• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.8
• /
• pp.481-490
• /
• 2000

This paper analyzes interference power, Erlang capacity, the number of handoff occurrences, and call blocking probability with respect to the cell radius, the soft handoff region, and the mobile's velocity in a CDMA hierarchical cellular system. The microcell cellular system has the higher Erlang capacity than the macrocell cellular system. However, the microcell cellular system, which has a high system capacity through frequency reuse has the call blocking probability higher than macrocell cellular system. Also the interference power and the call blocking probability are decreased with the operation of soft handoff. Therefore, this paper presents the optimization of soft handoff region so as to maximize system's Erlang capacity with the low the call blocking probability according to mobile's velocity in the CDMA hierarchial cellular system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.05a
• /
• pp.70-73
• /
• 1988

Influence of Velocity and Temperature on Streaming Electrification of Insulating Oil is investigated by injection method. Leakage current is increased slightly with increasing temperature in the temperature range 20 to $80^{\circ}C$ at low flow rate, however, it show a peak in the temperature 40 to $60^{\circ}C$ at high flow rate. Leakage current is also increased linearly with increasing flow rate in the flow rate range 1 - 31/min but thereafter, it is increased abruptly with increasing flow rate.

• International Journal of Automotive Technology
• /
• v.8 no.1
• /
• pp.59-66
• /
• 2007

High frequency excitation terms in a cam profile can excite vibration of a cam follower system. In this paper, modified smoothing spline curves are used to reduce the high frequency terms. The essential difference between the proposed method and other existing approaches is its ability to make the principal cam motions smooth while still exactly satisfying boundary conditions of follower displacement, velocity and acceleration. The boundary values usually depend on the ramp properties of a cam. Our method, thus, allows designers to smooth the existing cam motion without any damages on its ramp areas. Because the ramp height, velocity and acceleration are maintained exactly, more radical smoothing is possible. An example shows that the proposed method can be a powerful tool of cam profile smoothing, which removes high frequency components in the cam profile excitations without any changes in ramp properties.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.3
• /
• pp.361-369
• /
• 2004

A metal fiber bed has seldom been applied to the practical filtration process despite its excellent mechanical and chemical stability. The filter-bed used in this work was highly porous with open structure, of which apparent porosity was 80 ∼ 90%. Although pressure loss across the filter-bed was very low, separation efficiency was found to be quite high. This paper focuses on the basic filtration mechanisms of a metal filter-bed and a thin ceramic filter from fly ash for reference. The experimental parameters were face velocity, dust loading and porosity of filter-bed. Pressure drop increased with increasing face velocity and dust feeding load for both filters. It also showed that dust particles deposited in the deep flow path, finally resulting in clogging the pore channels. It thereby indicates that the dominating mechanism of the metal filter-bed would be depth filtration. Meanwhile, the thin fly ash composite filters trapped the aerated dust mainly on the surface of the filter medium, so that the instantaneously formed dust layer might cause a steep increase of pressure drop across the filtration system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.10
• /
• pp.2630-2636
• /
• 1995

A theoretically based prediction for the determination of the subchannel friction factor at low pitch to the rod diameter ratio (P/D < 1.2) in the bare rod bundle flow has been developed. The present model assumes the validity of the Law of Wall over the entire flow area. The algebraic form of the Law of the Wall is integrated over the entire flow area and the local friction velocity variation along the rod periphery is considered in this study. The present method is applied to the rod bundles with P/D < 1.2, and the prediction results show good agreement with the available experimental data.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.778-783
• /
• 2003

The problem considered in this paper is about the collocation of sensor and actuator for the active control of sound and vibration. It is well-known that a point collocated sensor-actuator pair offers an unconditional stability with very high performance when it is used with a direct velocity feedback (DVFB) control, because the pair has strictly positive real (SPR) property. In order to utilize this SPR characteristics, a matched piezoelectric sensor and actuator pair is considered, but this pair suffers from the in-plane motion coupling problem with the out-of$.$plane motion due to the piezo sensor and actuator interaction. This coupling phnomenon limits the stability and performance of the matched pair with DVFB control. As a new alternative, a point sensor and piezoelectric actuator pair is also considered, which provides SPR property in all frequency range except at the first resonance in very low frequency. This non-SPR resonance could be minimized by applying a phase lag compensator.

• Journal of the Korean Society of Visualization
• /
• v.11 no.2
• /
• pp.34-40
• /
• 2013

A flow visualization near submerged nozzle of solid rocket motor was conducted by experiments. A numerical simulation was also performed to reveal detailed phenomena. Radial cold flow simulating hot gas was introduced by a porous grain model which was manufactured by perforated steel plates. The grain model was mounted in high-pressure chamber which has quartz glass at the top of the grain model. From the high-speed images, a rotating vortex was observed and the two type of counter-rotating momentums were generated in numerical results. The rotating momentum was generated at the fin-slot grain because of unbalance between high-velocity flow from slots and low-velocity flow from fin-bases. As a result, roll torques can be produced by the rotating vortex tube.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.6
• /
• pp.653-663
• /
• 2000

A lot of hazardous wastes are discharged as by-products of working process by industrial development. Hazardous wastes is physical characteristics of difficult destruction at hight temperature. Numerical simulation and combustion experiment performed of dump incinerator for hazardous waste incineration. For the numerical simulation, the SIMPLEST algorithm was used to ensure rapid converge A K-$\varepsilon$ model was incorporate for the enclosure of turbulence flow. Combustion model was used by ESCRS (extended simple chemically reacting system) model available of CHEMKIN thermodynamic data for the source term of species conservation equation or energy equation. Radiation model is used by six flux model. A parametric screening studies was carried out through numerical simulation and experiment. Residence time and concentration in the incinerator was strongly dependent on the parameters of mixture velocity, mixture equilibrium ratio, surrogate velocity and surrogate equilibrium ratio.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.1
• /
• pp.37-48
• /
• 1995

The TIDE, nonlinear finite element model for the simulation of tidal analysis in a shal- low ooastal area was tested for its applicability at the Saemankeum day. Calibration of the TIDE model has been carried out using the six observed field data collected at five locations within the region for tidal velocity. Verification tests have been done using the six observed field data and four data o- tained from the hydraulic model test for the tidal velocity and elevation. Since the simula- tion results for the tidal elevation at Kunsan outer port by the TIDE model are well agreed with the results from the tidal table for one month, it is proved that the TIDE model may be used effectively to predict the tidal movement in the Saemankeum bay for a longer period.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.6
• /
• pp.1-10
• /
• 2002

As the preliminary stage for the countermeasure of thermal loading in miller cycle engine, coolant flows in the cylinder head of base engine including exhaust valve bridge were visualized and analyzed by using PIV technique. It was found that low coolant velocity regions were around exhaust valve bridge, around which stagnation of the coolant flow was observed due to the complex geometry configuration of water jacket. And velocity variation between each cylinder was remarkable. For the countermeasure of these, it is necessary to enhance coolant flow around exhaust valve bridge and to improve the deviation of coolant flow between each cylinder.