• 한국재료학회지
• /
• 제24권3호
• /
• pp.152-158
• /
• 2014

We report the effect of the fabric of the surface microstructure on the CO gas sensing properties of $SnO_2$ thin films deposited on self-assembled Au nanodots ($SnO_2$/Au) that were formed on $SiO_2/Si$ substrates. We characterized structural and morphological properties, comparing them to those of $SnO_2$ thin films deposited directly onto $SiO_2/Si$ substrates. We observed a significant enhancement of CO gas sensing properties in the $SnO_2$/Au gas sensors, specifically exhibiting a high maximum response at $200^{\circ}C$ and quite a low detection limit of 1 ppm level in dry air. In particular, the response of the $SnO_2/Au$ gas sensor was found to reach the maximum value of 32.5 at $200^{\circ}C$, which is roughly 27 times higher than the response (~1.2) of the $SnO_2$ gas sensor obtained at the same operating temperature of $200^{\circ}C$. Furthermore, the $SnO_2/Au$ gas sensors displayed very fast response and recovery behaviors. The observed enhancement in the CO gas sensing properties of the $SnO_2/Au$ sensors is mainly ascribed to the formation of a nanostructured morphology in the active $SnO_2$ layer having a high specific surface-reaction area by the insertion of a nanodot form of Au nucleation layer.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 추계학술발표회논문집(1)
• /
• pp.719-725
• /
• 1997

This paper presents results of experimental studies on the heat transfer and solidification of the molten metal pool with overlying coolant with boiling. The metal pool is heated from the bottom surface and coolant is injected onto the molten metal pool. As a result, the crust, which is a solidified layer, may form at the top of the molten metal pool. Heat transfer is accomplished by a conjugate mechanism, which consists of the natural convection of the molten metal pool, the conduction in the crust layer and the convective boiling heat transfer in the coolant. This work examines the crust formation and the heat transfer rate on the molten metal pool with boiling coolant. The simulant molten pool material is tin (Sn) with the melting temperature of 232$^{\circ}C$. Demineralized water is used as the working coolant. The crust layer thickness was ostensibly varied by the heated bottom surface temperature of the test section, but not much affected by the coolant injection rate. The correlation beかeon the Nusselt number and the Rayleigh number in the molten metal Pool region of this study is compared against the crust formation experiment without coolant boiling and the literature correlations. The present experimental results are higher than those from the experiment without coolant boiling, but show general agreement with the Eckert correlation, with some deviations in the high and low ends of the Rayleigh number. This discrepancy is currently attributed to concurrent rapid boiling of the coolant on top of the metal layer.

• 반도체디스플레이기술학회지
• /
• 제7권4호
• /
• pp.7-11
• /
• 2008

ITO (Indium Tin Oxide) thin films have been extensively studied for OLED devices because they have high transparent properties in the visible wavelength and a low electrical resistivity. These ITO films are deposited by rf-magnetron sputtering under different ambient gases (Ar, Ar+$O_2$ and Ar+$H_2$) at $300^{\circ}C$. In order to investigate the influences of the oxygen and hydrogen, the flow rate of oxygen and hydrogen in argon has been changed from 0.5sccm to 5sccm and from 0.01sccm to 0.25sccm respectively. The resistivity of ITO film increased with increasing flow rate of $O_2$ under Ar+$O_2$ while it is nearly constant under Ar+$H_2$. And the peak of ITO films obtained (222) and (400) orientations and the average transmittance was over 80% in the visible range. The OLED device fabricated with different ITO substrates made by configuration of ITO/$\alpha$-NPD/Alq3/LiF/Al to elucidate the performance of ITO substrate for OLED device.

• 한국환경과학회지
• /
• 제16권7호
• /
• pp.855-863
• /
• 2007

In order to understand the temporal distribution of pico- and nanoplankton and factors controlling its distribution at a station in Okkye Bay of Masan Bay located in the southern part of Korea, this study was conducted on two weeks interval from April 2005 to April 2006, and several abiotic and biotic factors were measured. During the study, picoplankton consisted of picoflagellates, cyanobacteria and heterotrophic bacteria, and nanoplankton consisted of nanoflagellates excluding dinoflagellates. The concentration of chlorophyll-a (chl-a) was a mean of $4.33\;{\mu}g/L$, and the nanoplanktonic ($<20\;{\mu}m$) chl-a size fraction was a mean of 39.5 % and significantly correlated with water temperature. The abundances of cyanobacteria and photosynthetic flagellates (PF) were means of $24.4{\times}10^{3}\;cells/mL\;and\;2.87{\times}10^{3}\;cells/mL$, respectively. The contribution of picoflagellates to the PF abundance varied among the sampling occasions and was a mean of 29 %, but to the PF carbon biomass was 2.6 % only. The PF abundance had significant relationships with water temperature, and silicate and TIN concentrations, suggesting that the PF abundance seemed to be primarily bottom-up regulated. The abundance of heterotrophic bacteria was a mean of $3.18{\times}10^{6}\;cells/mL$ and unlike other ecosystems it did not have relationships with chl-a and heterotrophic flagellates (HF), suggesting that bacterial abundance did not seem to be bottom-up or top-down regulated. HF mostly consisted of cells less than $5{\mu}m$ and its abundance was a mean of $2.71{\times}10^{3}\;cells/mL$. Of the HF abundance, picoflagellates occupied about 31 %, and occupied about 9 % of the HF carbon biomass. HF grazing activity on heterotrophic bacteria was relatively low and removed about 10 % of bacterial abundance, suggesting that HF might not be major consumers of bacteria and there seems to be other consumers in Okkye Bay. These results suggest that Okkye Bay may have a unique microbial ecosystem.

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.59-66
• /
• 2020

최근 휴대용 통신기기와 스마트 디스플레이의 결합은 휴대가 용이하고 이동을 하면서 모든 작업을 할 수 있다. 이에 본 논문에서는 휴대용 통신기기에서 저가격의 높은 투명전극을 찾기 위해 여러 가지 ITO(Indium Tin Oxide) 박막에 대해 연구하였다. ITO 박막은 DC 마그네트론 스펏터를 사용하였으며 1 분위기압을 1mTorr 증가 간격으로, 2 바이어스 전압은 10V 간격으로 변화시켜 측정하였다. 두께와 굴절율은 일립소미터를 사용하였으며 막의 단면과 표면의 형상은 주사전자현미경을 사용하여 조사하였다. 분석 결과를 통해 바이어스 전압이 300V 이상일 경우에 명확한 증착이 나타났으며 추가로 전압이 증가함에 따라 전체적으로 증착률이 증가하였다. 330V 조건에서 증착률이 가장 높았으며 뚜렷한 결정립이 관찰되었다.

• 한국응용곤충학회지
• /
• 제28권3호
• /
• pp.146-153
• /
• 1989

정박이응애(Tetranychus urticae koch)의 감수성계통에 대하여 유기찬계 살충제인 carbophenothion, ethion과 유기소계인 dicofol, 유기주석계인 cyhexatin 및 합성 pyrethroid계인 biphenthrin등으로 단제루대도태를 실시하여 각 살충제의 저항성발달 차이와 약제상호간의 교우저항성의 유무 및 정도를 시험.조사하였다. carbophenothion과 ethion은 22세대와 24세대 도태에 서 각각 156배와 64.1배의 높은 저항성을 나타내었다. dicofol은 28세대 도태에서 39.7배로 biphenthrin은 24세대도태에서 13배로 화학적계통이나 동일계통내에서도 약종에 따라 저항성유발 정도에 차이가 있었다. Carbophenothion 도태계통은 도태에 관치하지 않은 ethion에 대하여 높은 수준의 교우저항성을 나타내었으나 dicofol과 biphenthrin에는 낮은 수준의 교우저항성을 나타내었고, ethion 도태계통은 carbophenothion에 대해서 고도의 교우저항성을 나타내었다. Dicofol이과 biphenthrin 도태계통들은 모두 carbophenothion과 ethion에 대해서 중도의 교우저항성을 보였으며, cyhexatin 도태계통은 ethion과 carbophenothion에 대하여 고도의 교우저항성을 나타내 었다.

• Advances in Energy Research
• /
• 제5권3호
• /
• pp.219-226
• /
• 2017

Electrochemical double layer capacitors (EDLCs) have received a tremendous interest due to their suitability for diverse applications. They have been fabricated using different carbon based electrodes including activated carbons, single walled/multi walled carbon nano tubes. But, graphite which is one of the natural resources in Sri Lanka has not been given a considerable attention towards using for EDLCs though it is a famous carbon material. On the other hand, EDLCs are well reported with various liquid electrolytes which are associated with numerous drawbacks. Gel polymer electrolytes (GPE) are well known alternative for liquid electrolytes. In this paper, it is reported about an EDLC fabricated with a nano composite polyethylene oxide based GPE and two Sri Lankan graphite based electrodes. The composition of the GPE was [{(10PEO: $NaClO_4$) molar ratio}: 75wt.% PC] : 5 wt.% $TiO_2$. GPE was prepared using the solvent casting method. Two graphite electrodes were prepared by mixing 85% graphite and 15% polyvinylidenefluoride (PVdF) in acetone and casting n fluorine doped tin oxide glass plates. GPE film was sandwiched in between the two graphite electrodes. A non faradaic charge discharge mechanism was observed from the Cyclic Voltammetry study. GPE was stable in the potential windows from (-0.8 V-0.8 V) to (-1.5 V-1.5 V). By increasing the width of the potential window, single electrode specific capacity increased. Impedance plots confirmed the capacitive behavior at low frequency region. Galvanostatic charge discharge test yielded an average discharge capacity of $0.60Fg^{-1}$.

• 한국측량학회지
• /
• 제18권2호
• /
• pp.169-177
• /
• 2000

지형공간정보체계에 있어서 실세계의 자연지형에 대한 모델링 기법은 지형정보처리의 주요한 구성요소이다. 본 연구는 지형공간정보체계에서 불규칙삼각망을 이용하여 지형특징을 고려한 고정밀 3차원 공간분석기법 개발 및 그 적용기법에 관한 연구로서, 연구결과 완경사지와 급경사지의 경우 지성선을 고려한 모델 3의 경우가, 복잡지의 경우 peak를 고려한 모델 2의 경우가 상대적으로 비교모델에 비해 작은 RMSE를 보임으로써 비교모델 중 가장 정밀도가 양호함을 알 수 있었다. 그리고 경사도 평가방법과 surface구축방법에 따른 최적의 루틴을 도출한 결과 완경사지의 경우 N_T, LSP_T, LSQ_T의 루틴, 급경사지의 경우 N_T의 루틴. 복잡지의 경우 LSQ_T의 루틴으로 공간분석을 수행하는 기법이 고정밀 3차원 공간분석을 위한 최적의 루틴으로 제시되었다.

• 한국세라믹학회지
• /
• 제40권11호
• /
• pp.1073-1077
• /
• 2003

Sn $O_2$ 가스센서는 낮은 농도의 가연성 가스 및 유독 가스를 표면 저항의 변화로부터 탐지할 수 있으나, 가스 선택성이 부족하다는 단점을 가지고 있다. 이러한 단점을 보완하기 위해서는 가스반응기구의 규명과 같은 기초이론 연구와 함께 선택성이 우수한 센서재료의 개발 및 적절한 신호처리방법의 적용이 필요하다. 본 논문에서는 Sn $O_2$ 표면에서 일어나는 에탄올 (C$_2$ $H_{5}$OH)과 아세토니트릴($CH_3$CN)의 촉매산화반응을 가스크로마토그래피 분석을 통해 확인하였다. PdCl$_2$가 첨가된 Sn $O_2$ 센서는 에탄올과 아세토니트릴에 대하여 높은 감도를 보였고, 반면에 La$_2$ $O_3$가 첨가된 Sn $O_2$ 센서는 에탄올에 대해서는 높은 감도를, 그리고 아세토니트릴에 대해서는 낮은 감도를 보였다. 이들 두 센서재료 개발 및 패턴인식기법적용을 통하여 아세토니트릴에 대한 선택성을 크게 증가시킬 수 있었다. 아세토니트릴에 대한 최소 탐지농도는, 공기 중에서는 15 ppm이었고, 다른 방해가스와 함께 존재할 경우에는 20 ppm에서 100 ppm 정도로 나타났다.

• 한국세라믹학회지
• /
• 제54권3호
• /
• pp.243-248
• /
• 2017

Pd-doped $SnO_2$ thick film with a pure tetragonal phase was prepared on patterned Pt electrodes by an ink dropping method. Nanostructured $SnO_2$ powder with a diameter of 10 nm was obtained by a modified hydrazine method. Then the ink solution was fabricated by mixing water, glycerol, bicine and the Pd-doped $SnO_2$ powder. When the Pd doping concentration was increased, the grain size of the Pd-doped $SnO_2$ thick film became smaller. However, an agglomerated and extruded surface morphology was observed for the films with Pd addition over 4 wt%. The orthorhombic phase disappeared even at a low Pd doping concentration and a PdO peak was obtained for a high Pd doping concentration. The crack-free Pd-doped $SnO_2$ thick films were able to successfully fill the $30{\mu}m$ gap of the patterned Pt electrodes by the optimized ink dropping method. The prepared 3 wt% Pd-doped $SnO_2$ thick films showed monoxide gas responses ($R_{air}/R_{CO}$) of 4.0 and 35.6 for 100 and 5000 ppm, respectively.