• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3A
• /
• pp.337-346
• /
• 2004

Punctured convolutional codes increase transmission efficiency without increasing hardware complexity. However, Viterbi decoder supporting punctured codes requires long decoding length and large survivor memory to achieve sifficiently low bit error rate (BER), when compared to the Viterbi decoder for a rate 1/2 convolutional code. This Paper presents novel architecture adopting a pipelined trace-forward unit reducing survivor memory requirements in the Viterbi decoder. The proposed survivor path architecture reduces the memory requirements by removing the initial decoding delay needed to perform trace-back operation and by accelerating the trace-forward process to identify the survivor path in the Viterbi decoder. Experimental results show that the area of survivor path unit has been reduced by 16％ compared to that of conventional hybrid survivor path unit.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3A
• /
• pp.324-330
• /
• 2004

In this paper, we propose the TCM(Trellis coded modulation) decoding scheme that reduces the number of operations in branch metric with STBC(space time block codes) channel information and present the implementation results. The proposed TCM decoding scheme needs only 1 signal point in each TCM subset. Using bias point scheme, It detects the minimum distance symbol. The proposed TCM decoding scheme can reduce the branch metric calculations. In case of 16QAM 8 subset, the reduction ratio is about 50％ and for 64QAM 8 subset, about 80％ reduction can be obtained. The results of logic synthesis for the TCM and STBC decoder with the proposed scheme are 57.6K gate count.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.66-72
• /
• 2009

In this paper, an efficient frequency offset synchronization structure for OFDM(Orthogonal Frequency Division Multiplexing) is proposed. Conventional CORDIC(Coordinate Rotation Digital Computer) algorithm for frequency offset synchronization utilizes two CORDIC hardware i.e., one is vector mode for phase estimation, the other is rotation mode for compensation. But proposed structure utilizes one CORDIC hardware and divider. Through simulation, it is shown that hardware implementation complexity is reduced compared with conventional structures. The Verilog-HDL coding and front-end chip implementation results for the proposed structure show 22.1% gate count reduction comparison with those of the conventional structure.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.4 s.304
• /
• pp.153-158
• /
• 2005

In this paper, a filter is proposed to compensate droop of the CIC filter for SDR. The proposed compensation filter has almost linear-phase characteristic, requires low operational complexity, and is cost-effective due to its second-order characteristic and lowest operational rate in the baseband.. Especially, it compensates droop in the passband with little performance degradation in the stopband. It is shown, by a design example and its performance analysis, that the proposed compensation method gives performance enhancement in communication systems. It is also shown that the proposed method is superior to conventional ones in view of memory usage and computational load.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.1
• /
• pp.29-34
• /
• 2010

This paper proposes a new parity-preserving reversible logic gate. It is a parity-preserving reversible logic gate, that is, the party of the outputs matches that of the inputs. In recent year, reversible logic gate has emerged as one of the important approaches for power optimization with its application in low CMOS design, quantum computing and nono-technology. We show that our proposed parity-preserving reversible logic gate is much better in terms of number of reversible logic gates, number of garbage-outputs and hardware complexity with compared ti the exiting counterpart.

• 전자공학회논문지 IE
• /
• v.45 no.4
• /
• pp.1-6
• /
• 2008

A fast-hopping frequency synthesizer that reduces complexity and power consumption is presented for MB-OFDM UWB applications. The proposed architecture uses 3960 MHz LC VCO, 528 MHz ring oscillator, passive mixer and LC-tuned Q-enhancement BPF to generate Band Group 1 frequencies. The adjacent channel rejection ratio is less than -40 dBc for 3432 MHz and -H dBc for 4488 MHz. A fast switching SCL-tpre MUX is used to produce the required channel output signal and it takes less than 2.2 ns for band switching. The total power consumption is 47.9 mW from a 1.8 V supply.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.481-484
• /
• 2005

The direct conversion method is classified into the structure using the mixing technology and six-port scheme. In the view point of complexity and integration the direct conversion method using the six-port scheme is superior to that with mixing technology. Expecially, the six-port direct conversion technology provides the low power consumption and the broad-band characteristic. In this paper, the six-port direct conversion receiver with the branch-line coupler and the ring hybrid coupler is designed respectively. The performances of the designed six-port schemes are analyzed and the six-port scheme with superior performance characteristics is proposed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.809-811
• /
• 2010

In most floating-point operations related with 3D graphic applications for mobile devices, properly approximated data calculations with reduced complexity and low power are preferable to exactly rounded floating-point operations with unnecessary preciseness with cost. Among all the sophisticated floating-point arithmetic operations, multiplication and division are the most complicated and time-consuming, and they can be transformed into addition and subtraction repectively by adopting the logarithmic conversion. In this process, the most important factor for performance is how high we can make an approximation of the logarithm conversion. In this paper, we cover the trends in studying the logarithm conversion circuit designs. We also discuss the important factor in design issues and the applicable fields in detail.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.2
• /
• pp.514-535
• /
• 2019

Information-centric networks operate under the assumption that all network components have built-in caching capabilities. Integrating the caching strategies of information centric networking (ICN) with wireless virtualization improves the gain of virtual infrastructure content caching. In this paper, we propose a framework for software-defined information centric virtualized wireless device-to-device (D2D) networks. Enabling D2D communications in virtualized ICN increases the spectral efficiency due to reuse and proximity gains while the software-defined network (SDN) as a platform also simplifies the computational overhead. In this framework, we propose a joint virtual resource and cache allocation solution for latency-sensitive applications in the next-generation cellular networks. As the formulated problem is NP-hard, we design low-complexity heuristic algorithms which are intuitive and efficient. In our proposed framework, different services can share a pool of infrastructure items. We evaluate our proposed framework and algorithm through extensive simulations. The results demonstrate significant improvements in terms of visiting latency, end user QoE, InP resource utilization and MVNO utility gain.

• Progress in Medical Physics
• /
• v.31 no.4
• /
• pp.172-178
• /
• 2020

Purpose: Radiation oncology information systems (ROIS) have evolved toward connecting and integrating information between radiation treatment procedures. ROIS can play an important role in utilizing modern radiotherapy techniques that have high complexity and require a large amount of information. Methods: Using Access^TM software, we have developed a relational database that is highly optimized for a radiotherapeutic workflow. Results: The prescription table was chosen as the core table to which the other tables were connected, and three types of forms-charts, worklists, and calendars- were suggested. A fast and reliable channel for delivering orders and remarks according to changes in the situation was also designed. Conclusions: We expect our ROIS design to inspire those who need to develop and manage an individual ROIS suitable for their radiation oncology departments at a low cost.