• International Journal of High-Rise Buildings
• /
• v.2 no.2
• /
• pp.85-91
• /
• 2013

Tall building has some controversial aspects with low carbon city, but it is still a sensible choice for the metropolitan city. This paper aims to develop holistic urban design strategies to minimize impacts on the environment, increase energy efficiency and improve the quality of living in tall building communities by utilizing tall building characteristics. It puts forward the concept of integrated tall building-low carbon community design from the perspective of urban design, and summarizes five core strategies: Temporal state based on energy use, Complementary energy use state based on functions, Spatial state based on regional environment features, Transportation state based on low-carbon lifestyle and Waste utilization state based on tall building characteristics. It also applies the strategies to a practical project. The results show that the proposed urban design strategies are available approaches to mitigate the side effects of tall building on low carbon city.

• Journal of Fisheries and Marine Sciences Education
• /
• v.24 no.3
• /
• pp.395-405
• /
• 2012

This study was investigated 35 government-authorized and officially approved textbooks for the Fisheries and marine high school which were published by the 2007 Revised Curriculum at 2009 for analyzing the objective and content domains concerning school the low carbon green growth education. Prior to the grounds of analyzing for the objective and content domains were presented, the factors of the grounds were made based on the low carbon green growth standards for the nation. According to the analysis, the findings which were as follows; 18(51.4%) in 35 textbooks and 666(6.4%) in 10,406 pages were related the low carbon green growth education in the course of the Fisheries and marine high school education. There were 37 participation domains, 27 information and knowledge domains, 9 value and attitude domains and 6 skill domains in the objective domains. The content domains were consisted of 33 green growth, 23 climate change, 10 energy conservation, 6 low carbon and 6 international cooperation.

• Corrosion Science and Technology
• /
• v.20 no.1
• /
• pp.15-21
• /
• 2021

Through a simple filtration process, followed by carbonization within a reductive environment, coffee waste grounds can be transformed into a non-porous hard carbon for use in multiple contexts. This resulting coffee-waste carbon has been evaluated as an eco-friendly and cost-effective replacement for conventional graphite. When compared with different types of carbon, our study found that the coffee-waste carbon fell into the category of hard carbon, as verified from the galvanostatic charge/discharge profiles. The coffee-waste carbon showed a superior rate capability when compared to that of graphite, while compromising smaller capacity at low C rates. During electrochemical reactions, it was also found that the coffee-waste carbon is well exposed to electrolytes, and its disordered characteristic is advantageous for ionic transport which leads to the low tortuosity of Li ions. Finally, the high irreversible capacity (low initial Coulombic efficiency) of the coffee-waste carbon, which if also often observed in amorphous carbon, can be adequately resolved through a solution-based prelithiation process, thereby proving that the coffee-waste carbon material is quite suitable for commercial use as an anode material for quickly-chargeable electrodes.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.47-48
• /
• 2014

This study is to hydration property of low carbon type recycled cement from waste cementitious powder and cement raw materials. Waste cementitious powder possible to low carbon type recycled cement in small part of additive materials. Also, low carbon type recycled cement using waste cementitious powder is suitable for low heat type cement.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.04a
• /
• pp.109-109
• /
• 2000

Recently, carbon nanotube has been investigating for field emission display ( (FED) applications due to its high electron emission at relatively low electric field. However, the growing of carbon nanotube generally requires relatively high temperature processing such as arc-discharge (5,000 ~ $20,000^{\circ}C$) and laser evaporation (4,000 ~ $5,000^{\circ}C$) methods. In this presentation, low temperature growing of carbon nanotube by plasma enhanced chemical vapor deposition (PECVD) using nickel catalyst which is compatible to conventional FED processing temperature will be described. Carbon n notubes with average length of 100 run and diameter of 2 ~ $3\mu$ill were successfully grown on silicon substrate with native oxide layer at $550^{\circ}C$using nickel catalyst. The morphology and microstructure of carbon nanotube was highly depended on the processing temperature and nickel layer thickness. No significant carbon nanotube growing was observed with samples deposited on silicon substrates without native oxide layer. This is believed due to the formation of nickel-silicide and this deteriorated the catalytic role of nickel. The formation of nickel-silicide was confirmed by x-ray analysis. The role of native oxide layer and processing parameter dependence on microstructure of low temperature grown carbon nanotube, characterized by SEM, TEM XRD and R없nan spectroscopy, will be presented.

• Carbon letters
• /
• v.10 no.3
• /
• pp.230-233
• /
• 2009

In this study, a low temperature growth of high-quality carbon nanotubes on glass substrate using a local surface heating without heating damage to substrate was tried and characterized. The local joule heating was induced to only Ni/Ti metal film on glass substrate by applying voltage to the film. It was estimated that local surface joule heating method could heat the metal surface locally up to around $1200^{\circ}C$ by voltage control. We could successfully obtain high-quality carbon nanotubes grown at $300^{\circ}C$ by applying 125 V for joule heating as same as carbon nanotubes grown at $900^{\circ}C$.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.2
• /
• pp.65-74
• /
• 1997

The purpose of this study was to investigate the removal effect and variation of contaminated water by various water treatment processes using sediment filter, activated carbon, photocatalysis, reverse osmosis, ultra violet sterilizer and ultra filtration. The removal effect of chloride and trace metal was low by activated carbon and ultra filter but high in reverse osmosis. The removal effect of bacteria and E. coli was low by activated carbon and membrane filter system using activated carbon but high in impregnated activated carbon. The removal effect of TCE was low in sand and ultra filter system as compared with activated carbon. Ultra filtration process was effective for purify agricultural water without E.coli. Reverse osmosis was effective to remove heavy metal and activated carbon was effective to remove halogenated organic chemical compound. The flux and the removal effect of COD in spiral wound ultrafilter were higher than the hollow fiber ultrafilter.

• Journal of the Korean Professional Engineers Association
• /
• v.44 no.6
• /
• pp.29-34
• /
• 2011

Korea has been officially classified as a non Annex-I country under the Kyoto Protocol, however, international community is used to considering it as if it were an Annex-I country. Korea has been under great pressure from the international community, especially from the EU and the US, to get included as an Annex-I country or to accept a legally-binding emissions reduction target like other developed nations. Korean Government declared its national target of emissions reduction in 2020 before the Copenhagen meeting, and also pronounced "Low-Carbon Green-Growth" as a new national paradigm to drive the entire nation toward a low carbon society and develop a new growth momentum. The 'green Act', which was passed by the National Assembly in 2009, is a comprehensive and fundamental law providing legal grounds to all of the national policies and measures that are needed to transform the nation into a low-carbon society. Korean government announced to begin Carbon Emissions Trading from 2015, instead of the originally scheduled year of 2013, considering global trends and industrial competitiveness in a flexible manner. The Carbon Emission Trading would reduce carbon emissions by 30 percent from the expected 2020 level, or 4 percent below its emissions in 2005.

• Journal of Korean Society of Rural Planning
• /
• v.17 no.1
• /
• pp.29-42
• /
• 2011

The Purpose of this study is to develop indicators for low carbon planning in rural village. We made two indicators for inland area and waterside area to consider regional disparities. To develop indicators, a draft of the indicators was estimated with collected research materials and 52 experts reviewed this draft three times with Modified Delphi Technique to check the validity and revise the draft. As a result, the inland indicators were settled with 4 domains 8 items 20 indicators and the waterside indicators were 4 domains 8 items 22 indicators. The final indicators will be used to realize low carbon rural village planning in future which the government is pushing forward with construction of six-hundred low carbon green village.

• Journal of Welding and Joining
• /
• v.7 no.4
• /
• pp.12-21
• /
• 1989

Laser beam welding parameters have experimentally investigated, using a continuous wave 3kW $CO_2$ laser with the various travel speeds, beam mode and laser beam power in low carbon steels. An optimum position of focus and the effect of shielding gas on penetration depth with varying the flow range of 0.5 to 5.1m/min have been combined to investigate the effect of laser power and travel speed on penetration depth and bead width. It is found that the optimum position of focus in 3kW class laser is 0.5 to 1.5mm below the surface of the material. The flow rate of shielding gas affects the penetration depth and He is more effective than Ar. The penetration depth in laser welds of low carbon steels is between two and four times of the bead width. Laser beam welding of butt joints in 2mm thick carbon steel has been carried out to establish a weldability lobe. The lobe indicating acceptable welding conditions is introduced.