• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.4
• /
• pp.192-202
• /
• 1998

We investigated the geochemistry and environmental isotopes of granite-bedrock groundwater in the Yeongcheon diversion tunnel which is located about 300 m below the land surface. The hydrochemistry of groundwaters belongs to the Ca-HCO$_3$type, and is controlled by flow systems and water-rock interaction in the flow conduits (fractures). The deuterium and oxygen-18 data are clustered along the meteoric water line, indicating that the groundwater are commonly of meteoric water origin and are not affected by secondary isotope effects such as evaporation and isotope exchange. Tritium data show that the groundwaters were mostly recharged before pre-thermonuclear period and have been mixed with younger surface water flowing down rapidly into the tunnel along fractured zones. Based on the mass balance and reaction simulation approaches, using both the hydrochemistry of groundwater and the secondary mineralogy of fracture-filling materials, we have modeled the low-temperature hydrogeochemical evolution of groundwater in the area. The results of geochemical simulation show that the concentrations of Ca$\^$2＋/, Na$\^$＋/ and HCO$_3$and pH of waters increase progressively owing to the dissolution of reactive minerals in flow paths. The concentrations of Mg$\^$2＋/ and K$\^$＋/ frist increase with the dissolution, but later decrease when montmorillonite and illitic material are precipitated respectively. The continuous adding of reactive minerals, namely the progressively larger degrees of water/rock interaction, causes the formation of secondary minerals with the following sequence: first hematite, then gibbsite, then kaolinite, then montmorillonite, then illtic material, and finally microcline. During the simulation all the gibbsite is consumed, kaolinite precipitates and then the continuous reaction converts the kaolinite to montmorillonite and illitic material. The reaction simulation results agree well with the observed, water chemistry and secondary mineralogy, indicating the successful applicability of this simulation technique to delineate the complex hydrogeochemistry of bedrock groundwaters.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.1
• /
• pp.45-53
• /
• 2009

More than 40% of railway bridges on the conventional lines in Korea consist of track-on-steel plate girder (TOSPG) bridges. This type of bridge is typically designed without considering seismic loadings, as most of them were built before 1970. The seismic performance of this particular type of bridge could be upgraded through various seismic retrofit schemes, and seismic risk assessment could play a key role in decision-making on the level of the seismic retrofit. This study performed a seismic risk assessment of TOSPG bridges in Korea. The seismic damage of several crucial components of TOSPG bridges--fixed bearings, free bearings, and piers--were probabilistically estimated, and their seismic fragility curves were developed. The probability that the components would exceed their predefined limit states was also calculated by combining the fragility curves and the seismic hazard function. The analysis showed that the piers of TOSPG bridges, which are made of plain concrete without rebars, have relatively low risk against seismic loadings in Korea. This is because the mass of the superstructures of TOSPG bridges is relatively small, and hence, the seismic loading being transferred to the piers is minimal. The line-type bearings typically used for TOSPG bridges, however, are exposed to a degree of seismic risk. Among the bearings, the probability of the free-end bearings and the fixed-end bearings exceeding the slight damage state in 50 years was found to be 12.78% and 4.23%, respectively. The gap between these probability values lessened towards more serious damage states. This study could effectively provide an engineering background for decision-making activities on the seismic retrofit of railway bridges.

• Parasites, Hosts and Diseases
• /
• v.26 no.4
• /
• pp.255-262
• /
• 1988

An epidemiological study on brugian filariasis was carried out in endemic areas including Cheju Island in Korea, with a brief review of literatures. The results showed that the incidence among residents has remarkably decreased in Cheju Island, which was the main endemic area. Reviewing available informations on the prevalence of filariasis reported in recent years and also judging from the present socio·economic conditions which enable people to practice personal protection against mosquitos, it can be said with confidence that alariasis has almost disappeared from Cheju Island and inland areas. The disease is considered to remain at a low level of endemicity in Hugsan Islands. Certainly mass diethylcarbamasine (DEC) treatment carried out in Cheju Island in the 1960s and 1970s and remarkable economic growth followed by improved living standard and altered life-style of inhabitants could all have combined effects on the disappearance of this mosquito-borne disease in this island. If the present trends go on, the possibility of resurgence of filariasis in Cheju Island is hardly postulated.

• Korean Journal of Medicinal Crop Science
• /
• v.5 no.1
• /
• pp.49-55
• /
• 1997

This study was conducted to establish mass propagation system from the tissue culture using immature embryos in Eleutherococcus senticosus. Immature embryos from seeds were removed under the microscope and placed on MS, $MSB_5\;and\;B_5$ medium containing several plant growth regulators. While the calli were well formed on media containing 2 mg/l of 2, 4-D, 2 mg/l of 2, 4-D and 0.7 mg/l of TDZ, shoot regeneration was better on MS medium with combinations of high concentrations of TDZ and low concentrations of 2, 4-D. Treatment of 2, 4-D alone was better than treatment of TDZ alone in callus induction, but plant regeneration was reversed. The results of callus formation and shoot regeneration on $MSB_5\;and\;B_5$ media were similar to those of MS media. The rate of callus formation was nearly 100% when 2, 4-D was added to $B_5$, medium on concentration of 2 mg/l or 0.7 mg/l. TDZ showed very significant effect on the formation of multiple shoots.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.157-166
• /
• 2020

The city of Suwon has introduced a dockless bike for the first time in Korea. In this study, a questionnaire was conducted for citizens to suggest improvement through satisfaction analysis. As a result of the survey, 88 % of respondents awarded the presence of a bike, and 90 % answered positively in terms of bike policy; whereas mature civic ethics showed an low satisfaction. For the purpose of usage, approximately 75 % of users mainly used for commuting, business, shopping, and the connection with mass transit. In the result of the primary means of a trip, a private car was most preferred before operation; However, it was found that mode transition has been actively carried out. This suggests significant implications for implementing sustainable urbanism. Meanwhile, The level of satisfaction significantly differed in the field of payment method, charge, usage guidance and publicity by an occupation and age groups commonly. Satisfaction in bike maintenance was statistically differed by an occupation. Satisfaction in Rental-return and registration procedures showed differences by an age groups. The results of this study will contribute to establishment related policies and to more activate dockless shared bike.

• Membrane Journal
• /
• v.27 no.2
• /
• pp.154-166
• /
• 2017

Polymeric films for gas barrier applications such as food packaging and electronic devices have attracted great interest due to their cheap, light and easy processability among gas barrier materials. Especially in electronic devices, extremely low gas permeance is necessary for maintaining the device performance. However, current polymeric barrier films still suffer from relatively high gas permeance than other materials. Therefore, there have been strong needs to enhance the gas barrier performance of polymeric barrier films while keep their own advantages. Recently, graphene is highlighted as a 2D-layered material for gas barrier applications. However, owing to the poor workability and difficulty to produce in engineering scale, graphene oxide (GO) is on the rise. GO consists of oxygen-containing functional groups on surface with intrinsic 2D-layered structure and high aspect ratio, and it can be well-dispersed in aqueous polar solvents like water, resulting in scalable mass production. Here, we prepared GO incorporated polyimide (PI) nanocomposites. PI is widely used barrier polymer with high mechanical strength and thermal and chemical stability. We demonstrated that PI/GO nanocomposites could perform as a gas barrier. Furthermore, surfactants (Triton X-100 (TX) and Sodium deoxycholate (SDC)) are introduced to enhance the gas barrier performance by improving the degree of dispersion of GO in PI matrix. As a result, TX enhanced the gas barrier performance of PI/GO nanocomposites which is similar to predicted value. This finding will provide new insight to polymer nanocomposites for gas barrier applications.

• Korean Journal of Community Nutrition
• /
• v.23 no.4
• /
• pp.289-301
• /
• 2018

Objectives: The aim of this study was to examine the current status of consumption of energy drinks among college students and investigate the effects of general environmental factors, health behavior factors, caffeine knowledge levels, and perceived stress levels on consumption of energy drinks. Methods: A survey was conducted among a total of 479 college students in Gwangju, using self-administered questionnaires. The questionnaire consisted of items about general environmental factors, health behavior, caffeine knowledge, perceived stress, and energy drink consumption behaviors. Results: 69.1% of participants experienced consumption of energy drinks, and specifically 82.8% of male students and 54.1% of female students experienced consumption of energy drinks (p<0.001). The reasons for drinking energy drinks were found to be recovery from fatigue, curiosity, taste, habit, thirst relief, and stress relief. In addition, 40.7% of participants experienced drinking energy drinks mixed with alcohol, and specifically 48.6% of male students and 27.4% of female students reported drinking energy drinks with alcohol (p<0.001). Moreover, 51.5% of participants responded that they experienced the effects of energy drinks, 31.9% reported experiencing adverse effects, and 41.1% were found to perceive the health risks. As a result of the assessment of caffeine knowledge, the participants showed a high level of knowledge of the arousal effect (77.7%) and the concentration increasing effect (70.8%) of caffeine, whereas they exhibited a low level of understanding of the health problems due to caffeine (32.6%) and adequate caffeine intake levels (24.4%). The higher levels of consumption experience of energy drinks was associated with higher body mass indexes (BMI) (p<0.01), higher academic years (p<0.01), lower levels of interest in health (p<0.05), smoking (p<0.001), alcohol consumption (p<0.05), and higher levels of perceived stress (p<0.05). Conclusions: The risk groups related to consumption of energy drinks among college students were identified as male students rather than female students, students in the third or fourth year of study associated with increased stress levels, and students with negative health behaviors. Therefore, support for diverse health and nutrition education for college students is required along with the improvement of internal and external environments of schools in order for college students to manage increased stress levels due to the schoolwork and preparation for employment and maintain positive health behaviors.

• Economic and Environmental Geology
• /
• v.49 no.4
• /
• pp.269-280
• /
• 2016

I presented three vector crustal magnetic anomaly components and six gradients by using spherical Slepian functions over the cap area of $20^{\circ}$ of radius centered on the South Pole. The Swarm mission, launched by European Space Agency(ESA) in November of 2013, was planned to put three satellites into the low-Earth orbits, two in parallel in East-West direction and one in cross-over of the higher altitude. This orbit configuration will make the gradient measurements possible in North-South direction, vertical direction, as well as E-W direction. The gravity satellites, such as GRACE and GOCE, have already implemented their gradient measurements for recovering the accurate gravity of the Earth and its temporal variation due to mass changes on the subsurface. However, the magnetic gradients have little been applied since Swarm launched. A localized magnetic modeling method is useful in taking an account for a region where data availability was limited or of interest was special. In particular, computation to get the localized solutions is much more efficient and it has an advantage of presenting high frequency anomaly features with numbers of solutions fewer than the global ones. Besides, these localized basis functions that were done by a linear transformation of the spherical harmonic functions, are orthogonal so that they can be used for power spectrum analysis by transforming the global spherical harmonic coefficients. I anticipate in scientific and technical progress in the localized modeling with the gradient measurements from Swarm and here will do discussion on the results of the localized solution to represent the three vector and six gradient anomalies over the Antarctic area from the synthetic data derived from a global solution of the spherical harmonics for the crustal magnetic anomalies of Swarm measurements.

• Ecology and Resilient Infrastructure
• /
• v.2 no.1
• /
• pp.64-79
• /
• 2015

We investigated the tidal current, hydrographic data, and benthic environment of major sea cucumber (Holothuroidea, de Blainville, 1834) habitats in Baengnyeongdo, Jindo and Uljin to understand the optimal environmental or ecological habitat for sea cucumbers. The three study areas were characterized by a cold-water mass of temperatures ranging $12{\sim}18^{\circ}C$, with an active circulation between the surface and deep waters. According to an analysis of the tidal current map, a strong flow velocity of $100{\sim}120cm\;s^{-1}$ appeared in Baengnyeongdo and Jindo. The three sea cucumber habitats showed the common characters of a bottom sediment composed of sand-silt, a diverse seaweed colony and benthic organisms, and boulders and rocks which provide a hideout for the organisms. We aimed to draw the optimal habitat condition for sea cucumbers in Korea, and the result showed that the low water temperature, rapid water flow, active vertical mixing between surface and deep waters, bottom composed by sand-silt, large rocks, and diverse seaweed colony and benthic organism were important factors. The optimal habitat for Juvenile sea cucumbers was the intertidal areas characterized by a muddy bottom, reef, and seaweed. The optimal habitat for adult sea cucumbers was characterized by a place where sand and mud are mixed, and the body size of the sea cucumber was proportional to water depth, and the relatively large boulders and rocks compared to the intertidal area.

• Applied Chemistry for Engineering
• /
• v.19 no.2
• /
• pp.173-178
• /
• 2008

Calcium lactate was prepared by reacting lactic acid with precipitated calcium carbonate (PCC) which was prepared by carbonation process (calcite) and solution process (aragonite). Effects of PCC morphology (calcite and aragonite) on calcium lactate by the solution process were investigated experimentally. Despite the slow forming rate at the initial stage, the final yield of calcium lactate appeared higher when calcite was used. Therefore, the maximum yield of calcium lactate using aragonite was 85.0% and that using calcite was 88.7%, respectively. For both cases, the optimum temperature for the preparation appeared at around $60^{\circ}C$. Furthermore, the increase in lactic acid concentration over 2.0 mol% increased slurry viscosity and deteriorated mass transfer, which resulted in low yield of calcium lactate for both cases. SEM analyses showed that the prepared calcium lactate appeared as plate-like crystal form, irrespective of PCC morphologies, reaction temperatures, and concentrations of lactic acid.