• 청정기술
• /
• 제22권4호
• /
• pp.299-307
• /
• 2016

These days, coal is one of the most important energy resources used for transportation, industry, and electricity. There are two types of coal: high-rank and low-rank. Low-rank coal has a low calorific value and contains large amounts of useless moisture. The quality of low-rank coal can be increased by simple drying technology and it needs to be stabilized by hydrocarbons (e.g. palm acid oil, PAO) to prevent spontaneous combustion and moisture re-adsorption. Spontaneous combustion becomes a major problem during coal mining, storage, and transportation. It can involve the loss of life, property, and economic value; reduce the quality of the coal; and increase greenhouse gas emissions. Besides spontaneous combustion, moisture re-adsorption also leads to a decrease in quality of the coal due to its lower heating value. In this work, PAO was used for additive to stabilize the upgraded coal. The objectives of the experiments were to determine the stabilization characteristic of coal by analyzing the behavior of upgraded coal by drying and PAO addition regarding crossing-point temperature of coal, the moisture behavior of briquette coal, and thermal decomposition behavior of coal.

• 플랜트 저널
• /
• 제8권4호
• /
• pp.34-39
• /
• 2012

석탄화력발전소에서 저품위탄 연소시 통풍저항 변화로 인해 승압송풍기의 운전점에 영향을 주는 것을 분석하여 현재운전점 대비 실속시점을 예측하였다. 연료의 발열량이 낮을수록 통풍저항 증가 속도가 빨라지며, 통풍저항과 승압송풍기의 운전점과는 강한 상관관계가 있음을 확인하였다. 발열량이 낮을수록 통풍저항이 빨리 상승하며 이는 곧 승압송풍기의 운전점이 설계탄 대비해서 실속 한계운전점에 빨리 도달하게 된다. 이를 근거로 현재운전점 대비 한계운전점까지의 운전여유분과 발열량별 통풍저항 증가 속도를 계산하여 실속시점을 예측할 수 있어 송풍기 실속으로 인한 발전출력의 감소나 운전정지에 대비한 정비계획 수립 등 안정운전에 많은 도움이 될 것으로 예상한다.

• 자원환경지질
• /
• 제21권1호
• /
• pp.97-106
• /
• 1988

The purpose of this study is to collect basic data which are prerequisite for quantitative analysis of coal logging data. The study involves laboratory measurements of physical properties such as seismic velocities (P,S-waves), resitivity and density of domestic and imported foreign coals. The relationships between these properties were analyzed by using cross-plots. Correlation between the physical properties of coal and the results of chemical analysis (calorie, fixed carbon, ash, moisture, volatile matter and sulfur contents) was also studied to obtain ideas about coal quality analysis using logging data. Summarized results are as follows: 1. $V_P$ is exponentialy related to $V_S$. And the average value of $V_P$ is about l.8 times as large as $V_S$. 2. Since coal has very low density compared with surrounding sedimentary rocks, density logging is appeared to be the best method for identifying coal seams and evaluating their qualities. 3. For the case of domestic coals, the ash contents and calorie show a perfect inverse relationship. Since the density increases as increase of ash content with a well-defined functional form, the ash content of domestic coals can be estimated by density measurements. 4. Because of low ash content, low density and high resistivity, foreign coals and domestic lignites are easily distinguished from domestic coals.

• Agricultural and Biosystems Engineering
• /
• 제3권2호
• /
• pp.79-84
• /
• 2002

The seawater involving diverse chemical elements was mixed with wasted coals to improve the quality. The thermal and chemical characteristics of these seawater-mixed coals were investigated and compared with those of original coals. The contents of MgO, $Na_2O$, and $K_2O$ were increased by mixing seawater in wasted coals. The content of $Na_2O$ in these coal samples was greatly increased due to the sodium, which was the main component of seawater. Thus, it was expected that fusion temperatures of these coal samples were decreased. Coal samples mixed with seawater showed that the rapid weight loss was started at the lower temperature than those of original coal samples. In these coal samples, the temperatures of maximum heat emission were lowered by average $61^{\circ}C.$. Thus, it is suggested that some chemical constituents of the seawater act an important role on lowering the ignition temperature of wasted coal. By mixing seawater into wasted coals, the calorific values were increased. Especially, calorific values were greatly increased in the coal samples of lower quality as Baksan A and B with the improvement of 15~20%.

• 한국응용과학기술학회지
• /
• 제39권2호
• /
• pp.368-376
• /
• 2022

자연발화 현상은 산업현장 또는 우리 생활 속 어디에서나 발생하며 물질이 대기 중에서 점화원 없이 스스로 발화되는 현상이다. 화학반응 속도가 빨라져 발생하는 열이 증가하게 되어 자연발화의 위험성은 더욱 커진다. 본 연구에서는 식품과 화장품 소재로 이용되는 안전한 원료를 배합하여 다양한 자연발화 현상 중 특히 석탄 자연발화 방지제를 제조하였다. 인도네시아산 저열량, 저급탄에 대한 Lab과 Field Test를 통하여 석탄 자연발화 억제 효과를 확인하였다. 옥외 현장 테스트 결과, 비교군(90일 후 발화)에 비하여 본 연구에서 제조한 발화방지제는 120일 이상 우수한 자연 발화억제 효과를 나타내었으며 실내저탄장에서 50일 동안의 CO의 농도변화를 비교하여 CO 농도 제어 효과를 확인하였다. 비교군인 석탄, 기존의 발화 방지 방법보다 우수한 결과를 확인하였다. 또한, 환경을 고려한 토양 및 수질 시험, 작업 근로자를 고려한 발화방지제의 MSDS, 수질, 안 자극 등의 공인시험을 통하여 환경과 근로자 작업환경의 안전성 등을 연구하여 2024년부터 적용되는 실내저탄장용 석탄 발화방지제의 가능성을 확인할 수 있었다.

• 대한화학회지
• /
• 제4권1호
• /
• pp.78-80
• /
• 1957

Up to now, only superficial studies on the combustion velocity of smokeless fuels have been reported, while it should be a basical factor on the utilization of low quality coals and some other smokeless solid fuels. It was, therefore, difficult to choose raw material coals in manufacturing gaseous fuels. With the intent to solve above problem, we have determined combustion velocity of domestic anthracites, graphites, coalites of lignite and cokes from Japanese bituminous coal. The results show that the cokes from Japanese bituminous coal which has been used as raw material in the manufacturing gaseous fuels such as water gas, or producer gas in Korea can be replaced by some sources of domestic anthracite or coalite of lignite.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 INTERNATIONAL SYMPOSIUM ON SOIL & GROUNDWATER ENVIRONMENT
• /
• pp.59-61
• /
• 2005

In Korea, hundreds of abandoned and closed coal and metallic mines are present in the steep mountain valleys due to the depression of the mining industry since the late 1980s. From these mines, enormous amounts of coal waste were dumped on the slopes, which causes sedimentation and acid mine drainage (AMD) to be discharged directly into streams causing detrimental effects on soil and water environments. A limestone slurry by-product (lime cake) is produced from the Solvay process in manufacturing soda ash. It has very fine particles, low hydraulic conductivities ($10^{-8}{\sim}10^{-9}cm/sec$), high pH, high EC due to the presence of CaO, MgO and $CaCl_2$ as major components, and traces of heavy metals. Due to these properties, it has potential to be used as a neutralizer for acid-producing materials. A field plot experiment was used to test the application of lime cake for reclaiming coal wastes. Each plot was 20 x 5 m (L x W) in size on a 56% slope. Treatments included a control (waste only), calcite ($CaCO_3$), and lime cake. The lime requirement (LR) for the coal waste to pH 7.0 was determined and treatments consisted of adding 100%, 50%, and 25% of the LR. The lime cake and calcite were also applied in either a layer between the coal waste and topsoil or mixed into the topsoil and coal waste. Each plot was hydroseeded with grasses and planted with trees. In each plot, surface runoff and subsurface water were collected. The lime cake treatments increased the pH of coal waste from 3.5 to 6, and neutralized the pH of the runoff and leachate of the coal waste from 4.3 to 6.7.

• 자원리싸이클링
• /
• 제29권2호
• /
• pp.37-47
• /
• 2020

베트남은 화력발전을 중심으로 한 발전용량 확보 계획을 추진 중이며, 석탄화력발전소로부터 배출되는 석탄재의 대량처리 방안 확보가 시급한 실정이다. 이 연구는 베트남에서 발생하는 석탄재 중 미연탄소 함량이 높아 재활용이 어려운 저품위 비산재의 미연탄소 함량을 국제 비산재 활용기준인 6% 미만으로 낮추는 것을 목표로 하였다. 저품위 비산재를 배출하는 발전소의 비산재 품질을 조사한 결과, 비산재의 미연탄소 함량은 5.3~23.6%로 미연탄소 함량이 높고 불규칙하였다. 공기분급과 정전선별을 적용하여 비산재를 처리한 결과, 미연탄소 함량 9.8%까지는 분급 단일공정으로, 23.6%까지의 비산재는 분급과 정전선별로 구성된 복합공정으로 미연탄소 함량을 6% 미만으로 감소시킬 수 있었다.

• Safety and Health at Work
• /
• 제5권4호
• /
• pp.203-209
• /
• 2014

Background: Coal mining is of significant economic importance to the Australian economy. Despite this fact, the related workforce is subjected to a number of psychosocial risks and musculoskeletal injury, and various psychological disorders are common among this population group. Because only limited research has been conducted in this population group, we sought to examine the relationship between physical (pain) and psychological (distress) factors, as well as the effects of various demographic, lifestyle, and fatigue indicators on this relationship. Methods: Coal miners (N = 231) participated in a survey of musculoskeletal pain and distress on-site during their work shifts. Participants also provided demographic information (job type, age, experience in the industry, and body mass index) and responded to questions about exercise and sleep quality (on-and off-shift) as well as physical and mental tiredness after work. Results: A total of 177 workers (80.5%) reported experiencing pain in at least one region of their body. The majority of the sample population (61.9%) was classified as having low-level distress, 28.4% had scores indicating mild to moderate distress, and 9.6% had scores indicating high levels of distress. Both number of pain regions and job type (being an operator) significantly predicted distress. Higher distress score was also associated with greater absenteeism in workers who reported lower back pain. In addition, perceived sleep quality during work periods partially mediated the relationship between pain and distress. Conclusion: The study findings support the existence of widespread musculoskeletal pain among the coal-mining workforce, and this pain is associated with increased psychological distress. Operators (truck drivers) and workers reporting poor sleep quality during work periods are most likely to report increased distress, which highlights the importance of supporting the mining workforce for sustained productivity.

• Advances in concrete construction
• /
• 제5권3호
• /
• pp.289-301
• /
• 2017

The synergistic interactions of supplementary cementitious materials (SCMs) with ordinary portland cement (OPC) in multi-blended systems could enhance the mechanical and durability properties of concrete and increase the amount of cement that can be replaced. In this study, the characteristics of the hydration products as well as paste microstructure of blended cement containing 20% coal fly ash, 10% rice hull ash and 10% sugar mill lime sludge in quaternary blended system was investigated. Portlandite content, hydration products, compressive strength, pore size distribution and microstructural architecture of hydrated blended cement pastes were examined. The quaternary blended cement paste showed lower compressive strength, reduced amount of Portlandite phases, and higher porosity compared to plain hardened cement paste. The interaction of SCMs with OPC influenced the hydration products, resulting to the formation of ettringite and monocarboaluminate phases. The blended cement paste also showed extensive calcium silicate hydrates and calcium aluminate silicate hydrates but unrefined compared to plain cement paste. In overall, the expected synergistic reaction was significantly hindered due to the low quality of supplementary cementitious materials used. Hence, pre-treatments of SCMs must be considered to enhance their reactivity as good quality SCMs can become limited in the future.