• 제목/요약/키워드: low light intensity

검색결과 407건 처리시간 0.033초

초음파가 잉어 Cyprinus carpio의 성장 및 단기적 행동에 미치는 영향 (Effect of Ultrasound on the Growth and Short-term Behaviour of the Carp, Cyprinus carpio)

  • 윤성진;염동혁;김우근;윤홍길;이성규
    • 생태와환경
    • /
    • 제40권2호
    • /
    • pp.244-253
    • /
    • 2007
  • 본 연구에서는 잉어의 생태 반응에 미치는 초음파(강도 31 dB re 1 ${\mu}Pa$, 주파수 $14{\sim}15$ kHz)의 영향을 구명하기 위하여 치사율, 체중변화, 건강성 평가 및 행동패턴을 관찰하였다. 실험기간 동안 초음파에 노출된 잉어 Cyprinus carpio의 치사율은 대조군을 포함하여 처리군 모두 5% 이하로 실험구 사이의 치사율은 뚜렷하게 구별되지 않았다(P>0.05). 각각의 실험구에서 측정한 실험어류의 평균 체중은 실험종료 시 대조군에 비해 처리군에서 약간 증가하는 경향을 보였으나 실험구간의 뚜렷한 차이는 보이지 않았다. 대조군과 고처리군의 일부 개체들은 가벼운 표피손상과 꼬리지느러미의 출혈 흔적이 관찰되었으나 눈, 지느러미, 기생충 감염, 흉선의 출혈 및 아가미에서는 이상증상이 전혀 관찰되지 않았다(P>0.05). 근거리에서 일시적으로 초음파를 발생시켰을 때 어류는 음원으로부터 회피하는 방향성 움직임을 보였으나 원거리에서 초음파에 노출된 잉어는 뚜렷한 행동변화를 보이지 않았다. 결론적으로 낮은 강도의 초음파에 노출된 어류는 초음파 발생에 따른 심각한 스트레스는 받지 않을 것으로 판단된다.

Site-selective Photoluminescence Spectroscopy of Er-implanted Wurtzite GaN under Various Annealing Condition

  • Kim, Sangsig;Sung, Man Young;Hong, Jinki;Lee, Moon-Sook
    • Transactions on Electrical and Electronic Materials
    • /
    • 제1권1호
    • /
    • pp.26-31
    • /
    • 2000
  • The ~1540 nm $^4$ $I_{13}$ 2/ longrightarro $w^4$ $I_{15}$ 2/ emissions of E $r^{3+}$ in Er-implanted GaN annealed at temperatures in the 400 to 100$0^{\circ}C$ range were investigated to gain a better understanding of the formation and dissociation processes of the various E $r^{3+}$ sites and the recovery of damage caused by the implantation with increasing annealing temperature ( $T_{A}$).The monotonic increase in the intensity of the broad defect photoluminescence(PL) bands with incresing $T_{A}$ proves that these are stable radiative recombination centers introduced by the implantation and annealing process. Theser centers cannot be attributed to implantation-induced damage that is removed by post-implantation annealing. Selective wavelength pumpling of PL spectra at 6K reveals the existence of at least nine different E $r^{3+}$ sites in this Er-implanted semiconductor. Most pf these E $r^{3+}$ PL centers are attributed to complexed of Er atoms with defects and impurities which are thermally activated at different $T_{A}$. Only one of the nine observed E $r^{3+}$ PL centers can be pumped by direct 4f absorption and this indicates that it is highest concentration E $r^{3+}$ center and it represents most of the optically active E $r^{3+}$ in the implanted sample. The fact that this E $r^{3+}$ center cannot be strongly pumped by above-gap light or broad band below-gap absorption indicates that it is an isolated center, i.e not complexed with defects or impurities, The 4f-pumped P: spectrum appears at annealing temperatures as low as 40$0^{\circ}C$, and although its intensity increase monotonically with increasing $T_{A}$ the wavelengths and linewidths of its characteristic peaks asre unaltered. The observation of this high quality E $r_{3+}$PL spectrum at low annealing temperatures illustrates that the crystalline structure of GaN is not rendered amorphous by the ion implantation. The increase of the PL intensities of the various E $R_{3+}$sites with increasing $T_{A}$is due to the removal of competing nonradiative channels with annealing. with annealing.annealing.

  • PDF

저출력 레이저 자극에 의한 척수내 신경세포의 활성변화 (The spinal neuronal activity induced by low power laser stimulation)

  • 오경환;최영덕;임종수
    • 대한물리치료과학회지
    • /
    • 제8권2호
    • /
    • pp.1005-1013
    • /
    • 2001
  • The present study was designed to investigate the effect of low power GaAlAs laser on spinal Fos expression related to the anti-nociceptive effect of laser stimulation. Low power GaAlAs laser was applied to either acupoint or non-acupoint for 2 hour under light inhalation anesthesia. Spinal Fos expression in the dorsal horn was compared to that obtained in inhalation anesthesia control group. Furthermore, we analyzed the effect of the local treatment of lidocaine on the spinal Fos expression evoked by low power GaAlAs laser stimulation. The results were summarized as follows: 1. In the normal animals, only a few Fos like immunoreactive(Fos-IR) neurons were evident in the lumbar spinal cord dorsal horn. Similarly, following prolonged inhalation anesthesia, Fos-IR neurons were absent in the dorsal horn of the lumbar spinal cord. In animals treated with laser stimulation, Fos immunoreactive neurons were increased mainly in the medial half of ipsilateral laminae I-III at lumbar segments L3-5. These findings directly indicated that prolonged anesthesia used in this study did not affect the Fos expression in the spinal cord dorsal horn of intact animals and low power laser stimulation dramatically produced Fos expression in the spinal cord laminae that are related to the anti-nociceptive effect of laser stimulation. 2. In acupoint stimulated animals, 10mW of laser stimulation, not 3mW and 6mW intensity, significantly increased the number of Fos immunoreactive neurons in the spinal dorsal horn(p<0.05). However, laser stimulation on acupoint more dramatically increased the number of Fos immunoreactive neurons in the spinal cord rather than laser stimulatin on non acupoint. These result suggested that laser stimulatin on acupoint was more effective treatment to activate the spinal neuron than non acupoint stimulation. 3. The local treatment of lidocaine totally suppressed the activity of spinal neurons that were induced by lower power 1aser stimulation. These data indicated that the anti-nociceptive effect of laser stimulation was absolutely dependent upon the peripheral nerve activity in the stimulated location. In conclusion, these data indicate that 10mW of low power laser stimulation into acupoint is capable of inducing the spinal Fos expression in the dorsal horn related to the anti-nociceptive effect of laser stimulation, Furthermore, the induction of spinal Fos expression was totally related to the peripheral nerve activity in the laser stimulated area.

  • PDF

광도에 따른 담배와 인삼엽의 광합성 능력의 차이 (Differences of Photosynthetic Ability of Tobacco and Ginseng Leaves in Accordance with Light Intensity)

  • 황종규;현동윤
    • 한국작물학회지
    • /
    • 제34권2호
    • /
    • pp.211-219
    • /
    • 1989
  • 담배와 인삼은 광강도에 따라 반응이 다르게 나타났다. $CO_2$ 흡수량과 RuBPCase 활성은 담배의 경우 1900 $\mu$ E m$^{-2}$ sec$^{-1}$에서 높았고 인삼은 500 $\mu$ E m$^{-2}$ sec$^{-1}$에서 높았다. 담배와 인삼의 $CO_2$ 흡수량과 RuBPCase 활성의 차이는 담배가 3.7배, 2.7배 각각 높았다. $CO_2$ 흡수량과 RuBPCase 활성과의 상관은 담배에서 고도의 정의 상관이 인정되었으나 인삼은 부의 상관이 인정되는 경향이었다. Glycolate oxidase 와 Malate dehydrogenase 활성은 담배의 경우 1,900 $\mu$ E m$^{-2}$ sec$^{-1}$에서 높았고, 인삼은 1000 $\mu$ E m$^{-2}$ sec$^{-1}$에서 높았다. 담배의 Nitrate reductase 활성은 광조건이 1900 $\mu$ E m$^{-2}$ sec$^{-1}$가 500 $\mu$ E m$^{-2}$ sec$^{-1}$보다 2배 높았으나 인삼은 광처리구 모두 Nitrate reductase 활성을 검출할 수 없었다. 단백질함량과 엽록소함량은 담배가 인삼보다 적정 광구에서 2.2배, 1.5배 각각 높았다. 엽록소 a/b의 비율은 담배의 경우 500 $\mu$ E m$^{-2}$ sec$^{-1}$에서 낮았고 인삼은 1000 $\mu$ E m$^{-2}$ sec$^{-1}$에서 낮았다. 단백질함량과 엽록소함량과의 관계는 담배에서 고도의 정상관이었고 인삼은 500 $\mu$ E m$^{-2}$ sec$^{-1}$에서 처리 후 5일에 부상관이 인정되었다. 단백질조성은 담배와 인삼이 상이하였지만 주 band의 분자량은 담배와 인삼 모두 50KD과 15KD으로 비슷하였다. 이들은 처리 후 시기가 지나면 희미해졌으며 담배는 500 $\mu$ E m$^{-2}$ sec$^{-1}$에서 인삼은 1000 $\mu$ E m$^{-2}$ sec$^{-1}$에서 47KD이었다.

  • PDF

저광도에 대한 시클라멘 엽병의 발육 단계 및 온도 조건별 신장 반응 (Developmental Stage and Temperature Influence Elongation Response of Petiole to Low Irradiance in Cyclamen persicum)

  • 오욱;김기선
    • 원예과학기술지
    • /
    • 제28권5호
    • /
    • pp.719-727
    • /
    • 2010
  • 낮은 광도는 시클라멘($Cyclamen$ $persicum$ Mill.)의 지상부 신장을 촉진하여 분화의 품질을 떨어뜨리는데, 그 정도는 발육단계와 환경요인에 따라 달라지는 것으로 보인다. 저광도에 대한 엽병의 신장 반응 양상을 알아보기 위해, 유년상(전개엽 5-6매), 전이상(화아 1-3개) 및 성년상(화경 신장 중인 화아 1-3개)의 'Metis Scarlet Red' 시클라멘을 선별하여 명기/암기의 온도가 16/12(저온, LT), 22/18(중온, MT), 28/$24^{\circ}C$ (고온, HT)로 유지되는 대형 생장상의 생장 모듈 내에서 생장시켰다. 생장 모듈은 명기 동안 두 가지 광도조건[60(저광, LL), 240(고광, HL) ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD]으로 유지되었다. 실험 I에서는 MT 생장상에서 유년상의 식물체를 LL 또는 HL 모듈에 4주 동안 계속 두거나 처리 1, 2, 3주후 다른 광도의 모듈로 상호 이동시킨 후 신장 반응을 조사하였다. 실험II에서는 MT 생장상에서, 유년상, 전이상, 그리고 성년상의 식물체를 LL 모듈에 넣은 지 0, 3, 6, 9, 12일째에 HL 모듈로 옮기고 21일째에 신장 반응을 조사하였다. 실험 III에서는 LT, MT, HT 생장상에서 전이상의 식물체를 LL 모듈에 넣은 지 0, 3, 6, 9, 12일째에 HL 모듈로 옮기고 21일째에 신장 반응을 조사하였다. LL 노출시간이 0-4주까지 또는 0-12일까지 증가할수록 엽병장과 초장은 모든 온도 조건과 발육단계에서 증가하였다. 4주간 처리된 실험 I에서 후기의 LL 노출이 전기의 노출보다 엽병의 신장속도를 증가시켰다. 실험 II에서, 처리기간 12일 중 초기의 엽병 신장 양상을 보면 전이상 식물체가 유년상이나 성년상보다 LL에 더 민감하게 반응하였다. 실험 III에서, 온도가 증가할수록, 그리고 LL노출시간이 길어질수록 시클라멘의 엽병장은 증가하였다. HT에서의 엽병 신장 속도는 LT와 비교하여 LL처리 초기부터 빠르게 증가하였다. 엽병 신장에 있어서 온도 $6^{\circ}C$ 증가는 3일간 LL 노출과 유사한 효과를 보였다. 결론적으로, 시클라멘은 전이상일 때 고온 하에서 더 즉각적으로 저광도에 반응하여 엽병을 신장시킨다는 것을 알 수 있었다.

수도품종의 위고현상과 생리 및 형태해부학적 구조와의 관련성에 관한 연구 (Relationships of Physiologieal Activity and Anatomical Structure to the Wilting Phenomena in Rice Plant 1. Reappearance of the Wilting Phenomena concerning to Physiological Aspects and Environment)

  • 이종훈;윤종혁
    • 한국작물학회지
    • /
    • 제25권1호
    • /
    • pp.1-7
    • /
    • 1980
  • 본 시험은 신품종인 유신을 공시하여 실소와 가리의 시비수준을 달리하고 출수후 차광처리를 하여 급성위고현상의 발생을 재현시고, 위고현상의 발생과 식물체내 무기성분의 함양 및 근의 생리적 활역과의 관련성을 명백히 함과 동시에 1976년에 전국적으로 .유신품종에 대발생한 위고현상과 1977년에 전혀 발생이 없었던 기상적인 요인을 비교 검토하여 위고현상의 발생요인을 구명코자 실시하였다. 그 결과를 요약하면 다음과 같다. 1. 유신품종은 실소증비에 의해 엽신중당 영화수 (Sink/source)가 현저히 증가하고, 상위절간에 비해 하위절간의 신장률이 뚜렷한 품종적인 특징이 있다. 2. 유신품종은 실업증비에 따라 엽신의 호흡양이 타품종에 비해 현저히 증대하는 특성이 있음을 인정 할 수 있었다. 3. 위고극다비( $N_{30}$, $K_{10)}$ 하에서 근발육과 근의 생리적 활력이 저하했으며, 실소극다비+차광처리에서 더욱 현저한 저하를 보였다. 4. 또한 실고극다비+차광처리는 도체내 엽초와 간내의 K_2 O함량을 저하시키고, 특히 간내 K_2O/N 비 및 탄수화물의 함량을 명백히 저하시켰다. 5. 유신의 위고현상은 실소극다비구에서 경미하게 발생하였고, 실고극다비+차광에서 50 % 처리구에서 격심한 발생을 유발 재현시킬 수 있었다. 6. 본 시험결과로 미루어 1976년에 대발생한 유신의 급성위고현상은 도작기간 일사양이 현저히 부족했던 기상적인 요인이 주요인이며, 농민의 실소과잉시용이 위고현상을 조장하는 부요인으로 해석되었다.

  • PDF

다양한 파장폭의 가시광선에 의해 중합된 복합레진의 미세경도와 변연누출도 (MICROHARDNESS AND MICROLEAKAGE OF COMPOSITE RESIN CURED BY VISIBLE LIGHT WITH VARIOUS BAND OF WAVELENGTH)

  • 박수만;이재용;한승렬;하상윤;신동훈
    • Restorative Dentistry and Endodontics
    • /
    • 제27권4호
    • /
    • pp.403-410
    • /
    • 2002
  • Several ways of curing are being tried to improve material's properties and reduce marginal gap. However, all are considering about the pattern of light intensity. It was noted from the preliminary study the change of light wavelength from filter changing may give an impact on material's property and microleakage. The object of this study was to verify the effect of filters with various wavelength width on the microhardness and microleakage of composite resin ; hybrid type of DenFil and submicron hybrid type of Esthet X. Composite resins were cured using 3 kinds of filter; narrow-banded(465-475 nm), mid-banded(430-470 nm), wide-banded(400-500 nm). After the estimation of microhardness. degree of dye penetration and the maximum gap from SEM evaluation were done between 4 groups that showed no difference in microhardness value of the lower surface . The results were as follows : 1 Adequate microhardness could not be gained with a narrow-banded filter irrespective of curing time. At the upper surface, DenFil should be polymerized with middle or wide-banded filter for 20 seconds at least, while Esthet X be col$.$ed with middle or wide-banded filter for 30 seconds at least to get simitar hardness value to control group. 2. There was little dye penetration in enamel margin, but all dentin margins skewed much more dye penetration irrespective of curing conditions. Although there was no statistical difference, groups cured with mid-banded filter for 40 seconds and with wide-width filter for 20 seconds showed relatively less dye penetration. 3. It was revealed from the SEM examination that group cured with wide-banded filter had the smallest gap without statistical significance. Spearman's rho test showed that the correlation between the results of dye penetration and SEM examination was very low. From these results, it could be concluded that curing with wide-width filter would be better than the other techniques, even though the curing technique using mid-width filter seems to have its own unique advantage.

차광제와 이류체 포그시스템을 이용한 고온기 시설내 환경관리 (Optimum Management of Greenhouse Environment by the Shading Coat and Two-fluid Fogging System in Summer Season)

  • 김성은;이재은;이상돈;김학선;전희;정우리;이문행;김영식
    • 생물환경조절학회지
    • /
    • 제24권1호
    • /
    • pp.34-38
    • /
    • 2015
  • 본 실험은 광파장 선택형 차광제와 이류체 포그시스템을 이용하여 고온기 시설내 고온과 건조문제를 해소할 수 있는 적정 냉각법을 구명하기 위하여 수행되었다. 실험처리는 차광제와 이류체 포그시스템을 설치하지 않은 대조구(Non), 이류체 포그시스템만 설치하여 작동한 처리(Fog), 차광제만 도포한 처리(Coat), 외부에 차광제를 도포하고 내부에 이류체 포그시스템을 작동한 처리(F&C) 등이었다. 유입 일사량(열량)은 Non, Fog, Coat, F&C 순으로 많았다. 시설내 기온을 낮추는 방법으로는 이류체 포그시스템이 더 효과적이었다. 또한 이류체 포그시스템을 처리하면 상대습도도 적절히 조절할 수 있었다. 작물의 품온은 다른 처리구에 비해 대조구에서 약 $6^{\circ}C$ 이상 높았다. 연구결과, 고온기 시설내 광, 온도, 상대습도 환경조절에 가장 효과적인 방법은 이류체 포그시스템과 차광제 도포를 함께 하는 것이나, 효과 및 경제성을 함께 고려한다면 이류체 포그시스템을 활용하는 것이 가장 좋은 것으로 판단된다. 그러나 단동하우스의 경우에는 구조적 제약으로 이류체 포그시스템의 설치보다 광선 선택형 차광제를 도포하는 것이 더 좋은 방법으로 사료된다.

자색고구마 색소의 안정성에 관한 연구 (Study on the Stability of Anthocyanin Pigment Extracted from Purple Sweet Potato)

  • 이란숙;임종환;김선재;정병춘
    • 한국식품과학회지
    • /
    • 제28권2호
    • /
    • pp.352-359
    • /
    • 1996
  • 새로운 천연식용색소원으로 기대되는 자색고구마 anthocyanin 색소의 안정성에 관한 기초연구로서 자색고구마 색소에 대한 pH, 당, 유기산, 금속이온, ascorbic acid및 광 등의 영향을 조사하였다 자색고구마 색소는 pH가 낮을수록 색깔의 강도가 높고 안정한 경향을 나타냈으며 , pH가 증가함에 따라 최대흡수파장이 장파장쪽으로 이동하는 bathochromic shift 현상을 나타냈다. 첨가한 당류 중 glucose는 색소의 안정성에 기여하였으며, sucrose와 fructose는 역효과를 나타냈다. 유기산의 첨가는 색소의 안정화에 크게 기여하였으며, ctric acid가 가장 효과적이었으며, 다음으로 malic acid, tartaric acid, succinic acid 순으로 나타났다. 금속이온은 색소의 안정성을 떨어뜨렸으나, $Al^{3+}$$Cd^{2+}은 자색고구마 anthocyanin색소의 안정성에 기여하는 것으로 나타났다. Ascorbic acid는 색소의 안정성을 저해하였으며 산소 존재하에서는 그 정도가 컸다. 자색고구마 색소의 안정성은 광에 의해 크게 저하되었는데, 형광보다 일광에 대한 영향이 더 켰으며, 저장시 광을 차단함으로써 안정성을 증진시킬 수 있었다.

  • PDF

3D 프린터를 활용한 맞춤형 휴대용 형광측정 장치 개발 (Development of Customizable Fluorescence Detection System using 3D Printer)

  • 조경래;서정혁;최세운
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2019년도 춘계학술대회
    • /
    • pp.278-280
    • /
    • 2019
  • 유세포 분석법은 단일 세포나 미세 입자에 대한 다양한 광학적 특성을 측정하여 이를 매개 변수로 나타내는 측정법이다. 이러한 매개 변수에는 세포의 크기, 입상도, 형광 강도 등이 있으며 이는 세포와 광원에서 조사한 빛의 물리적이며 광학적인 상호 작용에 의해 방사되는 빛에 따라 결정된다. 하지만 유세포 분석법은 고가이며 크기가 크고 다양한 형광염료의 사용이 제한적이라는 단점이 있다. 또한, 측정할 수 있는 다양한 데이터에 비해 사용자가 원하고자 하는 데이터는 한정적일 수도 있다. 이러한 특징은 비용/공간적으로 제한적인 연구 환경을 가진 연구자에게 있어서 어려운 점으로 다가오고 있다. 이에 본 연구는 소형의 발광다이오드와 포토다이오드를 이용하여 저가의 휴대용 형광측정 장치를 개발하고자 한다. 이는 누구나 제작하기 쉽도록 3D 프린터로 설계되었으며 광원과 필터 그리고 광센서의 교체가 가능하도록 설계하여 표적 세포 및 형광염료의 다양한 선택이 가능하다. 제안된 형광측정 장치를 통하여 형광처리가 된 세포를 다양한 세포 수로 분류하여 측정하였으며 그 결과, 측정된 형광의 세기가 세포의 농도에 따라 비례한 것을 보였으며 또한 높은 선형성을 보여주었다.

  • PDF