• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.653-659
• /
• 2017

In this study, the complex forging process of an outer support ring was developed and the prototype was manufactured. The current process, hot forging and MCT machining, has a disadvantage of excessive material removal rates and longer machining hours. To overcome this disadvantage, a general shape is given through hot forging and the precision is achieved through cold forging. The complex forging process was developed with the minimal machining process. Forging analysis was carried out to design a forging process using the commercial program, Deform-3D. The hot and cold forging processes were set up based on the analyzed result. The mold and prototype were manufactured. Hardness, surface roughness, internal defect, the grain low line of the prototype were evaluated. The results showed no particular problems, and there were no problems in mass production. Using complex forging, the material was reduced by approximately 27 % compared to the process using hot forging and MCT machining. In addition, the production speed was improved 2.15 fold compared to that of hot forging and MCT machining. Through this study, a cost-effective process and mold design technology were established, which is expected to have positive effects on other related automotive parts production.

• Nutrition Research and Practice
• /
• v.10 no.1
• /
• pp.115-124
• /
• 2016

BACKGROUND/OBJECTIVES: This is the first study to identify common genetic factors associated with the basal metabolic rate (BMR) and body mass index (BMI) in obese Korean women including overweight. This will be a basic study for future research of obese gene-BMR interaction. SUBJECTS/METHODS: The experimental design was 2 by 2 with variables of BMR and BMI. A genome-wide association study (GWAS) of single nucleotide polymorphisms (SNPs) was conducted in the overweight and obesity (BMI > $23kg/m^2$) compared to the normality, and in women with low BMR (< 1426.3 kcal/day) compared to high BMR. A total of 140 SNPs reached formal genome-wide statistical significance in this study (P < $1{\times}10^{-4}$). Surveys to estimate energy intake using 24-h recall method for three days and questionnaires for family history, a medical examination, and physical activities were conducted. RESULTS: We found that two NRG3 gene SNPs in the 10q23.1 chromosomal region were highly associated with BMR (rs10786764; $P=8.0{\times}10^{-7}$, rs1040675; $2.3{\times}10^{-6}$) and BMI (rs10786764; $P=2.5{\times}10^{-5}$, rs10786764; $6.57{\times}10^{-5}$). The other genes related to BMI (HSD52, TMA16, MARCH1, NRG1, NRXN3, and STK4) yielded P < $10{\times}10^{-4}$. Five new loci associated with BMR and BMI, including NRG3, OR8U8, BCL2L2-PABPN1, PABPN1, and SLC22A17 were identified in obese Korean women (P < $1{\times}10^{-4}$). In the questionnaire investigation, significant differences were found in the number of starvation periods per week, family history of stomach cancer, coffee intake, and trial of weight control in each group. CONCLUSION: We discovered several common BMR- and BMI-related genes using GWAS. Although most of these newly established loci were not previously associated with obesity, they may provide new insights into body weight regulation. Our findings of five common genes associated with BMR and BMI in Koreans will serve as a reference for replication and validation of future studies on the metabolic rate.

• Journal of Korean Medicine for Obesity Research
• /
• v.13 no.1
• /
• pp.33-45
• /
• 2013

Objectives: This study was aimed to find out the characteristics of ordinary symptoms between the control and patient groups, diagnosed as overweight or obesity, in Soyang, Taeeum, and Soeum Constitutions and among those 3 groups. Methods: As a prospective cross-sectional study based on medical records, 9213 patients, who visited Kyung Hee University Medical Center from May in 2007 to June in 2010, were included. To diagnose the constitution, Revised Questionnaire for the Sasang Constitution Classification II and examinations by oriental medical doctors who majored in Sasang Constitution Medicine were performed. Based on the World Health Organization criteria for Asian obesity assessment, body mass index (BMI) was classified into 3 groups; more than 25 as obesity, 23 to 25 as overweight, and less than 23 as normal. Ordinary symptoms questionnaire, which consists of 46 questions in 8 categories, were given to the subjects. One-way ANOVA test in continuous variables and chi-square test in categorical variables were carried out to analyze statistical significance. Results and Conclusions: 1) In general characteristics, we could find out the significant differences in age, sex, height, weight, BMI, waist circumference, blood pressure, total cholesterol, triglyceride, low density lipoprotein cholesterol, high density lipoprotein cholesterol, fasting blood sugar, and hemoglobin A1c among the 3 Constitutional groups. 2) Soyang Constitution of overweight and obesity has tendency to have higher appetite, like cool or cold water, defecate more, swear more, dislike heat, and have warmer or hotter extremities in the ordinary symptoms, compared with the control group. 3) Taeeum Constitution of overweight and obesity has tendency to have higher appetite, like cool or cold water, defecate more, swear more, dislike heat, and have warmer or hotter extremities in the ordinary symptoms, compared with the control group. 4) Soeum Constitution of overweight and obesity has tendency to have higher appetite and less fatigue in the ordinary symptoms, compared with the control group. 5) Soeum Constitution showed the slightest increase in appetite, preference about room temperature water, less number of feces, and feeling of chill and warmer extremities in ordinary symptoms, compared with Soyang and Taeeum Constitutions. Taeeum Constitution showed the distinct increase in appetite and sweating in ordinary symptoms, compared with Soyang and Soeum Constitutions.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.3
• /
• pp.10-21
• /
• 2021

Recently, the demand for atypical structures with functions and sculptural beauty is increasing in the construction industry. Existing mold-based structure production methods have many advantages, but building complex atypical structures represents limitations due to the cost and technical characteristics. Production methods using molding are suitable for mass production systems, but production cost, construction period, construction cost, and environmental pollution can occur in small quantity batch production. The recent trend in the construction industry calls for new construction methods of customized small quantity batch production methods that can produce various types of sophisticated structures. In addition to the economic effects of developing related technologies of 3D Concrete Printers (3DCP), it can enhance national image through the image of future technology, the international status of the construction civil engineering industry, self-reliance, and technology export. Until now, 3DCP technology has been carried out in producing and utilizing residential houses, structures, etc., on land or manufacturing on land and installing them underwater. The final purpose of this research project is to produce marine structures by directly printing various marine structures underwater with 3DCP equipment. Compared to current underwater structure construction techniques, constructing structures directly underwater using 3DCP equipment has the following advantages: 1) cost reduction effects: 2) reduction of construct time, 3) ease of manufacturing amorphous underwater structures, 4) disaster prevention effects. The core element technology of the 3DCP equipment is to extrude the transferred composite materials at a constant quantitative speed and control the printing flow of the materials smoothly while printing the output. In this study, the extruding module of the 3DCP equipment operates underwater while developing an extruding module that can control the printing flow of the material while extruding it at a constant quantitative speed and minimizing the external force that can occur during underwater printing. The research on the development of 3DCP equipment for printing concrete structures underwater and the preliminary experiment of printing concrete structures using high viscosity low-flow concrete composite materials is explained.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.3
• /
• pp.236-245
• /
• 2021

It is very important for structure designer to understand the service life variation since a wide range of service life is evaluated with changing exposure conditions and design parameters. Recently, for zero-carbon, waste plastic has been used for fuel for clinker production and this yields increase in chloride content in cement. This study is for evaluation of changing service life in the concrete with increasing initial chloride content due to usage of plastic-SRF(Solid Refuse Fuel) considering various exposure conditions and design parameters. For this, 4 levels of initial chloride content were assumed, and the service life was assessed using LIFE 365 program considering various environmental conditions including 3 levels of surface chloride content. As for analysis parameters, critical/initial chloride content, blast furnace slag powder replacement ratio, W/B(Water to Binder) ratio, cover depth, and unit mass for binder are adopted. Service life decreases with increasing initial chloride content and a significant reduction of service life is not evaluated permitting up to 1,000ppm of initial chloride content. With increasing slag replacement ratio, a longer service life can be secured since blast furnace slag powder has the effect of reducing the diffusion of external chloride ions and fixing the free chloride. It is thought that increasing initial chloride content up to European standard is helpful for enhancing sustainability and reducing carbon emission. Though the reduction in service life due to an increase in the initial chloride content is not significant in slag-concrete with low surface chloride content, careful consideration for mixing design should be paid for the exposure environment with high surface chloride content.

• Atmosphere
• /
• v.31 no.3
• /
• pp.267-282
• /
• 2021

Characteristics of carbonaceous components and organic compounds in PM_2.5 over the atmosphere of the Yellow Sea were investigated. PM_2.5 samples were collected onboard the meteorological research vessel, GISANG 1, over the Yellow Sea during the YES-AQ campaign in 2018 and 2019, respectively. The average concentrations of carbonaceous components in this region were 2.59 ± 1.59 ㎍ m^-3 for the OC, 0.24 ± 0.10 ㎍ m^-3 for the EC, 2.14 ± 1.30 ㎍ m^-3 for the WSOC and 1.17 ± 0.94 ㎍ m^-3 for the HULIS-C, respectively. The total concentration of 56 organic compounds (ΣOCs) accounts for 10% of OC. The main group among organic compounds were dicarboxylic acids which account for 57% of ΣOCs, followed by n-alkanoic acids accounting for 34% of ΣOCs. In n-alkanoic acid distribution, hexanoic (C_6:0) and octanoic (C_8:0) acids which are low molecular weight n-alkanoic acids and known as emitted from marine biogenic activities were dominant in this region. Furthermore, non-HULIS-C fraction increased when the air mass originated from the marine region rather than the continental region. When the Asian dust episode was observed, the WISOC concentrations along with the levoglucosan were increased, while the haze episodes caused the increase of WSOC, HULIC-S and DCAs. In this study, we found that the components of carbonaceous and organic aerosols in PM_2.5 over the Yellow Sea were changed with the specific air pollution episodes. It indicates that the physicochemical properties of PM_2.5 can be changed by the air pollution episodes in this region.

• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2860-2866
• /
• 2020

Oxide dispersion-strengthened materials W-1wt%Pr₂O₃ and W-1wt%La₂O₃ were synthesized by wet chemical method and spark plasma sintering. The field emission scanning electron microscopy (FE-SEM) analysis, XRD and Vickers microhardness measurements were conducted to characterize the samples. The irradiations were carried out with a 5 keV helium ion beam to fluences up to 5.0 × 10²¹ ions/m² under 600 ℃ using the low-energy ion irradiation system. Transmission electron microscopy (TEM) study was performed to investigate the microstructural evolution in W-1wt%Pr₂O₃ and W-1wt%La₂O₃. At 1.0 × 10²⁰ He⁺/m², the average loops size of the W-1wt%Pr₂O₃ was 4.3 nm, much lower than W-1wt% La₂O₃ of 8.5 nm. However, helium bubbles were not observed throughout in both doped W materials. The effects of pre-irradiation with 1.0 × 10²¹ He⁺/m² on trapping of injected deuterium in doped W was studied by thermal desorption spectrometry (TDS) technique using quadrupole mass spectrometer. Compared with the samples without He⁺ pre-irradiation, deuterium (D) retention of doped W materials increased after He⁺ irradiation, whose retention was unsaturated at the damage level of 1.0 × 10²²D₂⁺/m². The present results implied that irradiation effect of He⁺ ions must be taken into account to evaluate the deuterium retention in fusion material applications.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.465-474
• /
• 2021

This study investigated knowledge about the human papillomavirus (HPV), attitudes toward HPV vaccination, and intention to receive HPV vaccination among marriage-immigrant women, and identified factors associated with intention to receive HPV vaccination. The subjects of this study were 136 marriage-immigrant women in J Province. Data were collected from September 28 to December 21, 2017, and analyzed using SPSS for Windows version 24.0. The participants' knowledge of HPV was low (mean score, 2.74) and their attitude towards HPV vaccination was positive (mean score, 36.66). The factors affecting the intention to take the HPV vaccination included Vietnamese nationality (odds ratio [OR]=2.899, p=.048), desire for education about the HPV vaccine (OR=5.967, p<.001), and a positive attitude towards HPV vaccination (OR=1.083, p=.034). Therefore, educational programs about HPV vaccination targeting marriage-immigrant women are needed. It is also necessary to provide accurate information about the HPV vaccination using various methods, at health care facilities and through mass media.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.2
• /
• pp.134-140
• /
• 2019

A feeding trial was conducted to investigate the effects of dietary fish meal replacement by a blend of lysine cell mass, corn protein concentrate and poultry by-product meal on the growth and blood chemistry of the starry flounder Platichthys stellatus. The fish meal replacer (FMR) was prepared to have the same level of protein as fish meal (FM). With a commercial diet as a positive control, five experimental diets (basal, FM42, FM32, FM22 and FM12) were formulated to contain 52% protein and 10% lipid. The dietary FM levels decreased from 52% (basal) to 42, 32, 22 and 12% with concomitant increase in the FMR to 10, 20, 30, 40 and 50%, respectively. Juvenile starry flounder with an average body weight of 177.3 g were randomly distributed in each (30 fish/tank) of 18 plastic tanks ($139{\times}99{\times}54cm$). After a 45-day feeding trial, the survival rate ranged from 95.6% (FM22) to 100% (control and FM42), while the weight gain of the fish groups varied from 49.7 to 58.4 g. The results clearly revealed that starry flounder can grow well on a diet containing low FM (12%) with a high level of FMR (50%) without any adverse effects.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.118-123
• /
• 2019

In this study, the electrochemical characteristics of Graphite/Silicon/Pitch anode composites were analyzed to improve the low theoretical capacity of graphite as a lithium ion battery. The Graphite/Silica composites were synthesized by bonding silica onto polyvinylpyrrolidone coated graphite. The surface of used silica was treated with (3-Aminopropyl)triethoxysilane(APTES). Graphite/Silicon/Pitch composites were prepared by carbonization of petroleum pitch, the fabrication processes including the magnesiothermic reduction of nano silica to obtain silicon and varying the mass ratio of silica. The Graphite/Silicon/Pitch composites were analysed by XRD, SEM and XRD. Also the electrochemical performances of Graphite/Silicon/Pitch composite as the anode of lithium ion battery were investigated by constant current charge/discharge, rate performance, cyclic voltammetry and electrochemical impedance tests in the electrolyte of $LiPF_6$ dissolved in organic solvents (EC:DMC:EMC=1:1:1 vol%). The Graphite/Silicon/Pitch anode composite (silica 28.5 in weight) has better capacity (537 mAh/g). The cycle performance has an excellent capacity retention to 30th cycle of 95% and the retention rate capability of 98% in 0.1 C/0.2 C.