• 한국전기전자재료학회논문지
• /
• 제29권8호
• /
• pp.476-482
• /
• 2016

Convectional PZT based piezoelectric ceramics have to sinter at high temperature about $1,200^{\circ}C$ for their suitable electrical properties. However, some issues: low temperature sintering piezoelectric ceramic composition and reliable internal electrode, have recently attracted a great deal of interest as a highly efficient multi-layered piezoelectric ceramics. In order to optimize low temperature sintering conditions of thick-film PMN-PZ-PT ceramic, it was investigated sintering and piezoelectric properties according to the change of $LiBiO_2$ contents. Thus, the superior piezoelectric properties were found at the pallet type PMN-PZ-PT optimized with low sintering processing at $925^{\circ}C$ including 7 wt% $LiBiO_2$ sintering aid. Consequentially, we successfully manufactured thick-film PMN-PZ-PT ceramics, which had superior piezoelectric and dielectric properties, with 5 wt% of $LiBiO_2$ sintering aid at temperature of $900^{\circ}C$.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2007년도 추계학술대회 논문집
• /
• pp.159-160
• /
• 2007

저온 플라즈마 침탄 처리 후 연속적인 공정으로 저온 플라즈마 질화를 실시하여 내식성과 표면경도를 향상시키는 처리에서 질화처리 시 Ar 가스가 표면특성에 미치는 영향을 조사 하였다. 모든 시편의 경도가 미처리재 보다 약4배 증가하였으며, Ar가스의 양이 증가할수록 N의 침투깊이가 깊어졌다. 전체 경화증의 두께는 거의 일정하였고, 경화층은 모재보다 내식성이 증가되어 단면조직사진에서 밝게 나타났다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.51-51
• /
• 2009

In order to understand the properties of high heat input welds made by electro gas welding, two kinds of low temperature steel were welded. Welding heat inputs were controlled by width of root gap and ranged from 118 to 143kJ/cm. Chemical composition and micro-structural analysis were performed. To understand low temperature impact properties, Charpy impact test was conducted at several temperatures. The results were summarized as follows; 1) Grain size of weld metal and heat affected zone was increased with an increase in welding heat input. 2) Impact test values at fusion line were severely fluctuated regardless of base metals, showing enormous difference among the values at the same test temperature.

• Journal of Biosystems Engineering
• /
• 제30권4호
• /
• pp.235-241
• /
• 2005

For better and large utilization of rice husk, the production and consumption status, differences in chemical composition and heating value due to region and variety, and thermogravimetric characteristic of rice husk were studied. In addition, the differences in chemical composition due to region and variety and the crystallization characteristic of rice husk ash were also studied. Approximately 800,000 M/T of rice husk was produced per year in Korea, which is about $18\%$ of the paddy production by weight. Noticeable varietal and regional difference pattern in chemical composition was not found among the domestic rice husk samples. Their average ash content and higher heating value were $16.4\%$ and 16,660 kJ/kg by dry basis, respectively. A relation seemed to exist between the carbon content and higher heating value. Noticeable difference pattern in chemical composition was not found among the domestic rice husk ash samples. The $SiO_2$ contents were a little low, the maximum being $92.9\%,$ and the contents of major components such as CaO, MgO, and $K_2O$ were also lower compared with foreign rice husk ash due to the deficiency of compost matters in domestic soils. Thermogravimetry study showed the thermal decomposition of rice husk started at about $250^{\circ}C,$ followed by relatively fast combustion of combustible gas until the temperature rose to $350^{\circ}C.$ After $350^{\circ}C,$ combustion of the carbon component proceeded relatively slowly as the temperature increased. Therefore, the ignition temperature of the rice husk could be estimated around $300^{\circ}C$. Crystallization of $SiO_2$ in the rice husk ash was found from the combustion temperature of $750^{\circ}C$ and became distinctly when the combustion temperature exceeded $900^{\circ}C$. The ash became darker with $SiO_2$ crystallization.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.225-230
• /
• 2004

Volatile organic compounds (VOCs) are low calorific value gases (LCVG) emitted from chemical processes such as painting booth, dye works and drying processes etc. Characteristics of VOCs are low calorific values less than 150 kcal/$m^3$, high activation energy for ignition and low energy output. These characteristics usually make combustion unstable and its treatment processes needs high-energy consumption, The cyclone combustion system is suitable for LCVG burning because it can recirculate energy through a high swirling flow to supply the activation energy for ignition, increases energy density to make a combustion temperature higher than usual swirl combustor and also increases mixing intensity, This research was conducted to develop optimized cyclone combustion system for thermal oxidation of VOCs. This research was executed to establish the effect of swirl number with respect to the combustion temperature and composition of exhausted gas in the specific combustor design.

• 박물관보존과학
• /
• 제29권
• /
• pp.65-80
• /
• 2023

본 연구는 통일신라 하대 전돌 유약의 재료학적 특성을 파악하기 위하여 포항 법광사지 출토 납유 전돌 7점을 조사하였다. 유약의 표면과 단면을 현미경으로 관찰하여 다양한 수화양상을 확인하고 이를 표면층·수화층A·수화층B·녹색층으로 분류하였다. 이들 각 층의 화학조성을 주사전자현미분석으로 측정한 결과, 수화의 영향이 가장 적은 녹색층이 원 조성으로 추정된다. 이 녹색층은 주성분이 PbO와 SiO₂가 8 : 2의 비율로 나타나고 주요 발색원소인 CuO를 약 2% 내외로 함유한 저화도 유약이다. 녹색층은 경상도 납유 전돌의 기 분석된 주성분 자료들과 비교 검토하여 법광사지 납유 조성이 사천왕사지, 천룡사지, 부석사지 바닥전과 유사함을 밝혀냈다.

• 한국세라믹학회지
• /
• 제30권5호
• /
• pp.381-388
• /
• 1993

Due to the anisotropy of thermal expansion, LAS system which has low thermal expansion property is hard to obtain a dense sintered body. Therefore, the thermal expansion coefficient and the mechanical strength were decreased. In this study, mullite, which has good mechanical properties in high temperature and comparatively low thmeral expansion coefficient, was taken as a additive in LAS system. And then, sintering, thermal, and mechanical properties were investigated. The results are follows; When mullite is added in eucryptite composition (Li2O.Al2O3.2SiO2) of LAS system, the creation of liquid phase results in the densification of sintered body and the specimen sintered at 136$0^{\circ}C$ for 2 hours shows optimum sintering condition. With the addition of mullite in eucryptite composition, mechanical strength is increased by the control of grain growth. Especially, flexual strength of EM0 specimen was about double value than the basic composition. Thermal expansion coefficients of EM0 and EM15 specimens sintered at 136$0^{\circ}C$ were -8.23$\times$10-6/$^{\circ}C$ and -4.90$\times$10-6/$^{\circ}C$ in the temperature range of RT.~80$0^{\circ}C$. As the mullite content are increased, negative thermal expansion ratios are decreased.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권1호
• /
• pp.94-101
• /
• 2004

The gross composition, gross amino acid content, apparent ileal amino acid digestibility and apparent ileal digestible amino acid content from 64 commercially produced meat and bone meals were statistically analysed. The samples were produced by 22 plants over a 2.5 year period with eight plants using batch dry rendering and 14 plants using low temperature rendering. A linear model with method and time of year (period) as fixed effects, plant within method as a random effect and sheep percent as a covariate was fitted to the composition data. The majority of the variation in the gross composition, amino acid digestibility and digestible amino acid content was explained by differences between plants using the same method. Neither rendering season nor origin of the raw materials contributed significantly to the observed variation in meat and bone meal protein quality. Rendering method (low temperature or batch rendering) had a significant effect on the variation observed in gross fat content, gross energy content, pepsin nitrogen digestibility, protein solubility and total lanthionine content. The digestibility of a number of amino acids and the apparent digestible content of arginine, cysteine, aspartic acid, proline and hydroxyproline were also significantly affected by rendering method. On average, batch dry and low temperature rendering systems produce meat and bone meals of similar nutritional quality. The variation between plant and within plant, however, is large, indicating that purchasing meat and bone meal from the same plant does not guarantee a consistent quality.

• 한국군사과학기술학회지
• /
• 제20권4호
• /
• pp.514-519
• /
• 2017

To develop a gun propellant composition with high insensitivity and high energy, we formulated a composition by adding RDX into the nitrocellulose(NC) based propellant. The flame temperature of the RDX added NC(RAN) propellant was higher than that of neat NC propellant. The kinetic muzzle energy of RAN propellant was close to that of JA2 propellant at room temperature($21^{\circ}C$). The difference of kinetic muzzle energy of RAN propellant between high and room temperature settings as well as between a low and room temperature settings were less compared to those of JA2 propellant.

• 한국분무공학회지
• /
• 제9권1호
• /
• pp.15-20
• /
• 2004

The post injection effect to enhance aftertreatment devices' performance is essential to meet future stringent emission standards by controlling exhaust gas temperature and emission pollutants. The test has been made with commercial common rail diesel engine by post injection manipulation, to optimize exhaust gas temperature while guarantee low fuel penalty. The optimization was done at 1500, 2000 and 2500[rpm] for 2, 4[bar] condition which show low exhaust gas temperature. The main purpose of this test is dedicated to understand mechanism of exhaust gas temperature rise while optimizing