by an increase of the ruminal solid passage rate and of fiber digestibility and in a decrease of the concentration of large particles and of the mean particle size of the rumen digesta and of the faeces. Generally, it can be summarised that, (i) concentrate supplementation is not a strategy to overcome limitations of low quality (fiber-rich) hay, and (ii) increase of the roughage quality is an effective strategy in ruminant nutrition, especially when concentrate availability for ruminants is limited.

• 한국통신학회논문지
• /
• 제34권2C호
• /
• pp.145-152
• /
• 2009

임펄스 기반의 초광대역 통신 기술은 이론적으로 근거리에서 고속의 데이터 전송과 고해상도의 거리 인지 및 무선 측위가 가능하다는 장점을 가지고 있지만 이러한 기능들을 수행하기 위해서는 우선적으로 고속의 ADC (Analog to Digital Convertor)가 요구되며 특히, 시간 기반의 무선 측위 기법을 적용할 경우 더욱 그러하다. 그러나 현실적으로 GHz 이상의 고속의 ADC는 매우 고가이기 때문에 본 논문에서 목표로 하는 저비용을 고려한 저속의 무선 개인 영역 네트워크 (Low Rate - Wireless Personal Area Network; LR-WPAN)에서는 부적합하다. 따라서 본 논문에서는 저속의 ADC로 고정밀의 무선 측위가 가능한 주파수 영역에서의 측위 기법을 소개하고 아날로그 단에서 주파수 변환을 위해 FM (Frequency Modulation) 방식을 접목시킨 새로운 형태의 non-coherent 기반의 수신 구조를 제안한다. 제안된 기법에 대한 성능을 검증하기 위해서 IEEE 802.15.4a TG에서 제시한 채널 모델을 적용하였으며 시뮬레이션 결과로부터 제안된 방안의 우수성을 검증하였다.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제1권1호
• /
• pp.47-54
• /
• 2012

모바일 환경에서의 동영상 콘텐츠는 네트워크 트래픽과 같은 성능을 고려하여 일반 동영상에 비해 비트율이 낮은 비디오 영상을 처리하게 되고, 비트율이 낮은 동영상에 대한 소유권 보호의 필요성이 요구된다. 따라서 모바일 장치는 퍼스널 컴퓨터와 성능면에서 많은 차이점을 가지고 있으므로 모바일 장치에서 디지털 미디어를 보호하기 위해서는 모바일 환경에 적합한 워터마킹 처리 알고리즘을 개발해야 한다. 본 논문은 M-Commerce 환경에서 모바일 장치의 낮은 성능을 고려하여 비트율이 낮은 비디오 콘텐츠에 대한 비시각적인 대역 확산(Spread Spectrum) 워터마킹 기법을 제안하고, 동영상 콘텐츠의 불법적인 행위자들을 추적하여 소유권의 보호를 보장할 수 있다. 워터마크가 내장된 콘텐츠의 공격에 대한 강인성의 평가는 워터마크를 제거하거나 손상된 콘텐츠를 추출 알고리즘의 상관관계(Correlation)로 나타낸다. 실험 결과에 따르면 워터마크의 강인성을 평가하기 위해 워터마크가 내장된 영상을 압축한 후 M-Sequence의 주기를 추출한 결과 모든 영상에서 고유한 M-Sequence의 주기를 쉽게 검출할 수 있었다. 따라서 비트율이 낮은 콘텐츠에서도 워터마크 추출을 보장하여 불법적인 사용자의 추적이 가능할 것으로 예상된다.

• 한국해양생명과학회지
• /
• 제7권2호
• /
• pp.213-220
• /
• 2022

본 연구는 저염분 상태에서 수온 및 사육밀도와 같은 환경요인이 흰다리새우(Litopenaeus vannamei)의 성장에 미치는 영향을 조사하기 위하여 수행하였다. 연구 결과, 흰다리새우는 저염분 상태에서 전반적으로 수온이 높을수록 생존율이 높게 나타났고, 사육밀도가 낮을수록 생존율이 높아졌다. 사료효율에 관한 연구에서는 수온이 높을수록 증체량(WG)이 증가하였고, 사육밀도가 증가할수록 증체량은 감소하였다. 수온이 높을수록(수온 31℃) 성장 속도가 빨랐다. 또한 사육밀도에 따른 성장도의 평가에서도 사육밀도가 낮은 상태에서 성장 속도가 빨라지는 것을 확인하였다. 본 연구 결과를 흰다리새우의 최적 성장을 위한 적정 사육밀도 및 사육수온의 결정에 유용하게 적용되리라 사료된다.

• 보건행정학회지
• /
• 제1권1호
• /
• pp.27-41
• /
• 1991

The purpose of this study is to estimate cesarean section rate in Korea and analyze characteristics of health care institution which affect regional variation in the rate. We have searched vaginal and cesarean section deliveries among Diagnosis Related Group dat based upon insurance claim bills which have been submitted to Korean Insurance Corporation for two years since March, 1985. The results are as follows: 1. Out of all delivery cases of 87,500, cesarean section rate was 16.3% (14,299 cases). 2. Cesarean section rate varied according to size and ownership of health care institutions. In above 6- bed sized hospitals, the rate was at about 20% higher than small sized institutions, but rather in hospitals that have more than 500 beds, it was somewhat low. Classified by the hospital ownership, the rate was low at 18.4% in hospitals of religious organization and highest at private or corporate hospitals. 3. This study shows large regional variation in cesarean section rate; there are two times differences between region with the highest and lowest rate. Strongly related factors in that variation was the ownership of health care institution and urbanization variables. Low level of cesarean section rate in a region is explained by high proportion of delivery cases at institutions of religious organization and at insitutions in county level site. This result shows that apart from medical conditions of patients, indications of cesarean section differs from health care providers, and especially ownership of institution strongly affect them. Cesarean section rate in Korea is supposed to be at high level and development of utilization review programs to keep appropriate cesarean section rate is needed.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제23권4호
• /
• pp.221-228
• /
• 2023

Background: We assessed the relationship between patient age and remifentanil dosing rate in patients managed under general anesthesia with spontaneous breathing using low-dose remifentanil in sevoflurane. Methods: The participants were patients with an American Society of Anesthesiologists Physical Status of 1 or 2 maintained under general anesthesia with low-dose remifentanil in 1.5-2.0% sevoflurane. The infusion rate of remifentanil was adjusted so that the spontaneous respiratory rate was half the rate prior to the induction of anesthesia, and γ^H (㎍/kg/min) was defined as the infusion rate of remifentanil under stable conditions where the respiratory rate was half the rate prior to the induction of anesthesia for ≥ 15 minutes. The relationship between γ^H and patient age was analyzed statistically by Spearman's correlation analysis. Results: During dental treatment under general anesthesia using low-dose remifentanil in sevoflurane, a significant correlation was detected between γ^H and patient age. The regression line of y = - 0.00079 x + 0.066 (y-axis; γ^H, x-axis; patient's age) was provided. The values of γ^H provide 0.064 ㎍/kg/min at 2 years and 0.0186 ㎍/kg/min at 60 years. Therefore, as age increases, the dosing rate exhibits a declining trend. Furthermore, in the dosing rate of remifentanil when the patient's respiratory rate was reduced by half from the preanesthetic respiratory rate, the dosing rate provided was around 0.88 mL/h in all ages if the remifentanil was diluted as 0.1 mg/mL. EtCO₂ showed 51.0 ± 5.7 mmHg, and SpO₂ was controlled within the normal range by this method. In addition, all dental treatments were performed without major problems, such as awakening and body movement during general anesthesia, and the post-anesthetic recovery process was stable. Conclusion: General anesthesia with spontaneous breathing provides various advantages, and the present method is appropriate for minimally invasive procedures.

• 접착 및 계면
• /
• 제7권4호
• /
• pp.45-52
• /
• 2006

Five low molar ratio urea-formaldehyde (LUF) resins were synthesized in this study. The effects of molar ratio, free formaldehyde content, and catalysts on the curing characteristics of LUF resins were studied by measuring its free formaldehyde content, pH value change after catalysts added, curing rate, and pot life, observing its cured appearance, and analyzing its thermal behavior. The results indicate that: 1) The LUF resin with lower molar ratio than 1.0 can still cure; 2) Free formaldehyde content is not the main factor in affecting curing rate of LUF resin; 3) Compared with ammonium chloride as a traditional catalyst, persulfate salts markedly accelerate the curing rate of LUF resin, and result in the different appearance; 4) the addition of sodium chloride to catalysts can accelerate the curing rate of LUF resin, but the effect is moderate.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권4호
• /
• pp.263-271
• /
• 2013

A low dropout regulator (LDO) with fast transient responses is presented. The proposed LDO eliminates the trade-off between slew rate and unity gain bandwidth, which are the key parameters for fast transient responses. In the proposed buffer, by changing the slew current path, the slew rate and unity gain bandwidth can be controlled independently. Implemented in $0.18-{\mu}m$ high voltage CMOS, the proposed LDO shows up to 200 mA load current with 0.2 V dropout voltage for $1{\mu}F$ output capacitance. The measured maximum transient output voltage variation, minimum quiescent current at no load condition, and maximum unity gain frequency are 24 mV, $7.5{\mu}A$, and higher than 1 MHz, respectively.