• 복식
• /
• 제59권1호
• /
• pp.146-158
• /
• 2009

The purpose of this study was to identify hair salon's implementation strategies and current service condition for mass customization. The questionnaire was composed of 82 questions. 115 hair salon's directors were subjects of this study. The results were as follows: Hair salon's mass customization strategies were categorized into 6 factors such as staff's technique, communication service, electronic products, monetary support, man-to-man service, and dissatisfaction removal service. Hair salons were categorized into 2 groups of a high implementation group and a low implementation group. A high implementation group had a higher monthly sales and more regular customers and staff. The hair salons were franchises and were more spacious in the high group. They were located at fashion street, department store, or outlet mall, and offered fashionable hair styles. However, a low implementation group had a lower monthly sales and less regular customers and staffs. The size of hair salon was small in the low group. They were located in residential areas and offered basic hair styles.

• 한국태양에너지학회 논문집
• /
• 제31권1호
• /
• pp.15-22
• /
• 2011

It is a great interest to convert more energy in the heat source into the power and to improve the efficiency of power generating processes. Since the efficiency of power generating processes becomes poorer as the temperature of the source decreases, to use an ammonia-water mixture instead of water as working fluid is a possible way to improve the efficiency of the system. In this work performance of ammonia-water regenerative Rankine cycle is investigated for the purpose of extracting maximum power from low-temperature waste heat in the form of sensible energy. Special attention is paid to the effect of system parameters such as mass fraction of ammonia and turbine inlet pressure on the characteristics of system. Results show that the power output increases with the mass fraction of ammonia in the mixture, however workable range of the mass fraction becomes narrower as turbine inlet pressure increases and is able to reach 16.5kW per unit mass flow rate of source air at $180^{\circ}C$.

• 천문학회보
• /
• 제44권2호
• /
• pp.63.3-63.3
• /
• 2019

Nearby young moving groups (NYMGs hereafter) are gravitationally unbound loose young stellar associations located within 100 pc of the Sun. Since NYMGs are crucial laboratories for studying low-mass stars and planets, intensive searches for NYMG members have been performed. For identification of NYMG members, various strategies and methods have been applied. As a result, the reliability of the members in terms of membership is not uniform, which means that a careful membership re-assessment is required. In this study, I developed a NYMG membership probability calculation tool based on Bayesian inference (Bayesian Assessment of Moving Groups: BAMG). For the development of the BAMG tool, I constructed ellipsoidal models for nine NYMGs via iterative and self-consistent processes. Using BAMG, memberships of claimed members in the literature (N~2000) were evaluated, and 35 per cent of members were confirmed as bona fide members of NYMGs. Based on the deficiency of low-mass members appeared in mass function using these bona fide members, low mass members from Gaia DR2 are identified. About 2000 new M dwarf and brown dwarf candidate members were identified. Memberships of ~70 members with RV from Gaia were confirmed, and the additional ~20 members were confirmed via spectroscopic observation. Not relying on previous knowledge about the existence of nine NYMGs, unsupervised machine learning analyses were applied to NYMG members. K-means and Agglomerative Clustering algorithms result in similar trends of grouping. As a result, six previously known groups (TWA, beta-Pic, Carina, Argus, AB Doradus, and Volans-Carina) were rediscovered. Three the other known groups are recognized as well; however, they are combined into two new separate groups (ThOr+Columba and TucHor+Columba).

• 한국지역사회생활과학회지
• /
• 제26권4호
• /
• pp.661-673
• /
• 2015

This study examines the effects of a low-calorie raw juice diet on the level of serum ferritin in adults and analyzes nutrient intake from the diet. There were significant differences between juices; the highest calorie was provided by pear juice, highest crude protein, vitamin A, and vitamin B2 levels were from green Juice 1; and highest vitamin C and vitamin B1 levels were from fruit juices. The ratio of estimated energy requirements (EER) for the participants was 56.2% from the raw juice diet. The percentages of recommended intake (RI) from the raw juice diet of protein (57.9%), dietary fiber (19.1%), niacin (6.2%), calcium (0.1%), and magnesium (0.2%) were lower than 75%. However, those of RI of vitamin A, vitamin B1, vitamin B2, vitamin B6, and vitamin C were 1796.5%, 7481.7%, 1915.5%, 30858.7%, and 7500%, respectively, exceeding the tolerable upper intake level (UL) for vitamin A, vitamin B6, and vitamin C. There were significant decreases in weight, the body mass index (BMI), body fat mass, and skeletal muscle mass in males and females. After the diet program, serum iron and SOD (superoxide dismutase) showed significant decreases, whereas RBC, hemoglobin, hematocrit, and serum ferritin showed significant increases. There were negative correlations between serum ferritin and weight and between serum ferritin and skeletal muscle mass for all participants. There were negative correlations between serum ferritin and skeletal muscle mass for males and between serum ferritin and body fat mass for females. These results suggest that a raw juice diet can supplement a regular diet to prevent excess or deficient nutrient intake.

• 한국식품영양과학회지
• /
• 제36권2호
• /
• pp.186-193
• /
• 2007

The prevalence of diabetes has increased to 8% of population. Unlike type 2 diabetes in the western countries, Korean diabetic patients are nonobese and have low serum insulin levels. As the increased prevalence of diabetes and the peculiar characteristics may be related to dietary fat contents, we determined their effects on insulin resistance, insulin secretion and pancreatic $\beta-cell$ mass in 90% pancreatectomized (Px) diabetic rats in the present study. The rats were provided with low fat diet (LF, 10 energy% fat), moderate fat diet (MF, 25 energy% fat) and high fat diet (HF, 40 energy% fat) for 6 months. HF increased body weight and epidydimal fat pads parallel with increased food intake compared to LF and MF. Fasting serum glucose and insulin levels and homeostasis model assessment of insulin resistance were higher in HF, compared to LF and MF, indicating that HF increased insulin resistance. Rats fed LF and MF diets reduced insulin resistance, but only rats fed MF improved pancreatic $\beta-cell$ mass and insulin secretion capacity, measured by hyperglycemic clamp and in situ pancreatic perfusion. LF had low insulin secretion capacity and pancreatic $\beta-cell$ mass, indicating the increased possibility of diabetic prevalence and progression. MF increased $\beta-cell$ mass by stimulating $\beta-cell$ proliferation and neogenesis and reducing $\beta-cell$ apoptosis. In conclusion, MF is effective for the prevention of prevalence and progression of diabetes.

• 한국산업보건학회지
• /
• 제28권3호
• /
• pp.273-282
• /
• 2018

Objectives: Dustiness of nanomaterials is considered as exposure index of essential material. Research on dustiness of nanomaterial is needed to control exposure in workplaces. Method: Dustiness measurement using vortex shaker were installed in the laboratory. Nanomaterials, 1 g, was put in the glass test tube and shaked using vortex shaker. Aerosol dispersed was measured using scanning mobility particle sizer(SMPS) and optical particle counter(OPC). Mass concentration using PVC filter and cassette was measured and TEM grid sampling was conducted. Total particle concentration and size distribution were calculated. Image and chemical composition of particles in the air were observed using transmission electron microscopy and energy dispersive X-ray spectrometer. Eleven different test nanomaterials were used in the study. Results: Rank of mass concentration and particle number concentration were coincided in most cases. Rank of nanomateirals with low concentration were not coincided. Two types of fumed silica had the highest mass concentration and particle number concentration. Indium tin oxide, a mixture of indium oxide and tin oxide, had high mass concentration and particle number concentration. Indium oxide had very low mass concentration and particle number concentration. Agglomeration of nanoparticles in the air were observed in TEM analysis and size distribution. In this study, mass concentration and particle number concentration were coincided and two index can be used together. The range of dustiness in particle number concentration were too wide to measure in one method. Conclusion: Particle number concentration ranged from low concentration to high concentration depend on type of nanomaterial, and varied by preparation and amount of nanomaterial used. Further study is needed to measure dustiness of all nanomaterial as one reference method.

• The Korean Journal of Physiology and Pharmacology
• /
• 제22권4호
• /
• pp.427-436
• /
• 2018

The objective of this study was to analyze the concurrent treatment effects of ursolic acid (UA) and low-intensity treadmill exercise and to confirm the effectiveness of UA as an exercise mimetic to safely improve muscle atrophy-related diseases using Sprague-Dawley (SD) rats with skeletal muscle atrophy. Significant muscle atrophy was induced in male SD rats through hind limb immobilization using casting for 10 days. The muscle atrophy-induced SD rats were group into four: SED, sedentary; UA, daily intraperitoneal UA injection, 5 mg/kg; EX, low-intensity (10-12 m/min, $0^{\circ}$ grade) treadmill exercise; and UEX, daily intraperitoneal UA injection, 5 mg/kg, and low-intensity (10-12 m/min, $0^{\circ}$ grade) treadmill exercise. After 8 weeks of treatment, endurance capacity was analyzed using a treadmill, and tissues were extracted for analysis of visceral fat mass, body weight, muscle mass, expression of muscle atrophy- and hypertrophy-related genes, and endurance capacity. Although the effects of body weight gain control, muscle mass increase, and endurance capacity improvement were inadequate in the UA group, significant results were confirmed in the UEX group. The UEX group had significantly reduced body weight and visceral fat, significantly improved mass of tibialis anterior and gastrocnemius muscles, and significantly decreased atrophy-related gene expression of MuRF1 and atrogin-1, but did not have significant change in hypertrophy-related gene expression of Akt and mTOR. The endurance capacity was significantly improved in the EX and UEX groups. These data suggest that concurrent treatment with low-intensity exercise and UA is effective for atrophy-related physical dysfunctions.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.5-8
• /
• 2006

This study investigates the field application, Songdo the # 1st WORLD, on zero-crack construction of the fundamental mass concrete using double bubble sheets and applying low heat mixture. Experimental results of hydration heat analysis showed that crack modulus of concrete incorporating 20% of blast furnace slag cement was 1.0 in 120 hours, representing 50% probability of crack occurrence, thus requiring additional measures. As for a curing method, a specimen insulating two layers of vinyl chloride+double bubble sheets exhibited only $16.5^{\circ}C$ difference between upper and lower sections, and it also showed favorable workability as well as competitive economic side. Therefore it was determined to use it for curing method in this field. For the curing results of practical field, using 2 layers of vinyl chloride+double bubble sheets and applying low heat mixture on the fundamental mass concrete in 3A residential building exhibited less than only $15^{\circ}C$ difference between surface and center section of that in 5 days elapse and less than $20^{\circ}C$ in 9 days. This means that the crack by hydration heat was prevented, and other fields structures also resisted the plastic shrinkage by insulating the vinyl, sinking crack by second temping, even drying shrinkage by the mixture of low unit water. Therefore the crack on the placement has not been found so far, since the construction was started before 6 month.

• 대한지역사회영양학회지
• /
• 제14권6호
• /
• pp.789-797
• /
• 2009

In order to investigate the effects of frequent eating-out and breakfast skipping of working men on body mass index and nutrients intake status, working male adults aged 20 or over were selected (n = 1883) from the data of 2001 Korea national health and nutrition survey. The subjects were divided into 4 groups according to the eating-out frequency(high: once or more daily, low: less than once daily) and breakfast eating or not. Four groups were high eating-out with breakfast eating (n = 609), high eating-out with breakfast skipping (n = 192), low eating-out with breakfast eating (n = 877), and low eating-out with breakfast skipping (n = 205). High eating-out group showed higher body mass index (BMI) than low eating-out group, but the difference of BMI was disappeared when adjusted with age, residence region and family income. However high eating-out group in case of breakfast eating, compared with the low eating-out, showed higher intakes or densities of energy, fat, fat-energy% and higher ratio of energy-fat overintake, and also showed higher mean nutritional adequacy ratio and lower ratio of nutrients intake deficiency. Calcium, iron, vitamin A and C intakes were not affected by eating-out frequency, but were lowered by breakfast skipping. Breakfast skipping also decreased intake frequency of unprocessed cereals and increased those of ramyon and carbonated and alcoholic beverages. From the results frequent eating-out with breakfast eating caused increased intakes of energy and fat, but did not cause BMI increase. Breakfast skipping, but not eating-out, had negative influences on mineral and vitamin intakes. Accordingly good eating-out as well as breakfast eating should be exceedingly emphasized at nutrition education for the working males.

• Geomechanics and Engineering
• /
• 제29권2호
• /
• pp.113-131
• /
• 2022

A rockburst is a common disaster in deep-tunnel excavation engineering, especially for high-geostress areas. An anomalously low friction effect is one of the most important inducements of rockbursts. To elucidate the correlation between an anomalously low friction effect and a rockburst, we establish a two-dimensional prediction model that considers the discontinuous structure of a rock mass. The degree of freedom of the rotation angle is introduced, thus the motion equations of the blocks under the influence of a transient disturbing force are acquired according to the interactions of the blocks. Based on the two-dimensional discontinuous block model of deep rock mass, a rockburst prediction model is established, and the initiation process of ultra-low friction rockburst is analyzed. In addition, the intensity of a rockburst, including the location, depth, area, and velocity of ejection fragments, can be determined quantitatively using the proposed prediction model. Then, through a specific example, the effects of geomechanical parameters such as the different principal stress ratios, the material properties, a dip of principal stress on the occurrence form and range of rockburst are analyzed. The results indicate that under dynamic disturbance, stress variation on the structural surface in a deep rock mass may directly give rise to a rockburst. The formation of rockburst is characterized by three stages: the appearance of cracks that result from the tension or compression failure of the deformation block, the transformation of strain energy of rock blocks to kinetic energy, and the ejection of some of the free blocks from the surrounding rock mass. Finally, the two-dimensional rockburst prediction model is applied to the construction drainage tunnel project of Jinping II hydropower station. Through the comparison with the field measured rockburst data and UDEC simulation results, it shows that the model in this paper is in good agreement with the actual working conditions, which verifies the accuracy of the model in this paper.