• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.422-448
• /
• 1996

Low-temperature epitaxial growth of Si and SiGe layers of Si is one of the important processes for the fabrication of the high-speed Si-based heterostructure devices such as heterojunction bipolar transistors. Low-temperature growth ensures the abrupt compositional and doping concentration profiles for future novel devices. Especially in SiGe epitaxy, low-temperature growth is a prerequisite for two-dimensional growth mode for the growth of thin, uniform layers. UHV-ECRCVD is a new growth technique for Si and SiGe epilayers and it is possible to grow epilayers at even lower temperatures than conventional CVD's. SiH and GeH and dopant gases are dissociated by an ECR plasma in an ultrahigh vacuum growth chamber. In situ hydrogen plasma cleaning of the Si native oxide before the epitaxial growth is successfully developed in UHV-ECRCVD. Structural quality of the epilayers are examined by reflection high energy electron diffraction, transmission electron microscopy, Nomarski microscope and atomic force microscope. Device-quality Si and SiGe epilayers are successfully grown at temperatures lower than 600℃ after proper optimization of process parameters such as temperature, total pressure, partial pressures of input gases, plasma power, and substrate dc bias. Dopant incorporation and activation for B in Si and SiGe are studied by secondary ion mass spectrometry and spreading resistance profilometry. Silicon p-n homojunction diodes are fabricated from in situ doped Si layers. I-V characteristics of the diodes shows that the ideality factor is 1.2, implying that the low-temperature silicon epilayers grown by UHV-ECRCVD is truly of device-quality.

• 화훼연구
• /
• 제17권4호
• /
• pp.266-270
• /
• 2009

깽깽이풀의 임의 개회조절을 목적으로 입실시기, 저온처리 등이 맹아, 생장 및 개화 등에 미치는 영향을 살펴보았다. 입실시기에 따라서는 8월 20일부터 12월 20일까지 입실한 묘는 모두 맹아가 되지 않았다. 그러나 1월 20일과 2월 20일에 입실한 묘는 모두 맹아되어 개화되었다. 저온처리 개시시기와 처리기간이 깽깽이풀의 생장과 개화에 미치는 영향을 살펴본 결과는 8월 고온기에는 60일간의 저온을 받게 되면 맹아하여 개화하였다. 그러나 9월 20일 이후에는 30일간의 저온처리만으로도 거의 전개체가 맹아하여 개화하였다. 이미 저온처리를 한번 받아 휴면이 타파된 주를 재차 저온처리를 하여 2차 개화를 유도한 결과, 실험에 사용된 전 개체 모두 재맹아하였고 이중 70%인 7개체가 개화가 되었다.

• 한국해양생명과학회지
• /
• 제7권2호
• /
• pp.213-220
• /
• 2022

본 연구는 저염분 상태에서 수온 및 사육밀도와 같은 환경요인이 흰다리새우(Litopenaeus vannamei)의 성장에 미치는 영향을 조사하기 위하여 수행하였다. 연구 결과, 흰다리새우는 저염분 상태에서 전반적으로 수온이 높을수록 생존율이 높게 나타났고, 사육밀도가 낮을수록 생존율이 높아졌다. 사료효율에 관한 연구에서는 수온이 높을수록 증체량(WG)이 증가하였고, 사육밀도가 증가할수록 증체량은 감소하였다. 수온이 높을수록(수온 31℃) 성장 속도가 빨랐다. 또한 사육밀도에 따른 성장도의 평가에서도 사육밀도가 낮은 상태에서 성장 속도가 빨라지는 것을 확인하였다. 본 연구 결과를 흰다리새우의 최적 성장을 위한 적정 사육밀도 및 사육수온의 결정에 유용하게 적용되리라 사료된다.

• 동력기계공학회지
• /
• 제4권1호
• /
• pp.81-87
• /
• 2000

In this study, CT specimens were prepared from ASTM SA516 Gr. 70 which was used for pressure vessel plates for room and low temperature service. And we got the following characteristics from fatigue crack growth test carried out in the environment of room and low temperature at $25^{\circ}C,\;-60^{\circ}C,\;-80^{\circ}C\;and\;-100^{\circ}C$ and in the range of stress ratio of 0.05 by means of opening mode displacement. At the constant stress ratio, the threshold stress intensity factor range ${\Delta}K_{th}$ in the early stage of fatigue crack growth (Region I) and stress intensity factor range ${\Delta}K$ in the stable of fatigue crack growth (Region II) was increased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm $d{\alpha}/dN\;-{\Delta}K$ in Region II, that is, the fatigue crack growth exponent m increased with descending temperature at the constant stress ratio. It assumed that the fatigue crack growth rate $d{\alpha}/dN$ is rapid in proportion to descend temperature in Region II and the cryogenic-brittleness greatly affect a material with decreasing temperature.

• 한국작물학회지
• /
• 제24권2호
• /
• pp.35-41
• /
• 1979

To observe the effects of temperature and photoperiod on the growth and yield of winter wheat (Triticum aestivum, L) eight varieties including Chang Kwang were tested at various treatments like longday-high temperature (24hrs-20\circ), shortdayhigh temperature (12hrs-20\circ), longday-low temperature (24hrs-14\circ) and shortday-low temperature (12hrs-14\circ). Among the traits measured, days to heading, plant height, spike length, number of spikes per hill and grain yield per hill were generally decreased at high temperature and long day treatment and increased at low temperature and shortday condition. Number of grains per spike was decreased at low temperature and short day condition while increased at longday and high temperature conditions. Grain weight was decreased significantly at high temperature and shortday while increased at low temperature and longday treatment.

• ALGAE
• /
• 제17권2호
• /
• pp.117-125
• /
• 2002

Five microalgal species isolated from the Jeju coast and four microalgal stock strains in hatchery were cultured in order to investigate their adapation to extreme changes in environmental factors such as salinity, water temperatue, adn nutrients. In case of salinity variation, Nitzschia sp. of Bacillariophyceae, Isochrysis galbana of Haptophyceae and Tetraselmis gracilis of Prasinophyceae showed optimum growth at the low salinity of 20 and 25 psu. Amphora coffeaeformis and Chetoceros simplex of Bacillariophyceae, and Pavlova lutheri of Haptophyceae adapted well at the relatively high salinities of 30 and 35 psu. However Phaeodactylum tricornutum of Bacillariophyceae and Chlorella sp. of Chlorophyceae showed euryhaline property In case of water temperature variation, most of all the species studied wer inhibited at 10℃. C. simplex, Nitzschia sp., p. tricornutum, Chlorella sp. and T. gracilis grew well at above 20℃. A. coffeaeformis, I. galbana and P. lutheri adapted also at the high temperature of 30℃. Each microalgal strain showed different growth rates and its maximum biomass. Generally microalgal populations from the Jeju coast grow well in relatively high salinity and high water temperature. Their growth were inhibited at low water temperature, but not likely affected at low salinity. This study indicates that the microalgal populations could not be affected by abnormally low salinity phenomena, which have happened occasionally around the west Jeju coast in summer and have led macrobenthic animals to mass mortality.

• 한국식품영양과학회지
• /
• 제24권4호
• /
• pp.631-635
• /
• 1995

In order to develop effective manufacturing method and to improve quality of low-salt fermented squid(10% of table salt), we investigated the effects of temperature, salinity and pH on the growth of Staphylococcus xylosus, Micrococcus varians, Pseudomonas diminuta and Pseudomonas D2 isolated from of low-salt fermented squid and the growth characteristics of these bacteria during fermentation were elucidated. All bacteria showed good growth during the process of low-salt fermented squid(pH 6~7 ; concentration of NaCl, 7~10% ; temperature, 7~1$0^{\circ}C$) and their cell numbers increased as fermentation proceeded under the same fermentation condition.

• 한국작물학회지
• /
• 제48권5호
• /
• pp.397-401
• /
• 2003

This experiment was conducted to know the characteristics of kernel growth as affected by various temperature regimes during grain filling using the varieties Hwaseongbyeo, Ilpumbyeo and Chucheongbyeo. The rice plants tested were grown in the natural condition at 1/5000a Wagner pots until flowering. After flowering, the rice plants were moved to controlled temperature conditions in a phytotron. The minimum/maximum daily temperature in the phytotron was controlled by 12/18, 15/21, 18/24, 21/27, and 24/$30^{\circ}C$, respectively. The grain weights were measured every three days after treatment. The mean daily kernel growth rate during active grain filling period showed different responses among varieties under various temperature regimes. The kernel growth rate of Chucheongbyeo was seriously reduced as temperature regimes were decreased. However, that of Ilpumbyeo was not influenced so critically. Ilpumbyeo showed some advantages in grain filling under low temperature regimes compared to Chucheongbyeo. The lag phase in grain filling of Chucheongbyeo was the longest among tested varieties, followed by Hwaseongbyeo under daily mean temperature regime of $15^{\circ}C$. Kernel weight of Ilpumbyeo increased fast in early grain filling phase under low temperature. This characteristic may be favorable for grain filling in temperate zone where the daily mean temperature is drastically dropped during grain filling period. Regression analysis with kernel growth rate and temperature showed the estimated critical low temperature for grain filling among varieties were $9^{\circ}C$, $12^{\circ}C$, $13^{\circ}C$ in Ilpumbyeo, Hwaseongbyeo and Chucheongbyeo, respectively. Under moderate temperature the duration of grain filling of Ilpumbyeo was longer than that of Chucheongbyeo. However, Under low temperature that of Ilpumbyeo was more favorable than Chucheongbyeo.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.264-268
• /
• 2001

In this study, CT specimens were prepared from spring steel(SUP9) processed shot peening which was room temperature, low temperature and high temperature experiment. And we got the following characteristics from fatigue crack growth test carried out in the environment of room, and high temperature at $25^{\circ}C,\; 50^{\circ}C, \;100^{\circ}C,\; 150^{\circ}C,\; and\; 180^{\circ}C$ in the range of stress ratio of 0.05 by means of opening mode displacement. The threshold stress intensity factor range $\DeltaK_{th}$ in the early stage of fatigue crack growth (Region I ) and stress intensity factor range $\Delta$K in the stable of fatigue crack growth (Region II) was decreased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature and high temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region.

• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.58-64
• /
• 2004

The purpose of this study is to predict the behavior of fatigue crack propagation as one of fracture mechanics on the compressive residual stress. We got the following characteristics from fatigue crack growth test carried out in the environment of room temperature and low temperature at $25^{\circ}C$, -6$0^{\circ}C$, -8$0^{\circ}C$, and -10$0^{\circ}C$ in the range of stress ratio of 0.3 by means of opening mode displacement. There is a difference between shot peened specimen and unpeened specimen. Fatigue crack growth rate of shot peened specimen was lower than that of unpeened specimen. Shot peening is improve the resistance of crack growth by fatigue that make a compressive residual stress on surface. That is the constrained force about plasticity deformation was strengthened by resultant stress, which resulted from plasticity deformation and compressive residual stress in the process of fatigue crack propagation. Temperature goes down, fatigue crack growth rate decreased.