• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.421-421
• /
• 2006

The light and energy-efficiency of classical liquid crystal displays is notoriously poor due to the use of absorption-based linear polarisers and colour filters. For instance, the light efficiency of PVAL polarisers is typically between 40 and 45 % and the colour filters have a typical efficiency below 35 % which results in a total light and energy-efficiency of the display below 10 %. In the past, a variety of polarizers were developed with an enhanced efficiency in generating linearly polarized light. Typically, these polarizers are based on the polarisationselective reflection, scattering or refraction of light i.e. one polarisation direction of light is directly transmitted to the LCD/viewer and the other polarization direction of light is depolarised and recycled which results in a typical efficiency for generating linearly polarized light of 70-85 %. Also, special colour filters have been proposed based on chiral-nematic reactive mesogens which increase the efficiency of generating colour. Despite the enormous progress in this field, a need persists for improved methods for generating polarized light and colour based on low cost optical components with a high efficiency. Here, the use of holographic phase gratings is reported for the generation of polarized light and colour. The phase grating are recorded in a photopolymer which is coated onto a backor frontlight for LCDs. Typically the recording is performed in the transmisson mode or in the waveguiding mode and slanted phase gratings are generated with their refractive index modulation at an angle between 20o and 45o with the normal of the substrate. It is shown that phase gratings with a high refractive index modulation and a high efficiency can be generated by a proper selection of the photopolymer and illumination conditions. These phase gratings coupleout linearly polarized light with a high contrast (> 100) and the light is directed directly to the LCD/viewer without the need for redirection foils. Dependent on the type of phase grating, the different colours are coupled-out at a slightly different angle which potentially increases the efficiency of classical colour filters. Moreover, the phase gratings are completely transparent in direct view which opens the possibility to use them in frontlights for LCDs. Holographic polarization gratings posses a periodic pattern in the polarization state of light (and not in the intensity of light). A periodic pattern in the polarization direction of linearly polarized light is obtained upon interference of two circularly polarized laser beams. In the second part of the lecture, it is shown that these periodic polarization patterns can be recorded in a linear photo-polymerizable polymer (LPP) and that such an alignment layer induces a period rotation in the director of (reactive and non-reactive) liquid crystals. By a proper design, optical components can be produced with only first order diffraction and with a very high efficiency (>0.98). It is shown that these diffraction gratings are potentially useful in projection displays with a high brightness and energy efficiency

• Korean Journal of Ecology and Environment
• /
• v.50 no.4
• /
• pp.363-373
• /
• 2017

This study was conducted to evaluate the characteristics of geosmin production of Anabaena circinalis under different environmental condition. The test cyanobacterium was isolated from Lake Paldang. The growth rate and geosmin production of A. circinalis were examined with different variables including temperature (10, 15, 20, $25^{\circ}C$), light intensity (60, 120, $240{\mu}mol\;photons\;m^{-2}\;s^{-1}$), and phosphorus concentration (0.01, 0.05, 0.25, 0.50, $1.00mg\;L^{-1}$). The highest growth rate and chlorophyll-a (Chl-a) concentration appeared at $25^{\circ}C$, $60{\mu}mol\;photons\;m^{-2}\;s^{-1}$ and $1.00mgP\;L^{-1}$ for temperature, light intensity, and P concentration, respectively. Total geosmin production was highest at the optimal growth condition of each variable, while chlorophyll-specific geosmin production (the ratio of geosmin to Chl-a) was higher at the less favorable growth condition, indicating high potential of the off-flavor problem during low temperature period, e.g., late fall and early winter. Our results demonstrated that geosmin production of A. circinalis was directly related to chlorophyll synthesis and varied with cellular growth condition.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.1
• /
• pp.183-194
• /
• 2010

A suitability analysis for marine afforestation was carried out on physical items based on slop rate, bottom sediment, light intensity, velocity, and wave at north Geomoon waters in Korea. The data from each physical item were changed to a GSDM (Gridded Spatial Distribution Map) using Kriging interpolation. A GSDM grid includes information, and each grid was given a SI (suitability index) of 3 grades(SI of first suitability was 100, SI of second suitability was 50, and non-suitability had no SI). According to the analysis results of all overlaid GSDM, first suitability had 500 SI, and suitability area was 0.25ha. Second and third suitability had 400~450 SI, and suitability area was 2.36ha, 1.80ha, respectively. Therefore, the results suggest that reefs installed for marine afforestation should be anti-slip types against steep slope, and the target species need to include algae with low compensation light intensity in second and third suitability.

• Microbiology and Biotechnology Letters
• /
• v.19 no.2
• /
• pp.179-185
• /
• 1991

We examined optimum culture conditions of Rhodopseudomonas sphaeroides B5 for effective utilization of substrate and sunlight for hydrogen production. The optimum concentration range of DL-lactate as electron donor for hydrogen production by resting cells was from 5 to 50mM, and optimun CN ratio (lactate/glutamat) for maintenence of hydrogen production activity by growing cultures was from 5 to 6. Hydrogen production by the cultures of low cell density (0.36mg/ml dry cells) was saturated with 10 Klux light intensity. Under constant illumination of 50Klux which was set up as the average medium value of annual variation of sunlight intensity, hydrogen production with various cell densities in the culture resulted in highest production rate (132${\mu}$l/hr/mg dry cells) up to 0.64mg/ml dry cells. However, the amount of total hydrogen production was saturated with cell density of 2.1mg/ml dry cells. In addition to these, the optimum inner thickness pervious to light of the culture vessel for hydrogen production which was measured under sunlight was 5 cm.

• Horticultural Science & Technology
• /
• v.30 no.3
• /
• pp.236-242
• /
• 2012

We investigated the influences of night interruption (NI) and night temperature on flowering and flower coloration in Cymbidium. Cymbidium 'Red Fire' and 'Yokihi' were grown under a 9 hours photoperiod (control), a 9 hours photoperiod with NI at a low light intensity (LNI) of 3-7 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, or a 9 hours photoperiod with NI at a high light intensity (HNI) of 120 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ for four hours (22:00-02:00 HR) for 16 weeks during the reproductive growth stage (Experiment 1). Thirty month-old Cymbidium 'Red Fire' plants with initiated flowering buds were placed in four different growth chamber with night temperature set points of 6, 9, 12, or $15^{\circ}C$ for 16 hours (18:00 to 09:00 HR) and a daytime temperature of $25^{\circ}C$ (Experiment 2). In Experiment 1, the numbers of visible buds and flowers increased, and time to flowering decreased in both the LNI and HNI treatments, as compared to the control in both cultivars. Red color in Cymbidium 'Red Fire' increased by both LNI and HNI, as evidenced by an increased $a^*$ in plants grown under these conditions, relative to those grown under the control condition. Number of days to visible buds at 9-$15^{\circ}C$ ranged from 31-34 days, as compared to 39 days at $6^{\circ}C$ in Experiment 2. Although as the temperature increased days to flowering decreased when the plant was grown at $15^{\circ}C$ as compared to 6, 9, or $12^{\circ}C$, the red color ($a^*$) also decreased. The number of flowers and percent flowering increased when the night temperature was maintained higher than $9^{\circ}C$. Therefore, NI treatment and maintaining the night temperature at approximately 9-$12^{\circ}C$ during the winter season after flower spike initiation in the reproductive developmental growth stage improve flower quality and controls flowering time.

• Journal of Sensor Science and Technology
• /
• v.24 no.2
• /
• pp.131-136
• /
• 2015

This paper presents a wide dynamic range complementary metal oxide semiconductor (CMOS) image sensor with column capacitor and feedback structure. The designed circuit has been fabricated by using $0.18{\mu}m$ 1-poly 6-metal standard CMOS technology. This sensor has dual mode operation using combination of active pixel sensor (APS) and passive pixel sensor (PPS) structure. The proposed pixel operates in the APS mode for high-sensitivity in normal light intensity, while it operates in the PPS mode for low-sensitivity in high light intensity. The proposed PPS structure is consisted of a conventional PPS with column capacitor and feedback structure. The capacitance of column capacitor is changed by controlling the reference voltage using feedback structure. By using the proposed structure, it is possible to store more electric charge, which results in a wider dynamic range. The simulation and measurement results demonstrate wide dynamic range feature of the proposed PPS.

• Journal of Marine Bioscience and Biotechnology
• /
• v.11 no.1
• /
• pp.14-22
• /
• 2019

Omega-3 fatty acids and carotenoids, which are known as representative high-value substances derived from microalgae, are being studied from various diatoms. Most of the diatoms contain fucoxanthin and omega-3 fatty acid. Fucoxanthin produced by diatom has been reported as bioactive compounds exhibiting strong antioxidant, anticancer and anti-inflammatory activities. However, the low growth rate and fucoxanthin content of diatoms are one of the big obstacles to the industrial application. In this study, indigenous marine diatom Achnanthidium sp. BS-001 was isolated for a candidate of fucoxanthin producer. Light intensity and temperature for the culture of Achnanthidium sp. BS-001 were optimized on PhotoBiobox. Optimization of silicate concentration for increasing BS-001 biomass productivity was confirmed in F/2 medium with various concentration of sodium silicate. As a result, condition of light intensity, temperature, and silicate concentration for optimal cultivation were $150{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, $18^{\circ}C$ and 0.106 mM, respectively. Maximum biomass productivity reaches to $154.3mg{\cdot}L^{-1}{\cdot}day^{-1}$, and then the content of omega-3 fatty acids and fucoxanthin were $19.4mg{\cdot}g^{-1}$, $9.05mg{\cdot}g^{-1}$, respectively. These results indicate that Achnanthidium sp. BS-001 has the potential to be used as a source of omega-3 fatty acids and fucoxanthin.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.463-463
• /
• 2014

Dye-sensitized solar cells (DSSCs) have generated a strong interest in the development of solid-state devices owing to their low cost and simple preparation procedures. Effort has been devoted to the study of electrolytes that allow light-to-electrical power conversion for DSSC applications. Several attempts have been made to substitute the liquid electrolyte in the original solar cells by using (2,2',7,7'-tetrakis (N,N-di-p-methoxyphenylamine)-9-9'-spirobi-fluorene (spiro-OMeTAD) that act as hole conductor [1]. Although efficiencies above 3% have been reached by several groups, here the major challenging is limited photoelectrode thickness ($2{\mu}m$), which is very low due to electron diffusion length (Ln) for spiro-OMeTAD ($4.4{\mu}m$) [2]. In principle, the $TiO_2$ layer can be thicker than had been thought previously. This has important implications for the design of high-efficiency solid-state DSSCs. In the present study, we have fabricated 3-D Transparent Conducting Oxide (TCO) by growing tin-doped indium oxide (ITO) nanowire (NWs) arrays via a vapor transport method [3] and mesoporous $TiO_2$ nanoparticle (NP)-based photoelectrodes were prepared using doctor blade method. Finally optimized light-harvesting solid-state DSSCs is made using 3-D TCO where electron life time is controlled the recombination rate through fast charge collection and also ITO NWs length can be controlled in the range of over $2{\mu}m$ and has been characterized using field emission scanning electron microscopy (FE-SEM). Structural analyses by high-resolution transmission electron microscopy (HRTEM) and X-Ray diffraction (XRD) results reveal that the ITO NWs formed single crystal oriented [100] direction. Also to compare the charge collection properties of conventional NPs based solid-state DSSCs with ITO NWs based solid-state DSSCs, we have studied intensity modulated photovoltage spectroscopy (IMVS), intensity modulated photocurrent spectroscopy (IMPS) and transient open circuit voltages. As a result, above $4{\mu}m$ thick ITO NWs based photoelectrodes with Z907 dye shown the best performing device, exhibiting a short-circuit current density of 7.21 mA cm-2 under simulated solar emission of 100 mW cm-2 associated with an overall power conversion efficiency of 2.80 %. Finally, we achieved the efficiency of 7.5% by applying a CH3NH3PbI3 perovskite sensitizer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.1
• /
• pp.42-47
• /
• 2017

In this study, the physical and optical properties of $ZnS:Mn^{2+}$ Quantum Dot prepared by wet-process condition with Mn/Zn ratio was valuated. The powder characteristics and optical behavior were investigated through XRD, TEM and Photo spectrometer exicted by various UV light source. We found the main peak of ZnS (111) was shifted by 0.8 degree to low angle position with increasing stirring energy from 200 RPM to 600 RPM, which is thought to be the increase of lattice defects during wet process. The photo luminescence at 600 RPM shows also higher blue intensity which is well correlated with XRD results. With increasing Mn/Zn ratio, the PL intensity become higher and shifed by 8.5nm to right side, by the increment of substitutional $Mn^{2+}$ ions.

• Journal of the Korean Society of Tobacco Science
• /
• v.23 no.2
• /
• pp.109-114
• /
• 2001

A CAB cDNA vector(pKGCAB), encoding the light harvesting chlorophyll a/b binding protein in Korean ginseng (Panax ginseng C. A. Meyer), was constructed with the CaMV35S promoter of plant expression vector. The chimeric vector was transformed into tobacco(Nicotiana tabacum cv. NC 82) using Agrobacterium tumefaciens LBA 4404 strain, and the transgenic tobacco plant CAB-TP2 was selected. Photosynthetic rates of the CAB-TP2 plant at before-flowering stage were increased about 20% under low irradiance conditions of quantum 100 and 500 $\mu$mol.m$^{-2}$ s$^{-1}$ , however, the rates were similar to those of NC 82 under quantum 1000 and 2000 $\mu$mol.m$^{-2}$ s$^{-1}$ conditions. The plants were germinating under low- or normal irradiance condition and the quantum yield of photosystem III were measured. The differences of the Fv/Em values between conditions were 0.07 and 0.01 in NC 82 and CAB-TP2, respectively. The mature leaves in the position 8-10 of the CAB-TP2 at before-flowering stage revealed l0% higher Fv/Fm values in range of 0.759 to 0.781 and 40% more chlorophyll contents of 70-93mg/$m\ell$ than those of normal NC 82. These data suggest the possibility that the increase in photosynthetic activity of leaves under low light intensity in the canopy of CAB-TP2 transgenic tobacco might lead to increase the quality of lower tobacco leaves.