• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.1
• /
• pp.1-7
• /
• 2023

We studied the changes in growth characteristics of major cultivated rice in low- density transplanting. The culm and spikelet length did not change in low density transplanting conditions. As the distance between hills increased by 10 cm, the number of tillers per hill increased by an average of 4.4 and the number of grains per spikelet increased by 7.5. The cultivar that had more tillers and higher grain number in 80 hills per 3.3 m² tended to have more tillers and grain in low-density transplanting conditions. However, the increase rate of tillers and grain in low-density transplanting was not significanty different from the tiller and grain number in 80 hills per 3.3 m². The total branch number and branch length in spikelets increased in low-density transplanting conditions. The grain number per spikelet was also increased by the in low-density transplanting method.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.235.2-235.2
• /
• 2014

Plasma hardly grows in low pressure because of lack of collision. Especially, in extremely low pressure like 1 mTorr, the experiment scale is far larger than mean free path therefore plasma is hardly generated in such low pressure. But low pressure plasma has useful properties like low damage or fine sputtering process because it has typically low electron density. In here, thermal electron is used to make breakdown in low pressure easily and cylindrical geometry is used to help discharge easily. And we changed magnetic field strength to control electron density or temperature. In low pressure, density and temperature behavior is very interesting so its characteristics are examined here.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.605-609
• /
• 2001

Low density ceramic supporter was prepared by using fly ash as a starting material for the application to the biological aerated filter (BAF) system, and the effect of additives and sintering atmosphere on the apparent and bulk density of the carrier was examined. Borax, Na$_2$O and glass powders were added to produce liquid phase. The density of the supporter decreased as the amount of borax increased. The bulk density of 0.79 g/㎤ and the apparent density of 1.10 g/㎤ were obtained when the fly ash with 15% of borax was sintered at 116$0^{\circ}C$ for 15 minutes. The density also decreased as the plate glass powders past through 22${\mu}{\textrm}{m}$ size were mixed. When the fly ash with 12% of grass powder was sintered at 128$0^{\circ}C$ for 10 minutes, the bulk and apparent density were 0.90g/㎤ and 1.00 g/㎤, respectively. Apparent density of 1.6~1.8g/㎤ was obtained when the fly ash was sintered at 120$0^{\circ}C$ in a weak reducing atmosphere. By maintaining the reducing atmosphere and sintering at a high heating rate, the liquid phase was farmed from the reduced composition of fly ash. This resulted in the formation of closed pores that enabled the low apparent density.

• Food Science of Animal Resources
• /
• v.24 no.3
• /
• pp.209-215
• /
• 2004

In a trial involving 120 pigs, the growth performance of finishing pigs and proximate composition, physicochemical properites and fatty acid composition of loin muscle were investigated by feeding the high-energy density diet and low-energy density diet. The treatments included feeding 1) the low-energy density diet (3,290 cal/kg DE, 14.50% CP, 0.70% lysine and 0.78% Ca) for 38 days and 2) the hight-energy density diet (3,350 cal/kg ME, 15.0% CP, 0.70% lysine and 0.78% Ca) for 27 days. The average daily gains were significantly higher for pigs fed the high-energy density diet than those fed the low-energy density diet, but average daily feed intake and feed conversion rate were significantly lower than those fed the low-energy density diet (p<0.05). The cooking loss and yellowness of pork were significantly (p<0.05) lower for pigs fed the low-energy density diet than those fed the high-energy density diet. There were no significant differences in carcass characteristics, proximate composition and fatty acid composition of pork. In conclusion, the results of the experiment suggested that the high-energy density diet for pigs tended to improve the growth performance, but the cooking loss and yellowness of pork were higher for pigs fed the high-energy density diet than those fed the low-energy density diet.

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.3
• /
• pp.6-12
• /
• 2019

Extended Drude model has been used to obtain information of correlations from measured optical spectra of strongly correlated electron systems. The optical self-energy can be defined by the extended Drude model formalism. One can extract the optical self-energy and the electron-boson spectral density function from measured reflectance spectra using a well-developed usual process, which is consistent with several steps including the extended Drude model and generalized Allen's formulas. Here we used a reverse process of the usual process to investigate the extended Drude analysis when an additional low-energy interband transition is included. We considered two typical electron-boson spectral density model functions for two different (normal and d-wave superconducting) material states. Our results show that the low-energy interband transition might give significant effects on the electron-boson spectral density function obtained using the usual process. However, we expect that the low-energy interband transition can be removed from measured spectra in a proper way if the transition is well-defined or well-known.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.10 s.241
• /
• pp.1111-1118
• /
• 2005

In this study, a unified numerical investigation has been performed on the evolution of weld pool and key-hole geometry during low-power and high-power density laser welding. Unsteady phase-change heat transfer and fluid flow with the surface tension are examined. The one-dimensional vaporization model is introduced to model the overheated surface temperature and recoil pressure during high-power density laser welding. It is shown that Marangoni convection in the weld pool is dominant at low-power density laser welding, and the keyhole with thin liquid layer and the hump are visible at high-power density laser welding. It is also shown that the transition from conduction welding to penetration welding fur iron plate exists when the laser power density is about $10^6W/Cm^2$.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.47.1-47.1
• /
• 2014

We examine the effect of environment on star formation activity of a sample of galaxy group catalogue given in Tempel et al.(2012) constructed from the Sloan Digital Sky Survey Data Release 8. In order to compare galaxies in different environment, we classify galaxies into two groups: galaxies in low density environment and galaxies in high density environment. After matching colors and apparent magnitudes of the galaxies, we are left with 5912 galaxies in each of the environment category. The fraction of star-forming galaxies in low-density environment is ~34%, higher than ~15% in high-density environment. Star-forming galaxies in low density environment have a higher average SFR value than those in high density environment. The bulge-to-disk ratio for galaxies in two different environment shows bimodal distribution. Regardless of the environment, we find galaxies with high star formation rate despite their red (g-r) color, for which the origin enhancing their star formation rate is investigated.

• Fire Science and Engineering
• /
• v.29 no.4
• /
• pp.81-88
• /
• 2015

A low-cost device using the light-extinction method was developed to measure the optical smoke density in various fire experiments in the present study. The relative measurement accuracy of low-cost device was evaluated through the comparison of optical density measured by a high-cost standard device consisting of He-Ne laser, photo detector and various optical components. The low-cost device was composed of laser module, photocell and acrylic board. From the experiments using a smoke generator can be easily adjusted the smoke concentration, it was found that the low-cost device could measure the smoke density within the range of ${\pm}10%$, compared to the standard device. In addition, the reliability of low-cost device was also confirmed in the experiment using a polyethylene flame. Finally, it is expected that the low-cost device developed with real-time measurement and simple installation for measuring the smoke density will be used instead of the high-cost standard device.

• Journal of Korean Physical Therapy Science
• /
• v.8 no.2
• /
• pp.1015-1021
• /
• 2001

Objectives: The objective of this study was to investigate analysis of women with low back pain and osteoporosis were measured for 40 normal in the women from July 20, 2000 to October 20, 2000. Methods: Bone mineral density(BMD) of lumbar spine was measured using energy absorptiometry and were correlated with age, calcium. alkaline phosphatase. bone mineral density standard T scores(p<0.05). Results: The bone mineral density of the lumbar spine decreased with aging, The bone mineral density of the lumbar spine decreased with the serum calcium and phosphate increased. The mean bone mineral density of the lumbar spine of healthy women in age($50\sim59$) was $0.83g/cm^2$, the lumbar spine of women low back pain in age($50\sim59$) was 0.75 glad. Conclusion: In the multiple regression of risk factors to bone mineral density(BMD) of lumbar spine were correlated with age, of abortion, calcium, bone mineral density standard T scores(p<0,05). In the prevention and early diagnosis and treatment of osteoporosis, the physician should consider the risk factors.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.10
• /
• pp.841-847
• /
• 2021

In this paper, the applicability of the low-density surface film copper mesh for aircraft applications have been analyzed. Recently, low-density surface film copper mesh is developed to reduce weight and cost compared with traditional surface film copper mesh. In order to apply low-density surface film copper mesh to aircraft, it is needed to analyze its electromagnetic effects as well as structural integrity with sandwich panels to prevent pinholes. The structural integrity and electromagnetic characteristics have been analyzed for 2 samples of low-density surface film copper mesh and 1 sample of surface film copper mesh. To review the applicability of the low-density surface film, it is combined with sandwich composite panel to confirm pinhole effects. The low-density surface film has been modeled as a periodic structure and analyzed with 3D electromagnetic simulation tool. The simulation results has been verified through measured electromagnetic transmission results using free space measurements. From the results, it will be possible to use these results for the analysis and the applicability of low-density surface film copper mesh for aircraft.