• The Korean Journal of Food And Nutrition
• /
• v.31 no.2
• /
• pp.301-307
• /
• 2018

In this study, a relatively effective process is used to sterilize Escherichia coli on the surface of micro-sized calcium citrate powder using nitrogen and argon as process gases in a low-temperature vacuum plasma treatment. The purpose of this study is to confirm and to introduce the effectiveness of homogeneous surface treatment for the sterilization of fine inorganic powder by the rotatable low-temperature RF plasma system designed by ourselves. The results of the test using 3M petrifilm showed that there were no remarkable spots in the case of the surface of plasma treated powder, whereas the untreated powder showed many blue spots, which indicating that the E. coli was alive. After 5 days, in the same samples, the blue spots were seen to be larger and darker than before, while the plasma-treated powder showed no changes. The results from FE-SEM analysis showed that the E. coli was damaged and/or destroyed by reactive species generated in the plasma space, resulting in the E. coli being sterilized. Furthermore, the sterilization effects according to the selected parameters ($N_2$ and Ar; flow rate 30 and 50 sccm) adapted in this study were mutually similar, regardless of such different process parameters, and this indicates that homogeneous treatment of powder surfaces could be more effective than conventional methods. Therefore, the plasma apparatus used in this study may be a practical method to use in a powerful sterilization process in powder-type food.

• Journal of Life Science
• /
• v.12 no.5
• /
• pp.589-594
• /
• 2002

Changes in the content of volatile terpenoids were investigated with heat-treated carrot. As heat treatment temperature became higher, the amount of volatile terpenoids decreased significantly. According to heat-treatment period, the volatile terpenoids, a-pinene and total terpenoids, decreased drastically during the initial 30-minutes of heat treatment but the rate of decrease slowed down afterwards. When changes in the content of volatile terpenoids in carrot juice were investigated according to sterilization temperature and period, the content decreased quickly with higher sterilization temperature. According to sterilization period, the content of volatile terpenoids decreased drastically during the initial 20-minutes of sterilization but decreased gradually afterwards. The amount of total terpenoids decreased more when sterilization was done at 10$0^{\circ}C$ for 20 minutes compared to sterilization at 6$0^{\circ}C$ and 8$0^{\circ}C$ for 60 min. In order to reduce the amount of volatile terpenoids in carrot juice, sterilization at high temperature for a short period of time would be more effective compared with sterilization at low temperature for a long period of time.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.5
• /
• pp.818-823
• /
• 2013

In the process of sterilization during the manufacture of beverages, both the treatment time and the temperature influence the beverage taste and flavor. Therefore, to improve the beverage quality, a nonthermal sterilization method is preferred to a high-temperature one. A nonthermal method, ultrasonic treatment by shock waves from cavitation, has been known to have a sterilizing effect. In this study, to observe the effect of ultrasonic frequency and treatment time on beverage quality, batch type ultrasonic equipment was fabricated and tested. Further, to evaluate the applicability of this ultrasonic method to an in-situ process, flow type ultrasonic heptagonal equipment was fabricated and then used to perform a sterilization experiment. Subsequently, the sterilizing effect was measured under ultrasonic and low-temperature ($55^{\circ}C$) treatments. Based on the obtained results, ultrasonic sterilization technology that can be applied for treatments at flow rates of up to 3 L/min was developed.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.39 no.1
• /
• pp.39-44
• /
• 2019

The effect of heat treatment on the sterilization and fatty acid compositions of silkworm powder was carried out under the guidance of Ministry of Food and Drug Safety. Food borne pathogens or microorganisms including E. coli, Salmonella spp., Listeria monocytogenes, Staphylococus aureus, Clostridium perfringens and aflatoxin, were not detected. The fatty acid composition was hardly changed after the silkworm powder was treated to a high temperature of $121^{\circ}C$. The low temperature sterilization of silkworm powder at $63^{\circ}C$ decreased the concentration of E. coli while high temperature sterilization at $121^{\circ}C$ has found no traces of microorganism.

• The Korean Journal of Mycology
• /
• v.30 no.2
• /
• pp.99-103
• /
• 2002

The suitable sterilization conditions in pot cultivation of varieties of Chunchunutari-2-ho and Suhannutari-1-ho Pleurotus ostreatus were investigated. The substrate formulations for the cultivation consisted of 40% poplar sawdust, 40% waste cotton and 20% beet pulp (PWB), and 40% poplar sawdust, 40% cotton seed hull and 20% beet pulp (PCB). The increase in the sterilization temperature caused decrease in the pH of the substrate. The moisture content of PWB substrate increased by 1.8%, but that of PCB substrate decreased by 4.1 % after low temperature sterilization ($12hr\;at\;60^{\circ}C$). However, a little change in the sterilization at higher temperature ($6hr\;at\;100^{\circ}C\;and\;90min\;at\;121^{\circ}C$) did not alter the moisture content of both substrate appreciably. The duration of mycelial growth was longest and its density was lowest in low temperature sterilization ($12hr\;at\;60^{\circ}C$). The high pressure sterilization ($90min\;at\;121^{\circ}C$) of PCB substrate produced high yield (236.6 g/pot) and the highest biological efficiency (96.6%) for Chunchunutari-2-ho. On the contrary the high temperatures sterilization ($6hr\;at\;100^{\circ}C$) of PCB substrate resulted in the yield of 259.1 g/pot with the biological efficiency 94.9% for Suhannutari-2-ho.

• Food Engineering Progress
• /
• v.23 no.2
• /
• pp.87-93
• /
• 2019

Temperature distribution studies were performed in steam-air retort to investigate the influence of various processing conditions (come-up time, sterilization temperature, and internal pressure throughout the steam-air retort). Retort temperature data were analyzed for temperature deviations during holding phase, maximum temperature difference between test locations at the beginning and after 1, 3, and 5 min of the holding phase, and box-and-whiskers plots for each location during the holding phase. The results showed that high sterilization temperature led to a more uniform temperature distribution than low sterilization temperature (pasteurization). In pasteurization condition, the temperature stability was slightly increased by increasing pressure during the holding phase. On the other hand, the temperature stability was slightly decreased in high sterilization temperature condition. Programming of the come-up phase did not affect the temperature uniformity. In addition, the slowest cold spot was found at the bottom floor during the holding phase in all conditions. This study determined that the temperature distribution is affected by retort processing conditions, but the steam-air retort needs more validation tests for temperature stability.

• Journal of Dairy Science and Biotechnology
• /
• v.35 no.2
• /
• pp.121-133
• /
• 2017

A small amount of milk is sold as 'untreated' or raw in the US; the two most commonly used heat-treatments for milk sold in retail markets are pasteurization (LTLT, low-temperature long time; HTST, high-temperature short time) and sterilization (UHT, ultra-high temperature). These treatments extend the shelf life of milk. The main purpose of heat treatment is to reduce pathogenic and perishable microbial populations, inactivate enzymes, and minimize chemical reactions and physical changes. Milk UHT processing combined with aseptic packaging has been introduced to produce shelf-stable products with less chemical damage than sterile milk in containers. Two basic principles of UHT treatment distinguish this method from in-container sterilization. First, for the same germicidal effect, HTST treatments (as in UHT) use less chemicals than cold-long treatment (as in in-container sterilization). This is because Q10, the relative change in the reaction rate with a temperature change of $10^{\circ}C$, is lower than the chemical change during bacterial killing. Based on Q10 values of 3 and 10, the chemical change at $145^{\circ}C$ for the same germicidal effect is only 2.7% at $115^{\circ}C$. The second principle is that the need to inactivate thermophilic bacterial spores (Bacillus cereus and Clostridium perfringens, etc.) determines the minimum time and temperature, while determining the maximum time and temperature at which undesirable chemical changes such as undesirable flavors, color changes, and vitamin breakdown should be minimized.

• The Korean Journal of Pesticide Science
• /
• v.19 no.3
• /
• pp.287-294
• /
• 2015

In Korea, Strawberry bacterial angular leaf spot disease was first reported in 2010. The disease of strawberry caused serious problem for strawberry producers and export. To field test, we applied the bactericides in June and October as nursery stage and cultivation stage, respectively. In nursery stage with high temperature condition, Oxolinic acid (97.2%) showed significant control effect. In cultivation stage with low temperature condition is soil sterilization and soil non- sterilization the control effect. In cultivation stage in soil sterilization stage Validamycin (93.3%) showed reliable control effect against the disease. Also, soil non-sterilization stage with low control effect of Validamycin (80%) showed control effect the lower than a soil sterilization stage.

• Food Science and Preservation
• /
• v.17 no.2
• /
• pp.230-235
• /
• 2010

We investigated the physicochemical quality characteristics of apple juice upon sterilization using hot water, and under various storage conditions. None of sugar content, acidity, or pH differed significantly among various sterilization conditions but chromaticity was considerably reduced in sterilized juice compared with control material. The chromaticity of non-sterilized juice decreased significantly after sterilization compared with material supplemented with vitamin C (0.1%, w/v). Fungi, yeast, and aerobic bacteria were detected in juice sterilized at $65^{\circ}C$ for 10 or 20 min, but no microorganisms were observed in juice sterilized by other procedures. Vitamin C content affected sterilization temperature to a greater extent than sterilization time. When juice was stored at $4^{\circ}C$ or $37^{\circ}C$ for 3 weeks after application of different sterilization conditions, almost no change in acidity, sugar content, or pH was observed, regardless of sterilization mode or storage period. However, chromaticity decreased with longer storage. Vitamin C levels were reduced by higher sterilization temperatures. However, longer storage periods had the greatest effect on reduction of vitamin C levels, which tended toward lower values regardless of differences in sterilization and storage conditions. In sensory evaluation tests, all of taste, color, and overall preference were highest for juice sterilized at $75^{\circ}C$ for 20 min. The ASC value was low at a storage temperature of $4^{\circ}C$ and at high sterilization temperatures, and a long storage period was associated with a greater ASC value. Thus, the quality of apple juice was excellent when juice was hot water-sterilized, with additional vitamin C, at $75^{\circ}C$ for 20 min, followed by storage at $4^{\circ}C$.

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.77-82
• /
• 2012

Sterilization of oak sawdust at $65^{\circ}C$ for Lentinula edodes bed cultivation can be efficient in sterilization facility cost, but its effect on the mushroom production is uncertain due to high contamination probability. The effective conditions for L. edodes hyphal growth in the low temperature sterilized oak sawdust were investigated with combinations of three sterilization temperatures ($65^{\circ}C$, $100^{\circ}C$ and $121^{\circ}C$) and four cultivation temperatures ($15^{\circ}C$, $20^{\circ}C$, $25^{\circ}C$, and $30^{\circ}C$). L. edodes inoculation density effect was also tested with 1 cm, 2 cm, and 4 cm distance in the sawdust (4%, 11% and 25% inoculation rate by surface area). L. edodes hyphal growth in the sawdust sterilized at $65^{\circ}C$ was as much as at those $100^{\circ}C$ and $121^{\circ}C$ when the fungus cultured below $25^{\circ}C$, but it was greatly reduced when cultured at $30^{\circ}C$. And the sawdust medium with 1cm distance inoculation density was fully occupied with L. edodes hyphae, but those with 2~4cm distance inoculation were contaminated by 4~33%. Therefore, we conclude that low temperature sterilized oak sawdust needs to be cultured under $25^{\circ}C$ after sufficient inoculation by 25% for successful bed cultivation of L. edodes.