• Journal of the Korean Institute of Gas
• /
• v.9 no.3 s.28
• /
• pp.32-37
• /
• 2005

Hose bands, which are used in LPG (Liquefied Petroleum Gas) or LNG (Liquefied Natural Gas) facilities for home use to join low pressure hoses with fuse-cocks (or regulators), should give a tight connection to prevent a gas leakage from hose connection parts. In this paper, hydraulic pressure tests and pull force tests were carried out to evaluate the performance and swaging length of hose bands. Experimental results showed that the swaging force of ear type bands were higher than those of spring bands and also showed that the optimal swaging length was about 1${\~}$2 mm from the hose end.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2045-2051
• /
• 2009

A 5-GHz band Low Noise Amplifier(LNA) using SOI MOSFET is designed. To improve the noise performance, depletion-type SOI MOSFET is adopted, and it is designed by the two-stage topology consisting of common-source and common-gate stages for low-voltage operation. The fabricated LNA achieved an S11 of less than -10dB, voltage gain of 21dB with a power consumption of 8.3mW at 5.5GHz, and a noise figure of 1.7dB indicated that the depletion-type LNA improved the noise figure by 0.3dB compared with conventional type. These results show the feasibility of a CMOS LNA employing depletion-type SOI MOSFET for low-noise application.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.09a
• /
• pp.52-59
• /
• 2001

The photoluminescence and the photo-current from p-type GaN films were investigated on both room- and low-temperatures for various Mg doping concentrations. At a low Mg doping level, there exists a photoluminescence center of the donor and the acceptor pair transition of the 3.28-eV band. This center is correlated with the defects for a shallow donor of the VGa and for an acceptor of MgGa. The acceptor level shows the binding energy of 0.2-0.25 eV, which was observed by the photon energy of the photo-current signal of 3.02-3.31 eV. At a high Mg doping level, there is a photoluminescence center of a deep donor and an acceptor pair transition of the 2.76-eV blue band. This center is attributed to the defect structures of MgGa-VN for the deep donor and MgGa for the acceptor. For low. doped samples, thermal annealing provides an additional photo-current signal for an unoccupied deep acceptor levels of 0.87-1.35 eV above valence band, indicating the p-type activation.

• Phonetics and Speech Sciences
• /
• v.6 no.1
• /
• pp.85-93
• /
• 2014

This paper investigated the effects of frequency band limitation on perceptual characteristics of Korean vowels. Monosyllabic speech (144 syllables of CV type, 56 syllables of VC type, 8 syllables of V type) produced by two announcers were low- and high-pass filtered with cutoff frequencies ranging from 300 to 5000 Hz. Six listeners with normal hearing performed perception tests by types of filter and cutoff frequencies. We reported phoneme recognition rates and types of perception error of band-limited Korean vowels to examine how frequency distortion in the process of speech transmission affect listener's perception.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.178-183
• /
• 2003

This paper deals with transmission loss characteristics of the panel type silencer to control low frequency noise. The panel type silencer is composed of many Helmholtz resonators by side branch. Each resonator has high transmission loss on the narrow band of its resonance frequency. Direct arrangement of the resonators increases mainly the magnitude of transmission loss. If we arrange the resonators in a row, the peak and band of transmission loss are increased. This makes the resonator array to have high transmission loss in the broader band. Using this idea, we design a silencer that has broader band characteristics and smaller volume.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.2
• /
• pp.106-111
• /
• 1995

This study was planned to identify the effect of low-temperature stress on Alcohol dehydrogenase(ADH) isozyme in sixteen varieties of Italian ryegrass using starch gel electrophoresis. The specific electrophoretic zymograms of each variety were observed by ADH isozyme. The results were summarized as follows: 1. All tested varieties displayed two band zone by ADH and R.f values were 0.63 and 0.60, respectively. 2. There were four band type for ADH isozyme of 16 varieties classified with ADH isozyme dyeing intensity. According to dyeing intensity 7, 2, 1 and 6 varieties belong to banding type I,II,III and IV, respectively(Fig.2-A, B). 3. The effect of short tern low-temperature stress induces ADH gene expresson in Italian ryegrass, which may reflect a fundmental shift in energy metabolism to ensure plant tissue survival during the low-temperature stress period.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.1
• /
• pp.24-28
• /
• 2010

This paper is presented on the antenna design for notepc platform. We present the antenna with combination of electric-magnetic radiator for dual-band Wireless Local Area Network (WLAN) service and a High Speed Downlink Packet Access (HSDPA) service. Due to the limited antenna space in notepc platform, the antennas for various wireless communication service should be located at a very small area. In this paper, the magnetic-type radiator works for high frequency band (1.7 - 2.1 GHz) application and the electric-type radiator works for low frequency band (820 - 960 MHz) application. This combination produces wide-band characteristics in the high frequency band. Simulation and experimental results of input impedance and gain characteristics of the proposed antenna are presented. There are good agreements between the simulated and measured S11 and gain values.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.574-577
• /
• 2004

A coupler is a microwave passive component used for power coupling or dividing. Regarding the trend of current telecommunication systems it is highly desirable for monolithic integration of passive components as such LTCC(Low temperature cofired ceramics) technology offers potential advantage in size, cost and performance. Utilizing LTCC technology a 2012 size type dual band coupler for DCS and EGSM band was fabricated. Its characteristics such as coupling, insertion loss, isolation and directivity was measured and compared with simulation results

• Phonetics and Speech Sciences
• /
• v.6 no.1
• /
• pp.95-101
• /
• 2014

This paper investigated the effects of frequency band limitation on perceptual characteristics of Korean consonants. Monosyllabic speech (144 syllables of CV type, 56 syllables of VC type, 8 syllables of V type) produced by two announcers were low- and high-pass filtered with cutoff frequencies ranging from 300 to 5000 Hz. Six listeners with normal hearing performed perception test by types of filter and cutoff frequencies. We reported phoneme recognition rates and types of perception error of band-limited Korean consonants to examine how frequency distortion in the process of speech transmission affect listener's perception. The results showed that recognition rates varied with the following factors: position in a syllable, manner of articulation, place of articulation, and phonation types. Consonants in the final position were stronger to the frequency band limitation than those in the initial position. Fricatives and Affricates are stronger than stops. Fortis consonants were less stronger than their lenis or aspirated counterparts. Types of perception error also varied depending on such factors as consonant's place of articulation: In case of bilabial stops, they were perceived as alveolar stops with while in cases of alveolar and velar stops, there were changes in phonation types without any change in the place of articulation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.392-395
• /
• 2004

A coupler is a microwave passive component used for power coupling or dividing. Regarding the trend of current telecommunication systems it is highly desirable for monolithic integration of passive components as such LTCC(Low temperature cofired ceramics) technology offers potential advantage in size, cost and performance. Utilizing LTCC technology a 1608 size type dual band coupler for DCS and EGSM band was fabricated. Its characteristics such as coupling, insertion loss, isolation and directivity was measured and compared with simulation results.