• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2020년도 춘계학술대회
• /
• pp.55-55
• /
• 2020

This study investigated the growth and chlorophyll fluorescence reactions of three Ardisia genus grown under various indoor light intensity conditions with the aim of evaluating their suitability as indoor plants. Young seedlings of A. crispa (Thunb.) A.DC., A. pusilla DC., and A. japonica (Thunb.) Blume were used in the experiment. The plants were cultivated indoors for 10 weeks under different light intensities: 10, 50, 100, and 200 PPFD (μmol·m^-2·s^-1), and their growth was compared with that of plants cultivated in a greenhouse during the same period (mean value 236.8±20.4 PPFD at noon). Also, chlorophyll fluorescence analysis was investigated with a portable PAM fluorometer. The indoor plants were maintained at 12/12 h photoperiod, temperature at 25±1℃, and humidity at 55±3%. Irrigation frequency (once every three days) was the same for the indoors and the greenhouse. The results of growth in three Ardisia plants showed that almost all parameters except leaf number and chlorophyll content had similar levels regardless of light intensity. A. crispa and A. pusilla plants grown in 200 PPFD were investigated to have low chlorophyll contents. Meanwhile, chlorophyll fluorescence parameters differed based on light levels. In A. crispa, the Fv/Fm (0.77), DIo/RC (0.47) and Fm/Fo (4.77) parameters tended to be poor at 200 PPFD compared to those at other light intensities. Similarly, the DIo/RC, Fm/Fo, and Pi_Abs parameters of A. pusilla plant (200 PPFD) are 0.45, 4.48 and 2.42, respectively, which can be considered stress. The analysis of fluorescence in A. japonica showed that all parameters except ETo/RC had similar levels regardless of light intensity. The ETo/RC parameter was 0.49 and 0.72 in the control plants and plants 200 PPFD, respectively, which was lower than those in plants at other light intensities. Therefore, it seems that the relatively high light intensity acted as a stressor for Ardisia plants.

• KIEAE Journal
• /
• 제2권2호
• /
• pp.33-38
• /
• 2002

There are a number of practical uses for devices which are capable of piping large amounts of light: illumination of areas where there would be maintenance, safety, or security problems with electronic light sources; piping sunlight into indoor areas for illumination; and the conversion of high luminous efficacy, good color quality, high intensity discharge lamps into more acceptable linear of area sources of light. Prism light guides are hollow structures which pipe light by means of total internal reflectin(TIR). These devices are unique in their ability to combine the efficiency of TIR with the relatively low cost of hollow structure. An important application stems from their ability to transform a point source of light such as an incandescent or discharge lamp into a linear or area source of light or illumination. We report the development of an economical, flexible prismatic film for fabricating the light guide wall. This guide geometries and films are currently under development.

• 센서학회지
• /
• 제26권2호
• /
• pp.85-90
• /
• 2017

A wide dynamic range (WDR) CMOS image sensor (CIS) was developed with a specialized readout architecture for realizing high-sensitivity (HS) and low-sensitivity (LS) reading modes. The proposed pixel is basically a three-transistor (3T) active pixel sensor (APS) structure with an additional transistor. In the developed WDR CIS, only one mode between the HS mode for relatively weak light intensity and the LS mode for the strong light intensity is activated by an external controlling signal, and then the selected signal is read through each column-parallel readout circuit. The LS mode is implemented with the column capacitors and a feedback structure for adjusting column capacitor size. In particular, the feedback circuit makes it possible to change the column node capacitance automatically by using the incident light intensity. As a result, the proposed CIS achieved a wide dynamic range of 94 dB by synthesizing output signals from both modes. The prototype CIS is implemented with $0.18-{\mu}m$ 1-poly 6-metal (1P6M) standard CMOS technology, and the number of effective pixels is 176 (H) ${\times}$ 144 (V).

• 기술사
• /
• 제42권5호
• /
• pp.41-45
• /
• 2009

The last century of lighting has been dominated by incandescent, fluorescent and high-intensity discharge(HID)light sources. In the late 1970's, after green LEDs were invented, Dr. Ching Tang at Eastman Kodak discovered that sending an electrical impulse through carbon compound caused such material glow. Present day LED commercial packages have reached 100 lm/W, comparable to the efficacies of fluorescent and certain HID lamps. LED products available today are market as "Green-Industry" but actually low light output compared to typical light sources. The combination of high price and low light output make them a poor replacement for current technology. It is very important to compare new LED products to the most efficient conventional technology that could be used for any specific application. As LED technology advances, costs decrease, and efficiency improves, LEDs will build market share in the general illumination market.

• 한국수산과학회지
• /
• 제51권1호
• /
• pp.64-71
• /
• 2018

This study was conducted to investigate the effects of light intensity and wavelength on the growth of Tetraselmis suecica and Tetraselmis tetrathele. These species were exposed to a blue light-emitting diode (LED; max=450 nm), a yellow LED (max=590 nm), a red LED (max=630 nm) and a fluorescent lamp (three wavelengths). The maximum growth rates (${\mu}_{max}$) of T. suecica and T. tetrathele under a red LED were 1.12/day and 0.95/day, respectively. Under a yellow LED, growth rates were 70% of the values for red wavelength, with low half-saturation constants (Ks). The optimum light source to ensure economically effective and productive growth in a Tetraselmis culture system (Photo-Bioreactor) would thus appear to be a three-phase culture, wherein a yellow LED is used during the lag phase and initial exponential phase to increase growth rate, followed by a red LED during the middle exponential phase to maximize growth rate, and finally a yellow LED again during the late exponential phase and stationary phase to achieve increased yield of useful bioactive substances.

• Current Optics and Photonics
• /
• 제1권3호
• /
• pp.207-213
• /
• 2017

The Adaptive Front-lighting System (AFS) is a part of the active safety system, providing optimized vision to the driver during night time and other poor-sight conditions of the road by automatic adaptation of lighting to environmental and traffic conditions. Basically, an AFS provides four different modes of the passing beam as designated in an United Nations Economic Commission for Europe regulation (ECE324-R123): neutral state or country light (Class C), urban light (Class V), highway light (Class E), and adverse weather light (Class W). In this paper, we first present an optics design for an AFS system capable of producing the Class C/V/E/W patterns requiring only on/off modulation of multi-array LEDs with no need for any additional mechanical components. The AFS optics consists of two separated modules, cutoff and spread; the cutoff module lights a narrow central area with high luminous intensity, satisfying the cutoff regulation, and the spread module forms a wide spread beam of low luminous intensity. Each module consists of two major parts; the first converts a discretely positioned LED array into a full-filled area emitting light source plane, and the second projects the light source plane to a 25 m away target plane. With the combination of these two optics modules, the four beam patterns are formed by simple on/off modulation of multi-array LEDs. Then we report the development of a prototype that was demonstrated to provide the four beam patterns.

• 한국농림기상학회지
• /
• 제10권4호
• /
• pp.141-148
• /
• 2008

피음처리에 의한 네 참나무 수종(신갈나무, 졸참나무, 상수리나무, 굴참나무)의 광합성 반응 특성을 조사하기 위하여, 차광막으로 전천광을 35%, 55%. 75% 차광 처리한 조건과 전광조건에서 엽생장과 엽록소함량을 측정하고 광-반응 곡선과 A-Ci 곡선을 통하여 광합성계의 특성을 조사하였다. 그 결과, 굴참나무와 상수리나무는 엽생장, 엽록소함량, 순양자수율을 증가시키고 엽록소 a/b와 탄소고정효율을 감소시켜 빛의 흡수량과 광합성에 대한 이용효율을 높이는 적응 반응을 나타냈다. 신갈나무는 굴참나무와 상수리나무와 같은 경향의 적응반응을 보였지만 광합성 광화학계 활성의 저하로 낮은 광합성 능력을 나타냈다. 졸참나무는 가장 낮은 내음성 적응반응을 나타냈다.

• 한국작물학회지
• /
• 제45권2호
• /
• pp.118-122
• /
• 2000

An extensive investigation has been made for the possible utilization of polypropylene spunbonded fabrics in rice seedling nursery. Considering the cropping systems available in southern part of Korea, sowing dates were fixed at April 5 and April 20 for single cropping and May 6 and May 26 for double cropping. Nursery period was fixed to 35 days for each sowing date. Four different thickness of polypropylene spunbonded fabrics, 40, 60, 80, 100 g/$m^2$, were tested in rice seedling nursery. The temperature and light intensity were not significantly different among the thickness of polypropylene spunbonded fabrics. Light intensity was significantly reduced in polypropylene spunbonded fabric (72.2 Klux) compared with polyethylene mm (85.5 Klux), however, the reduced light intensity was enough for seedling growth. The temperature in the polypropylene spunbonded fabric covering during low air temperature was higher than that in polyethylene mm tunnel. At transplanting, the rice seedlings grown in polypropylene spunbonded fabric condition was shorter (17cm) but healthier than those in polyethylene mm (23cm). The estimated possible nursery periods using the polypropylene spunbonded fabric covering may start from April 1 at Chinju (plain area in Southern Korea, 20m altitude) and April 15 at Susang (mountainous area, 430m altitude). Labour hours and cost were reduced by about 28% and 48%, respectively.

• 한국산림과학회지
• /
• 제76권3호
• /
• pp.218-229
• /
• 1987

본(本) 연구(硏究)는 광환경(光環境) 및 근장(根長)의 정도(程度)를 각기 달리한 잣나무 유묘(幼苗)의 중량(重量) 생장(生長)을 측정(測定) 고찰(考察)한 것으로 그 결과(結果)는 다음과 같았다. 1) 묘목(苗木)의 중량(重量) 생장(生長)은 상대광도(相對光度) 63%구(區)가 가장 높게 나타났으나 전체적(全體的)으로는 피음(被陰)의 정도(程度)가 강(強)할 수록 점차(漸次)로 감소(減少)하는 경향(傾向)을 보였으며, 단근(斷根) 처리(處理)의 경우는 1/4 단근구(斷根區)가 타(他) 처리구(處理區)에 비(比)해 제일 높았다. 2) 묘목(苗木)의 T/R율(率)값은 광도(光度)가 낮았을 때와 단근(斷根) 정도(程度)가 강(強)할 수록 각각(各各) 그 값이 점차(漸次)로 높게 나타나서 결국(結局) 피음(被陰) 및 단근(斷根)의 정도(程度)가 강(強)할 수록 묘목(苗木)의 생장(生長)은 약세(弱勢)를 나타냈다. 3) 그리고 광도(光度) 및 단근량(斷根量)과 T/R율(率) 간(間)에는 2차(次) 회귀관계(回歸關係)에 있음을 알 수 있었다.

• Archives of Reconstructive Microsurgery
• /
• 제17권2호
• /
• pp.120-125
• /
• 2008

Purpose: Heat therapy by heat lamp after microvascular surgery is being used for preventing blood vessels's contraction and blood-flow's disturbance. As usually, incandescent lamp has been used. But there have been several problems and need for improvement in the existing heat lamp treatment. So we would like to introduce improved heat lamp to keep an appropriate temperature and intensity of illumination. Methods: The existing heat lamps are the ones of general light stands covered with newspaper, having 60 watt light bulb of incandescence and lampshade made of aluminum. We have tried to improve shortcomings of the existing heat lamps by enlarging the size of aluminum lampshade and attaching a curtain that can block heat and light. We conducted a comparative study between the existing and improved heat lamps. Under the assumption that there are several affected parts, we have also measured the distance from heat lamp to patients' eye region and then intensity of illumination. Result: The target temperature of surface was realized in 11 minutes with the maximum temperature reaching at 36.6 degrees C in 28 minutes at the existing heat lamp while the target temperature reached in 7 minutes with the maximum temperature reaching at 39.0 degrees C in 17 minutes at the improved heat lamp. The existing and improved heat lamp showed 38 lx and 0.1 lx of intensity of lumination, respectively. Conclusion: Using improved heat lamps, we can keep an appropriate temperature and we think we can make contribution to patients' treatment by making them and their neighbors able to sleep with minimized disturbance thanks to low intensity of illumination secured by blocking light.