• Korean Journal of Ecology and Environment
• /
• v.50 no.3
• /
• pp.355-361
• /
• 2017

In this study, we investigated the response of freshwater oligochaete, Tubifex tubifex, to the water temperature changes and the differences of substrate composition in a laboratory condition. The changes of body shape were observed in a test cage according to the water temperature change ranging from $10^{\circ}C$ to $30^{\circ}C$ with $2^{\circ}C$ interval every 10 minutes. The substrate preference was observed with four different substrate composition from silt-clay to coarse sand. Our results displayed that T. tubifex preferred substrates with the smallest particle size (<0.063 mm). The water temperature influenced on the activity and body shape of T. tubifex, showing low activity with the coiled and constricted body shapes at lower temperature and high activity with relaxed linear body shapes at higher temperature.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.11
• /
• pp.1096-1103
• /
• 2009

The predictions of the material behavior for the structural stability of thrust chamber mixing head at very-low temperatures are very important since the head is highly pressurized by the liquid oxygen with very-low temperatures and experiences impact load by the thrust of combustion chamber. The constitutive equation to express tensile deformation behavior of the material at very-low temperature to predict deformation behavior of the mixing head is formulated by composition of thermal component and athermal component based on dislocation energy barrier model suggested by Kocks. Also, increase of thermal stress components by the increase of obstacles at low temperatures is formulated to the equation similar with Ramberg-Osgood equation. The suggested model predicted well the material's behavior at the wide temperature ranges from very-low temperature to ambient temperature.

• Textile Coloration and Finishing
• /
• v.26 no.4
• /
• pp.331-338
• /
• 2014

In this research, split-type complex yarn of 20:80, 40:60, 50:50 nylon6/polyester composition ratio was used in order to impose unique sense on split-type complex woven. After treating both split-type complex yarn of each ratio and its produced woven in alkali solution, we got the following results by checking physical properties based on alkali proportion and treatment time. Under the condition of NaOH 20% in this experiment, it took approximately double time 20% loss of weight. The loss of weight became high when polyester proportion of N/P(nylon6/polyester) composition ratio was low, in the same fineness yarn. Even though polyester proportion was low, the loss of weight was low when the fineness was high. N/P division was well processed at about 25% loss of weight under the condition of NaOH 20%, treatment temperature $50^{\circ}C$, and treatment time 60 minutes. The research provides that the loss of weight should be processed around treatment time 24 hours in the case of NaOH concentration 15%, and treatment time 15 hours in the case of NaOH concentration 18%, respectively, in order to achieve N/P woven division ratio of about 70%-80% in industrial fields.

• Journal of the Korean Society for Heat Treatment
• /
• v.37 no.1
• /
• pp.1-8
• /
• 2024

Phase stability of tetragonal crystals in yttria-stabilized zirconia ceramics is dependent on the content of yttria and the heat-treatment condition, related with mechanical properties. In this study, we fabricated the 1.5 mol% yttria-stabilized zirconia (1.5Y-YSZ) ceramics by cold isostatic pressing (CIP) and post-sintering at temperature range of 1200 to 1350℃ for 2 hours and investigated the sintered properties and microstructural evolution. Sintered and microstructural parameters, i.e, apparent density, grain size and phase composition of 1.5Y-YSZ ceramics were mainly dependent on the sintering temperature. Maximum sintered density of 99.4 % and average grain size of 200-300 nm could be obtained from the heat-treatment condition above sintering temperature at 1300℃ for 2 hours, possessing the superior mechanical hardness with 1200 Hv. However, phase stability of tetragonal grains in 1.5 YSZ ceramics is very low, inducing the phase transformation to monoclinic crystals on specimen surface during cooling after heat-treatment.

• Journal of Electrochemical Science and Technology
• /
• v.15 no.2
• /
• pp.220-241
• /
• 2024

Due to its unique advantages, electrochemical machining (ECM) is playing an increasingly significant role in the manufacture of difficult-to-machine materials. Most of the current ECM research is conducted at room temperature, with studies on ECM in a cryogenic environment not having been reported to date. This study is focused on the electrochemical dissolution characteristics of typical iron and nickel base alloys in NaNO₃ solution at low temperature (-10℃). The polarization behaviors and passive film properties were studied by various electrochemical test methods. The results indicated that a higher voltage is required for decomposition and more pronounced pitting of their structures occurs in the passive zone in a cryogenic environment. A more in-depth study of the composition and structure of the passive films by X-ray photoelectron spectroscopy and electrochemical impedance spectroscopy showed that the passive films of the alloys are modified at low temperature, and their capacitance characteristics are more prominent, which makes corrosion of the alloys more likely to occur uniformly. These modified passive films have a huge impact on the surface morphologies of the alloys, with non-uniform corrosion suppressed and an improvement in their surface finish, indicating that lowering the temperature improves the localization of ECM. Together with the cryogenic impact of electron energy state compression, the accuracy of ECM can be further improved.

• Journal of the Korean Electrochemical Society
• /
• v.23 no.1
• /
• pp.18-23
• /
• 2020

Antimony telluride (Sb_xTe_y) thin films were synthesized by an electrodeposition method with a control of applied potential at room temperature. Characterization of electrical and thermoelectric properties such as conductivity, Seebeck coefficient, and power factor (P.F.) were conducted as a function of the chemical composition of the electrodeposited films. Morphology of thin films were dense and uniform and the composition was tailored from 25 to 60 at.% of the Sb content by altering the applied potential from -0.13 to -0.27 V (vs. SCE). The conductivity of the films were ranged from 2 × 10^-4 ~ 5 × 10^-1 S/cm indicating their amorphous behavior. The meaured Seebeck coefficient of films were relatively high compared to that of bulk single cyrstal Sb_xTe_y due to their low carrier concentration. The variation of the Seebeck coefficient of the films was also related to the change of chemical composition, showing the power factor of ~10 ㎼/mK².

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.869-873
• /
• 2002

$Cu_2ZnSnS_4$ (CZTS) thin film is one of the candidate materials for the solar cell. It has an excellent optical absorption coefficient as well as appropriate 1.4~1.5eV band gap. The purpose of this study is replacing a half of high-cost Indium(In) atoms with low-cost Zinc(Zn) atoms and the other half with low-cost Tin(Sn) atoms in the lattice of CIS. In annealing process of thin films deposited with mixture target, the thin films were appeared the peeling. The resistivity was decreased. Thin films were deposited on ITO glass substrates using a compound target which were made by $CU_2S$, ZnS, $SnS_2$ powder were sintered in the atmosphere of Al at room temperature by rf magnetron sputtering We investigated potentialities of a low-cost material for the solar cell by measuring of thin film composition, the structure and optical properties. We could get an appropriate $Cu_2ZnSnS_4$ composition A (112) preferred orientation was appeared without annealing temperature as shown in the diffraction peaks of the CIS cells and was available for photovoltaic thin film materials. The band gap increased from 1.4 to 1.7eV as the composition ratio of Zn/Sn.. The optical absorption coefficient of the thin film was above $10^4cm^{-1}$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.4
• /
• pp.344-348
• /
• 2009

This study was conducted to investigate effects of dietary lipid level on growth and body composition of juvenile red sea bream in low temperatures. Duplicate groups of fish (initial body weight of 79 g) were fed one of three isonitronic diets (47% crude protein) containing different lipid levels (10%, 17% and 22%) for 25 weeks during the winter season. Weight gain and survival of fish fed 17% lipid diet were significantly (P<0.05) higher than those fish fed the 10% or 22% lipid diet. Protein efficiency ratio, daily feed intake, condition factor, hepatosomatic index and viscerasomatic index were not affected by dietary lipid level, but feed efficiency of fish fed 10% lipid diet was significantly (P<0.05) lower than those fish fed the 17% or 22% lipid diet. Proximate composition of the whole body, liver, viscera and dorsal muscle were not significantly different among all groups except for crude protein content of dorsal muscle. The contents of 16:0, 18:0, 20:4n-3 and 20:5n-3 of the whole body were significantly (P<0.05) affected by dietary lipid level. The results of this study suggest that an increased dietary lipid level from 10% to 17% can improve growth of juvenile red sea bream in low temperature periods.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.4
• /
• pp.567-575
• /
• 2015

Species composition in the coastal waters off Ulleungdo of Korea were examined based on catches bimonthly collected by trammel net in 2013. A total of 711 individuals and 181.9 Kg were caught and catches were composed of 4 classes 15 orders 27 families 52 species including 44 Pisces, 4 Gastropoda, 3 Cephalopoda, and 1 Echinodermata. The dominant species in biomass were File fish (Thamnaconus modestus), Atka mackerel (Pleurogrammus azonus), and Greenling (Hexagrammos otakii). Data were summarized using hierarchical cluster analysis (HCA) and detrended correspondence analysis (DCA) to examine similarity in species composition for each month, and community structure in Ulleungdo was divided into two groups. Community structures in February, April and December with low temperature and well-mixed surface water were distinguished from those in June, August and October with high temperature and strong stratification, which could be attributed to temporal changes in dominant species. Atka mackerel and Spear squid mainly caught in February and April, disappearing in June, August and October, and File fish outburst was shown in October. Because the water off Ulleungdo has been under low human pressure, it could be a good case study to elucidate effects of climate change on community structure and ecosystem in the East sea. Continuous surveys and further studies are required to demonstrate migration route and distribution of dominant species and long-term changes in community structure in the water of Ulleungdo.

• Applied Biological Chemistry
• /
• v.36 no.4
• /
• pp.304-309
• /
• 1993

The composition of soluble neutral carbohydrates in jerusalem artichoke tubers was measured and compared according to harvest dates and storage temperatures using HPLC. The breakdown of inulin $({\ge}GF8)$ into sucrose and fructo-oligosaccharides (GF2-GF7) was highest on November just after cold-shock. The composition of sucrose and fructo-oligosaccharides on March was much higher than that on September of previous year. Inulin $({\ge}GF8)$ proportion decreased from 66.4% to 33.1% but the proportion of fructo-oligosaccharides (GF2-GF7) and sucrose increased from 25% to 61% and from 3.4% to 13.6%, respectively. The storage at a low temperature $(4^{\circ}C)$ for 34 days increased the composition as well. However, the amount of fructo-oligosaccharides was decreased when the tubers harvested in March were stored at high temperature $(25^{\circ}C{\sim}40^{\circ}C)$. For the maximam yield of fructo-oligosaccharides in jerusalem artichoke, it is concluded that the tubers be harvested in March and/or stored at the low temperature.