A Study on Swaging Characteristics of Band for Low Pressure Hose

저압 호스용 밴드의 체결특성에 관한 연구

  • Kim Tyoung-Gyu (Institute of Gas Safety R&D, Korea Gas Safety Corporation) ;
  • Kim Pil-Jong (Institute of Gas Safety R&D, Korea Gas Safety Corporation) ;
  • Cho Seok-Beom (Institute of Gas Safety R&D, Korea Gas Safety Corporation) ;
  • Kwon Boo-Kil (Institute of Gas Safety R&D, Korea Gas Safety Corporation)
  • 김영규 (한국가스안전공사 가스안전연구개발원) ;
  • 김필종 (한국가스안전공사 가스안전연구개발원) ;
  • 조석범 (한국가스안전공사 가스안전연구개발원) ;
  • 권부길 (한국가스안전공사 가스안전연구개발원)
  • Published : 2005.09.01

Abstract

Hose bands, which are used in LPG (Liquefied Petroleum Gas) or LNG (Liquefied Natural Gas) facilities for home use to join low pressure hoses with fuse-cocks (or regulators), should give a tight connection to prevent a gas leakage from hose connection parts. In this paper, hydraulic pressure tests and pull force tests were carried out to evaluate the performance and swaging length of hose bands. Experimental results showed that the swaging force of ear type bands were higher than those of spring bands and also showed that the optimal swaging length was about 1${\~}$2 mm from the hose end.

LP가스나 도시가스시설의 저압 호스 체결에서 견고함과 기밀성을 높이기 위해 호스밴드를 사용한다. 본 연구에서는 호스밴드의 성능 파악과 안전한 체결 거리의 제시를 위하여 호스밴드에 대한 내압강도와 당김력을 측정하였다. 호스밴드의 체결력은 스프링밴드 보다는 귀형밴드에서 높게 나타났으며 최적의 호스밴드 체결거리는 호스접속 끝단부로부터 1${\~}$2 mm일 때에 우수한 것으로 파악되었다.

Keywords