• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.191-198
• /
• 2008

6LoWPAN (IPv6 Low-power Wireless Personal Area Network) is IPv6 packets transmission technology at Sensor network over the IEEE 802.15.4 Standard MAC and Physical layer. Adaptation layer between IP layer and MAC layer performs fragmentation and reassembly of packet for transmit IPv6 packets. RFC4944, IETF 6LoWPAN WG standard document define packet fragmentation and reassembly. In this paper, we propose the 6PASim (6LoWPAN Packet Simulator) to perform IPv6 packet fragmentation and reassembly for performance evaluation. The 6PASim consist of two parts. One is Packet_Transmit_module that makes IEEE 802.15.4 frames the IPv6 packet from upper layer, and transmit its. and the another is Packet_Receive_module that reassembles transferred frames and completes original IPv6 packets. we can evaluate frame transmit rate and amount of control message through 6PASim. The result of simulation shows the SRM (Selective Retransmission Method) scheme provider better performance than IRM (Immediate Retransmission Method) scheme.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.225-231
• /
• 2020

In this paper, we propose a method to accelerate BWN based on FPGA with limited resources for embedded system. Because of the limited number of logic elements available, a single computing unit capable of handling Conv-layer, FC-layer of various sizes must be designed and reused. Also, if the input feature map can not be parallel processed at one time, the output must be calculated by reading the inputs several times. Since the number of available BRAM modules is limited, the number of data bits in the BWN accelerator must be minimized. The image classification processing time of the BWN accelerator is superior when compared with a embedded CPU and is faster than a desktop PC and 50% slower than a GPU system. Since the BWN accelerator uses a slow clock of 50MHz, it can be seen that the BWN accelerator is advantageous in performance versus power.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.485-486
• /
• 2007

Wireless Sensor Networking is state of the art technology that has a wide range of potential applications. Sensor network generally consists of a large number of distributed nodes that organize themselves into a multi-hop wireless network. Each node has one or more sensors, embedded processors and low-power radios, and is normally battery operated because of small size. In this paper wireless sensor networking technology applies to the environment monitoring system in the underground. This system can monitor a pollution level of the underground in realtime for keeping up a comfortable environment.

• Journal of Communications and Networks
• /
• v.14 no.2
• /
• pp.162-168
• /
• 2012

This paper considers the scenario in which a set of nodes share a common channel. Some nodes have a rechargeable battery and the others are plugged to a reliable power supply and, thus, have no energy limitations. We consider two source-destination pairs and apply the concept of cognitive radio communication in sharing the common channel. Specifically, we give high-priority to the energy-constrained source-destination pair, i.e., primary pair, and low-priority to the pair which is free from such constraint, i.e., secondary pair. In contrast to the traditional notion of cognitive radio, in which the secondary transmitter is required to relinquish the channel as soon as the primary is detected, the secondary transmitter not only utilizes the idle slots of primary pair but also transmits along with the primary transmitter with probability p. This is possible because we consider the general multi-packet reception model. Given the requirement on the primary pair's throughput, the probability p is chosen to maximize the secondary pair's throughput. To this end, we obtain two-dimensional maximum stable throughput region which describes the theoretical limit on rates that we can push into the network while maintaining the queues in the network to be stable. The result is obtained for both cases in which the capacity of the battery at the primary node is infinite and also finite.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.7
• /
• pp.181-188
• /
• 2008

Nowadays, WiMAX which provides internet service with a middle and low speed serves more function and is wider than Wi-Fi. While they solve the security risks as subscribers do handover by subscriber's re-certification procedure as the Network range is getting wider, there are more security problems making the problems of electric-power consumption and delay. This paper suggests a handover mechanism which simplify the subscriber's re-certification procedure and prevents a security problem as doing handover for solving the problem of delay and the rate of processing. The mechanism can cooperate with PKI structure to increase flexibility and security and minimize network re-entry procedure or re-certification procedure by providing continual service. As a result. the mechanism's throughput as the number of subscribers is lower than IEEE 802.16e and the mechanism proves that it is secure from the attack of man-in-the-middle and reply as doing handover.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.2
• /
• pp.113-119
• /
• 2017

In this paper, we have shown the performance analysis results of the LoRa low power wide area network under duty cycle local regulation in Korean RFID/USN frequency band. Especially, we analyzed uplink throughput and data transmission time of a single LoRa end device. From the analysis results, duty cycle regulation, in which a data transmission should be ended within 0.4 second, limits the performance of LoRa network. Therefore, it is necessary to revise Korea's duty cycle regulation referencing EU regulation in order to assess LoRa network in Korea.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.2
• /
• pp.113-118
• /
• 2011

In this paper, we develop a speaker gender classification technique using collaborative sensor fusion for use in a wireless sensor network. The distributed sensor nodes remove the unwanted input data using the BER(Band Energy Ration) based voice activity detection, process only the relevant data, and transmit the hard labeled decisions to the fusion center where a global decision fusion is carried out. This takes advantages of power consumption and network resource management. The Bayesian sensor fusion and the global weighting decision fusion methods are proposed to achieve the gender classification. As the number of the sensor nodes varies, the Bayesian sensor fusion yields the best classification accuracy using the optimal operating points of the ROC(Receiver Operating Characteristic) curves_ For the weights used in the global decision fusion, the BER and MCL(Mutual Confidence Level) are employed to effectively combined at the fusion center. The simulation results show that as the number of the sensor nodes increases, the classification accuracy was even more improved in the low SNR(Signal to Noise Ration) condition.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1749-1754
• /
• 2007

In this paper, we propose a new Intra-body communication system for bio-sensor which is one of applications in PAN(Personal Area Network) using body channel. The communication systems for bio-sensor network usually transmits a lot of data acquired in sensor to the receiver in wrist or waist. So we deign the intra-body modem with high data rate, low power, and small size which are achieved by baseband communication techniques. It is noted that the baseband transmission does not requires any analog IF and RF frontends, and can be operated in lower frequency than bandpass transmission. The proposed modem operates at 10MHz band according to the characteristics of intra-body channel, and shows the capability of 5Mbps data rate at distance of 20cm, with $BER=10^{-5}$. In addition, we implement the modem within $2{\times}2cm$ area.

• Journal of Convergence for Information Technology
• /
• v.12 no.4
• /
• pp.1-8
• /
• 2022

With the development of communication infrastructure, the number of network equipment owned by one person is gradually increasing. General-purpose devices such as smartphones can implement theft/loss prevention function by implementing S/W. However, other small devices lack practicality such as long-distance communication problems due to standard communication technology specifications or H/W limitations, and lack of functions(authentication and security). This study combines the Lora communication protocol in the LPWA standard environment and the blockchain technology. Anti-theft and security functions were added to the protocol, and the PBFT consensus algorithm was applied to build a blockchain network. As a result of the test, the effectiveness of safety(authentication and trust network) and performance(blockchain processing performance) were confirmed. This study aims to contribute to the future development of portable or small device anti-theft products as a 4th industrial convergence research.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.324-327
• /
• 2015

Scaffold is the most commonly used equipment in various types of construction works. Since various types of construction works use the same scaffold equipment, it becomes more difficult to be controlled and managed, thus resulting hazard frequently. According to the information announced in July 2012 by Council of Labor Affairs Executive Yan, the site collapse or incomplete anti-falling protection has led the site to accident frequently, and this is the main reason that causes construction industry occupational disasters. The labor death occupational hazard ratio rises up to 13% in scaffold activity, and the Council of Labor Affairs Executive Yan has showed that the death ratio is higher when using the scaffold in construction site, the total number of death has reached to 139 from 2005 to 2010. In order to ensure the safety of scaffold user, this study tends to build a wireless sensor monitoring system to detect the reliability and safety of the scaffold. The wireless sensor technique applies in this study is different with the traditional monitoring technique which is limited with wired monitoring. Wireless sensor technique does not need wire, it just needs to consider the power supply for establishing the network and receiving stable information, and it can become a monitoring system. In addition, this study also integrates strain gauge technique in this scaffold monitoring system, to develop a real-time monitoring data transfer mechanism and replace the traditional wired single project monitoring equipment. This study hopes to build a scaffold collapse monitoring system to effectively monitor the safety of the scaffold as well as provide the timesaving installation, low-cost and portable features.