• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1853-1859
• /
• 2008

IGBT modules are designed for low loss, rugged for all environments and user friendly. Low on state saturation voltage with high switching speed is the primary concerns. In this paper selection of IGBT, module ratings and characteristics are discussed. The IGBT design topic of protection against over voltage and over current are covered. Emphasis on turn off switching, short circuit switching and necessary precautions are dealt. Selection of IGBT device, gate drive power, and its lay out considerations are covered in detail.

• ETRI Journal
• /
• 제32권4호
• /
• pp.603-606
• /
• 2010

In this letter, we propose a channel estimation algorithm based on incremental pilots. These are pilots additionally inserted after puncturing the modulated orthogonal frequency division multiplexing (OFDM) symbols to enhance channel estimation performance without lowering bandwidth efficiency. A low-density parity-check code puncturing scheme is also proposed to prevent the performance degradation due to the codeword bit loss caused by punctured OFDM symbols.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권7호
• /
• pp.458-461
• /
• 2005

Power dissipated during test application is substantially higher than power dissipated during functional operation which can decrease the reliability and lead to yield loss. This paper presents a new technique for power minimization during test application in full scan sequential circuits. This paper shows freezing of combinational logic parts during scan shift operation in test mode. The freezing technique leads to power to minimization. Significant power reduction in the scan techniques is achieved on ISCAS 89 benchmarks.

• 기술사
• /
• 제44권4호
• /
• pp.39-43
• /
• 2011

To cope with recent high gas prices and global warming phenomenon, the latest gasoline engine technologies are focusing on direction injection, downsizing by turbo charging, variable compression ratio, controlled auto Ignition to enhance fuel efficiency and satisfy emission regulations. The variable valve train technology will be a basement for these innovative technologies in internal combustion engines and is supposed to play a key role to improve low thermal efficiency and pumping loss in gasoline engine caused by low compression ratio and throttled operation respectively.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.329-330
• /
• 2015

This paper introduces a low-frequency switching method for the neutral line of TNPC inverters to achieve high efficiency. By applying the method, the switching loss in the neutral line is reduced. In order to compensate the current distortion near zero-crossing points, the partial switching strategy is applied. Both the simulation and the experimental results verify the usefulness of the proposed method.

• ETRI Journal
• /
• 제38권4호
• /
• pp.654-664
• /
• 2016

This paper presents a transformer-based reconfigurable synchronous boost converter. The lowest maximum power point tracking (MPPT)-input voltage and peak efficiency of the proposed boost converter, 20 mV and 88%, respectively, were achieved using a reconfigurable synchronous structure, static power loss minimization design, and efficiency boost mode change (EBMC) method. The proposed reconfigurable synchronous structure for high efficiency enables both a transformer-based self-startup mode (TSM) and an inductor-based MPPT mode (IMM) with a power PMOS switch instead of a diode. In addition, a static power loss minimization design, which was developed to reduce the leakage current of the native switch and quiescent current of the control blocks, enables a low input operation voltage. Furthermore, the proposed EBMC method is able to change the TSM into IMM with no additional time or energy loss. A prototype chip was implemented using a $0.18-{\mu}m$ CMOS process, and operates within an input voltage range of 9 mV to 1 V, and an output voltage range of 1 V to 3.3 V, and provides a maximum output power of 37 mW.

• Journal of Dairy Science and Biotechnology
• /
• 제33권3호
• /
• pp.223-229
• /
• 2015

Milk is a food with high nutritional value as it contains abundant water, proteins, vitamins, lactose, fat, minerals, enzymes, etc. However, in order to make milk suitable for intake, it should be thermally treated to eliminate microbiologically hazardous factors. Heat treatment is an essential sanitation process for milk, but various precautions must be taken in order to process and preserve it. Therefore, various techniques should be developed to minimize the nutrient loss and to ensure that milk is safe for consumption, conservation, and distribution. However, the existing thermal pasteurization methods are harmful and increase the nutrient loss; moreover, no new thermal pasteurization methods are being researched that are safe for the human health and minimize the nutrient loss. Hence, this study aims to review new processes for thermal (low temperatures) and no thermal pasteurization methods that can minimize the nutrient loss during milk pasteurization.

• 전력전자학회논문지
• /
• 제4권2호
• /
• pp.152-158
• /
• 1999

IGBT는 전압정격 및 전류정격이 높고 도통손실이 낮아서 스위칭 전원장치에 많이 쓰이고 있는 추세에 있다. 그러나 IGBT는 MOSFET에 비해 스위칭 특성이 좋지 않아서 스위칭 손실이 많이 발생하며 주파수에도 제한을 받는다. 본 논문에서는 IGBT와 MOSFET의 장점을 살리기 위하여 IGBT에 MOSFET를 병렬로 접속한 IGBT-MOSFET 병렬 스위치를 사용한 2.4kW, 48V 출력의 고효율 반브리지 직류-직류 변환기를 제안한다. 병렬 스위치에서 주 스위칭 소자인 IGBT는 도통구간에서 주된 역할을 하며 MOSFET는 스위칭시에 주된 역할을 한다. 스위칭 손실을 분석하기 위하여 선형화 모델을 사용하였으며 시뮬레이션을 통하여 변환기의 동작을 확인하였다.

• Journal of electromagnetic engineering and science
• /
• 제10권3호
• /
• pp.104-116
• /
• 2010

With several advantages such as flexible downlink-to-uplink(DL-to-UL) ratio and flexible spectrum usage, Time Division Duplexing(TDD) is emerging as an alternate to Frequency Division Duplexing(FDD), especially in wireless broadband systems. We already have at least four different TDD systems in the industry: Time Division-Synchronous Code Division Multiple Access(TD-SCDMA), IEEE 802.16e-TDD, IEEE 802.16m-TDD, and Time Division-Long Term Evolution(TD-LTE). A disadvantage of TDD is that tight coordination such as time synchronization between adjacent operators is required to prevent interference between the adjacent TDD systems. In this paper, we investigate coexistence scenarios among the above four well-known TDD systems and calculate spectral efficiency(SE) loss in each scenario. Our findings are that SE loss can be significant if TDD ratios of the adjacent operators are considerably different. However, as long as the TDD ratios of the adjacent operators are similar, configurations in the systems permit perfect time synchronization between the two heterogeneous TDD systems, and the resulting SE loss is zero or reasonably low. We believe that the above findings and the configurations of the TDD systems recommended tominimize SE loss will be helpful for operators who deploy TDD systems in system parameter determination and cross-operator coordination.

• Preventive Nutrition and Food Science
• /
• 제8권3호
• /
• pp.230-234
• /
• 2003

Mass transfer characteristics during osmotic dehydration of carrots were studied as functions of immersion temperature and time, and sugar and salt concentrations. The effect of osmotic dehydration on the degree of browning of air-dried carrots was also evaluated. Increasing the immersion temperature and time, sugar concentration, and salt addition increased water loss, sugar gain, molality and rate of dehydration. The water loss and increases in solids, and molality were rapid in the beginning of the process and then increased slowly during remainder of the process. Increasing 1 or 2% salt concentration in the 40$^{\circ}$Brix sugar solution at 6$0^{\circ}C$ increased water loss and solid gain. Salt addition was not able to significantly affected on water loss and solid gain compare to temperature (40～8$0^{\circ}C$) and sugar concentration (20～60$^{\circ}$Brix) changes due to the low salt concentration. A minimum degree of browning of the air-dried carrots (O.D. = 0.048) could be achieved using binary solutions (40$^{\circ}$Brix sugar solution with 2% salt addition) with 24 min of immersion time compared to control (O.D. = 1.308) or blanching with 24 min of immersion time (O.D. = 0.174).