• KIISE Transactions on Computing Practices
• /
• v.21 no.6
• /
• pp.412-417
• /
• 2015

Context-sensitive spelling errors (CSSE) are hard to correct, since they are perfect words when analyzed alone. Determined only by considering the semantic and syntactic relations of their context, CSSEs affect largely the performance of spelling and grammar checkers. The existing Korean Spelling and Grammar Checker (KSGC 4.5) adopts a rule-based method, which uses hand-made correction rules for CSSEs. Using rule-based method, the KSGC 4.5 is designed to obtain the very high precision, which results in the extremely low recall. In this paper, we integrate our previous works that control the CSSE correction rules, in order to improve the recall without sacrificing the precision. In addition to the integration, facultative insertion of adverbs and conjugation suffix of predicates are also considered, as for constraint-loosening linguistic features.

• Computers and Concrete
• /
• v.12 no.2
• /
• pp.131-149
• /
• 2013

Various types of reinforcement splicing methods have been developed and implemented in reinforced concrete construction projects for achieving the continuity of reinforcements. Due to the complicated reinforcement arrangements and the difficulties in securing bar spacing, the traditional lap splicing method, which has been widely used in reinforced concrete constructions, often shows low constructability and difficulties in quality control. Also, lap spliced regions are likely to be over-reinforced, which may not be desirable in seismic design. On the other hand, mechanical splicing methods can offer simple and clear arrangements of reinforcement. In order to utilize the couplers for the ribbed-deformed bars, however, additional screw processing at the ends of reinforcing bars is typically required, which often lead to performance degradations of reinforced concrete members due to the lack of workmanship in screw processing or in adjusting the length of reinforcing bars. On the contrary, the use of screw-ribbed reinforcements can easily solve these issues on the mechanical splicing methods, because it does not require the screw process on the bar. In this study, the mechanical coupler suitable for the screw-ribbed reinforcements has been developed, in which any gap between the reinforcements and sleeve device can be removed by grouting high-flow inorganic mortar. This study presents the uniaxial tension tests on the screw-ribbed reinforcement with the mechanical sleeve devices and the cyclic loading tests on RC columns with the developed coupler. The test results show that the mechanical sleeve connection developed in this study has an excellent splicing performance, and that it is applicable to reinforced concrete columns with a proper confinement by hoop reinforcement.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.23
• /
• pp.10095-10099
• /
• 2015

Background: The present study was conducted to determine knowledge level of technicians working in hospitals about testicular cancer (TC) and self-examination of testicles (TSE) and to determine levels of consciousness and implementation status about TSE. Materials and Methods: This cross-sectional study was conducted with technicians working in hospitals (n=243) between $2^{nd}$ January-$31^{st}$ May 2012 at private and governmental hospitals in urban Kayseri. Healthy control subjects (n=235) who were similar to technicians in terms of age, education level and income status were also included to the study. Chi-square test was used in comparison of categorical variables. Results: Technicians were significantly more aware of TC than controls, but the latter were found to have significantly more information about TSE. There was no significant difference between the two groups in terms of knowing how to do TSE and 80% of both groups were unaware this exam. Of technicians, 19.8% and of controls, 25.5% did TSE, the difference being statistically insignificant. First reason for not doing TSE was "not-knowing" among technicians (48.1%) while it was "ignorance" among controls (66.8%). Of technicians doing TSE, 37.5% did as it came to their mind while 51.7% of controls performed TSE several times in the previous year. Technicians were significantly more afraid of getting TC than controls (p=0.037). Conclusions: It was determined in the present study that rates of TSE were similar between technicians and controls. However compliance with the recommended frequency and right method was low. Consequently, public health education should be planned and applied in order to increase the knowledge of TC and TSE.

• Applied Biological Chemistry
• /
• v.38 no.4
• /
• pp.334-339
• /
• 1995

In order to prolong freshness of garlic, the effect of different predrying treatments on quality characteristics during predrying and storage was investigated. As a result of being applied continuous predrying methods dried for 24 hours a day and discontinuous methods dried for 9 hours and left for 15 hrs a day at 30, 40, $50^{\circ}C$ respectively, it was appropriate the discontinuous predrying method at $40^{\circ}C$ for 7 days and the continuous method at $30^{\circ}C$ for 6 days of which predrying period was taken less time and the loss of pyruvate and thiosulfinate content were low. The predried garlic was stored at $-3.5^{\circ}C$ for 6 months to examine the effect of predrying on quality during storage. Predried garlic had less rotting ratio than control but was not different in sprouting ratio.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2000.04a
• /
• pp.178-181
• /
• 2000

In order to develop the novel gene expression system, we introduced new control elements which could influence the foreign gene expression in animal cells. When the foreign genes are introduced into the genome of higher eukaryotic cells, the expressions from these integrated genes are often low and can vary greatly depending on the positions of the integration sites due to the complex nature of the chromatin structures (1). First we screened the various DNA sequence elements which can function as an insulator of gene expression from these position effects and can cooperate with the SV40 enhancer/promoter. Among the several DNA elements from the various sources, we identified the particular DNA element which confers the increased frequency of the positive colonies, assayed by the reporter gene from stable selections indicating significantly reduced position effects. This element also showed the several fold-increased expression level as well as the copy-number dependent expression with host cell specificity. Second we modified the transcription termination element where we introduced the specific terminator in combination with SV40 polyA signal. This modified terminator showed the increased efficiency and the level of the gene expression. By combining these two elements, we made the animal cell expression system and tested successfully for the recombinant protein productions of TGF ${\beta}$-soluble receptor, Antithrombin III, and single chain Pro-Urokinase. [Supported by grants from MOCIE]

• Journal of Multimedia Information System
• /
• v.1 no.2
• /
• pp.111-118
• /
• 2014

The Smart grid refers to the technology that enables efficient usage of electric power by collecting information concerning the power usage and power lines grafting information and communications technology to onto power grids. There are Zigbee, PLC or IEEE 802.11 WLAN MAC as a core technology of the Smart grid, but in this paper, the discussion is focused on the PLC. The PLC is the technology that carries out data communications using power lines and put into practical use in the field of lights or home appliances control recently but PLC-applied communications between electronic devices are rarely seen. For the reason that the PLC uses high-voltage power lines and has a disadvantage of experiencing higher data loss rate caused by the noises produced by going through transformers, the technology is yet to be used in many areas. Nevertheless, the PLC has been studied widely recently in respect that it's the low-cost communication solution for the Smart Metering [1]. Moreover, this technology is emerging as a novel data communication method and discussed as an important technology lately due to the developments of the Smart grid systems and Internet of things (IoT). Thus, in this paper, the results obtained from designing and performing implementation scenario for the PLC-based Smart grid home network system were compared and analyzed with that of IEEE 802.11 WLAN MAC (the foundation technology at Jeju Smart grid Test bed)-based Smart grid home network. Thus, in this paper, OPNET 14.5 PL8, OSI 7 layer, PLC router nodes and PLC nodes had been used for the designing and implementation simulations of both systems. Additionally, QoS was not considered in order to guarantee that all the traffics would not have the same processing priority.

• Journal of the Korean Society of Safety
• /
• v.33 no.3
• /
• pp.46-51
• /
• 2018

A basic sprinkler system is a fire extinguishing system that can be easily installed in a fire-vulnerable place such as a publicly used establishments. However, the publicly used establishments are not only complicated in structure, but also have a large amount of flammable interior materials, and the users are not normally in a normal state, which is a very dangerous fire-fighting object. Therefore, due to the low fire extinguishing performance of the basic sprinkler system installed in the publicly used establishments, the fire suppression control can not be performed quickly in case of fire, which may increase the life and property damage. In this study, the cases of quantitative changes of extinguishing water used in basic sprinkler system and the cases of addition of additives such as wetting agents, reinforced agents to improve extinguishing performance were compared. Experimental results showed that the extinguishing performance was improved as the quantity of extinguishing water increase and the reinforced agents showed similar performance to that of 60% increase in the amount of extinguishing water. The cooling time to $200^{\circ}C$ and oxygen concentration were improved up to 14.3% and 34.5%, respectively. In the case of using the wetting agent, the cooling time to $200^{\circ}C$ and oxygen concentration did not show any significant improvement, but showed the effect of preventing deep seated fire. In order to prevent loss of life and property, it is necessary to improve the performance of the basic sprinkler system by increasing amount of extinguishing water or using additives like reinforced agents.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.2
• /
• pp.101-106
• /
• 1999

Open dump of refuse causes groundwater and soil contamination by leachate and air pollution by LFG(Landfill Gas). In this paper, in order to perform a study about reduction of high leachate and LFG collection & control, using a 3-D, 2-phase, transient FDM model, the analysis of simultaneous flow of leachate and LFG has been carried out. In present numerical analysis it is assumed that 58 percents of LFG will evaporate to the ambient air and the recharge rate of a landfill be 12 percent of the average precipitation per year. All other data were excerpted at the point of 1995 when three refuse layers had been buried. From numerical analysis we concluded that maximum head value is approximately 26 mH2O<-에이치투오 (2.52 atm) in the center of the system and that installing venting trench plays an important role in landfill stabilization. Evan with the assumption of three layers constructed and low recharge rate applied, it is found that cumulative leachate and LFG productions will be 15.1 million 세제곱미터, 5.58 billion 세제곱미터, respectively after 40 years.

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.636-640
• /
• 2001

In order to improve the optical Performance of green emitting phosphor for plasma display panel (PDP) application, the wet chemical method for preparing $Zn_{2-x}$ $SiO_4$:xMn (xi=0.02. 0.08) phosphor was designed. The spherical phosphor particles were obtained and the size can be between 0.5$\mu\textrm{m}$ and 2$\mu\textrm{m}$. The formation of phosphor, which had the willemite structure, was completed at relatively low temperature of 108$0^{\circ}C$. Also, photoluminescence Properties of the phosphors prepared were investigated under vacuum ultraviolet excitation. In particular, the emission intensity of Zn$_2$SiO$_4$:0.08Mn phosphor having the 1$\mu\textrm{m}$ of particle size was higher than that of commercial phosphor by 40%. The decay time of zinc silicate powder prepared as containing 8 mole% of manganese has been measured as 7.8ms.

• Tribology and Lubricants
• /
• v.30 no.4
• /
• pp.218-223
• /
• 2014

This paper presents a method of controlling the stiffness of a tungsten probe for an atomic force microscope (AFM) in order to provide high-quality phase contrast images in accordance with sample characteristics. While inducing sufficient deformation on sample surfaces with commercial Si or $Si_3N_4$ probes is difficult because of their low stiffness, a tungsten probe fabricated by electrochemical etching with appropriately high stiffness can generate relatively large elastic deformation without damaging sample surfaces. The fabrication of the tungsten probe involves two separate procedures. The first procedure involves immersing a tungsten wire with both ends bent parallel to the surface of an electrolyte and controlling the stiffness of the tungsten cantilever by decreasing its diameter using electrochemical etching in the direction of the central axis. The second procedure involves immersing the end of the etched tungsten cantilever in the direction perpendicular to the surface of the electrolyte and fabricating a tungsten tip with a tip radius of 20-50 nm via the necking phenomenon. The latter etching process applies pulse waves every 0.25 seconds to the manufactured tip to improve its yield. Finite element analysis (FEA) of the stiffness of the tungsten probe as a function of its diameter showed that the stiffness of the tungsten probes greatly varies from 56 N/m to 3501 N/m according to the cantilever diameters from $30{\mu}m$ to $100{\mu}m$, respectively. Thus, the proposed etching method is effective for producing a tungsten probe having specific stiffness for optimal use with an AFM and certain samples.