• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.491-496
• /
• 1998

The composition of isocyanates and polyols influence prepolymeric properties of adhesive and calking sealant based on polyurethanes (PU). One component moisture curing prepolymers, which reacted with surface humidity of substrate, were synthesized in several kinds of composition. Reactivity, structural change and properties of the prepolymers were studied as a preliminary step to manufacture PU based adhesive and sealant. To study the effects of mole ratio ([NCO]/[OH]), we used toluene diisocyanate (TDI), 4, 4'-diphenylmethane diisocyanate (MDI), and ether-polyols such as PTMG and PPG which have good resistance to hydrolysis and excellent low-temperature properties. The each prepolymers could be prepared in different molecular weight without any significant structural change. The mole ratio 1.78 of [NCO] to [OH] showed the fastest reactivity. It was confirmed that effect of polyols was larger than that of isocyanates on the prepolymer in reactivity. Several kinds of compounds were manufactured with each prepolymer, and tensile and properties were tested. And the optimum quantity of curing accelerator for the PU was 0.05~0.1%. In the tensile test, TDI based PU was superior to MDI based PU, and also PTMG based PU was superior PPG based PU.

• Atmosphere
• /
• v.21 no.1
• /
• pp.35-44
• /
• 2011

We investigated characteristics of new particle formation and growth events observed at Gosan climate observatory using Scanning Mobility Particle Sizer (SMPS) measurements of particle number size distribution with 54 size ranges from 10 to 487 nm in October 2009. Four days (17~20 October) and five days (22~26 October) were classified into strong new particle formation and growth event ($N_S$) and weak particle formation and growth event ($N_W$), respectively. $N_S$ and $N_W$ divided by increase of aerosol number concentration in nucleation mode and continuity of growth from nucleation to Aitken mode. Particle growth rates of $N_S$ (5.34~$9.19nm\;h^{-1}$) were greater than that of $N_W$ (2.15~$3.53nm\;h^{-1}$). $N_S$ and $N_W$ were analyzed with synoptic pattern over East Asia, meteorological elements, and sulfur dioxide ($SO_2$) measured at Gosan. We found that $N_S$ was characterized by a fast and northwesterly wind accompanied cold and dry airmass, but $N_W$ was affected airmass originated from South China and come through the Korea Peninsula. The events ($N_S$ and $N_W$) occurred at conditions of high solar flux ($&gt;700W\;m^{-2}$) and low relative humidity (< 60%). The $SO_2$ concentration on $N_S$ and $N_W$ was higher than that on case of non observed new particle formation.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.3
• /
• pp.164-171
• /
• 2014

A highly sensitive and selective non-enzymatic glucose sensor has gained great attention because of simple signal transformation, low-cost, easily handling, and confirming the blood glucose as the representative technology. Until now, glucose sensor has been developed by the immobilization of glucose oxidase (GOx) on the surface of electrodes. However although GOx is quite stable compared with other enzymes, the enzyme-based biosensors are still impacted by various environment factors such as temperature, pH value, humidity, and toxic chemicals. Non-enzymatic sensor for direct detecting glucose is an attractive alternative device to overcome the above drawbacks of enzymatic sensor. Many efforts have been tried for the development of non-enzymatic sensors using various transition metals (Pt, Au, Cu, Ni, etc.), metal alloys (Pt-Pb, Pt-Au, Ni-Pd, etc.), metal oxides, carbon nanotubes and graphene. In this paper, we show that Ni-based nano-particles (NiNPs) exhibit remarkably catalyzing capability for glucose originating from the redox couple of $Ni(OH)_2/NiOOH$ on the surface of ITO electrode in alkaline medium. But, these non-enzymatic sensors are nonselective toward oxidizable species such as ascorbic acid the physiological fluid. So, the anionic polymer was coated on NiNPs electrode preventing the interferences. The oxidation of glucose was highly catalyzed by NiNPs. The catalytically anodic currents were linearly increased in proportion to the glucose concentration over the 0~6.15 mM range at 650 mV versus Ag/AgCl.

• Journal of Wetlands Research
• /
• v.22 no.4
• /
• pp.312-320
• /
• 2020

Various LIDs with natural water circulation function are applied to reduce urban environmental problems and environmental impact of development projects. However, excessive Infiltration and evaporation of LID facilities dry the LID internal soil, thus reducing plant and microbial activity and reducing environmental re duction ability. The purpose of this study was to develop a real-time measurement system with complex sensors to derive the management plan of LID facilities. The test of measurable sensors and Internet of Things (IoT) application was conducted in artificial wetlands shaped in acrylic boxes. The applied sensors were intended to be built at a low cost considering the distributed LID and were based on Arduino and Raspberry Pi, which are relatively inexpensive and commercialized. In addition, the goal was to develop complex sensor measurements to analyze the current state o f LID facilities and the effects of maintenance and abnormal weather conditions. Sensors are required to measure wind direction, wind speed, rainfall, carbon dioxide, Micro-dust, temperature and humidity, acidity, and location information in real time. Data collection devices, storage server programs, and operation programs for PC and mobile devices were developed to collect, transmit and check the results of measured data from applied sensors. The measurements obtained through each sensor are passed through the Wifi module to the management server and stored on the database server in real time. Analysis of the four-month measurement result values conducted in this study confirmed the stability and applicability of ICT technology application to LID facilities. Real-time measured values are found to be able to utilize big data to evaluate the functions of LID facilities and derive maintenance measures.

• Membrane Journal
• /
• v.20 no.4
• /
• pp.278-289
• /
• 2010

A series of composite membranes based on sulfonated poly(arylene ether sulfone) (SPAES) were prepared via addition of tetraethyl orthosilicate (TEOS) and solution casting method. The morphological structure, water uptake, proton conductivity of the resulting composite membranes were extensively investigated as function of the content of TEOS. By the sol-gel reaction, TEOS molecules were not completely converted to $SiO_2$ particles, but formed only oligomer-type. Also, EDS confirms that the resulting silicon dioxide was homogeneously distributed in the composite membranes. As the content of TEOS increased, the prepared membranes increased water uptake and proton conductivity at high temperature and low relative humidity condition. In particular, considerably high proton conductivity (0.015 S/cm) at $120^{\circ}C$ and 48%RH was demonstrated in the composite membrane containing 200% TEOS, which is 10 times greater than that of unmodified SPAES membrane. Also, the composite membranes were found to have enhanced thermal stability compared to the unmodified membrane.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.4
• /
• pp.439-458
• /
• 2005

An automated analysis system for water soluble constituents in $PM_{2.5}$ has been developed. The system consists of a high capacity multi tube diffusion scrubber (MTDS), a low temperature particle impactor (LTPI), and two ion (anion and cation) chromatography (IC) systems. Atmospheric particles have been collected by passing sample air through a thermostated MTDS followed by a LTPI. This system allows simultaneous measurements of soluble ions in $PM_{2.5}$ at 30 minutes interval. At the air sampling flow rate of 1.0L/min, the detection limits of the overall system are in the order of tens of $ng/m^3$. This system has been successfully used for the measurement of particulate components of Seoul air from April 2003 to January 2004. $SO_4^{2-},\;NO_3^-,\;NH_4^+,\;NO_2^-,\;Cl^-,\;Na^+,\;K^+,\;Ca^{2+},\;and\;Mg^{2+}$ are the major ionic species for $PM_{2.5}$ at Seoul. Among them, $SO_4^{2-},\;NO_3^-\;and\;NH_4^+$ are the most abundant ions, contributed up to $86\%$ of the total and the concentrations were higher than those in any other urban sites in the world except for Chinese cities. There are high pollutant episodes which contribute about $15\~20\%$ of annual average values of the major ions. During the episode, the all parcels were transported from the asian continent and $PM_{2.5}$ were significantly neutralized. This suggests that aged and long range transported pollutants caused the high pollutant episodes. They showed a distinct daily and seasonal variations:they showed a peak in the early morning caused by the night-time accumulation of particulate matters. Atmospheric reactions including gas-to-particle reactions and inter-particle reactions and meteorological parameters including relative humidity and ambient temperature were described with related to the $PM_{2.5}$ 5 concentrations. All of the ionic species showed higher concentrations during the spring than those for summer and winter.

• Preventive Nutrition and Food Science
• /
• v.4 no.2
• /
• pp.130-133
• /
• 1999

Body fat-reducing ability of oyster mushroom (Pleurotus ostreatus) water extract (OMWE) was investigated of mice by supplying it drinking water. OMWE(2.95% solid content ) was prepared by extracting a low grade of the mushroom at 12$0^{\circ}C$ for 10min. The solid material of OMWE was composed of 65.2% reducing sugar, 0.23% crude fat, 0.5%total protein, 1.2% ash and 32.9% others. OMWE was appropriately diluted with drinking water. Seventy two male ICR mice(25$\pm$1 g, 7~8 weeks of age, 6 mice/cage, 18 mice/treatment) housed in polycarbonate cages containing $\beta$-chips were adopted in a temperature-and humidity-controlled facility with free access to water and diet. One week later, the mice were subjected to one of the treatments for 36days : 0 (control), 10, 50 and 100% OMWE. Drinking wter with or without OMWE was supplied twice (40ml each, 80ml in total ) daily per cage. Body weight and fed intake were recorded every three days. At the end of the experiment, mice were sacrificed to determine the chemical composition (fat, protein, ash and water). Body weight of mice treated with OMWE (10, 50 and 100%) at day 36 was 35.9, 35.9and 35.5g per mouse , respectively, and not significantly reduced as compared to that (36.5g/mouse) of control mice. Average body fat of 0,10,50 and 10% OMWE -treated mice was 14.3, 13.1, 10.7 and 12.0% , respectively. Body fat reduction by 50% OMWE treatment was 25.2% (p<0.05) relative to control. OMWE did not affect feed intake. The contents of body protein and ash were increased with respect to body fat decrease, while water content was not changed much. These results suggest that OMWE could reduce body fat of the mice without body weight change, giving the best effect by 50% OMWE.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.17 no.3
• /
• pp.191-197
• /
• 1988

Sorption properties of corn starch(CS) and Soy protein isolates(SPI) in plastic films packaging were investigates for binary system. The mixture were sealed in plastic films of low density polyethylene(LDPE), oriented polypropylene(OPP) and LDPE/OPP coated film and packaging effect on the changes of moisture sorption during storage at $40^{\circ}C$ were studied. The following results were obtained. The water vapor permeability of material films was $32.6g/m^2/24hrs(below\;g)$ for 0.02mm LDPE film, 14.01g for 0.04mm LDPE film, 7.30g for 0.02mm OPP film, 3.37g for 0.04mm OPP film and 4.869 for 0.02mm LDPE/0.02 mm OPP confine film at $40^{\cire}C$ 90%RH, therefore the OPP film was more effective than LDPE film on the resistance of relative humidity. And the OPP film packaging sealed mixture of food samples was also more elective then LDPE film, having same thickness for increase of water vapor permeability during storage at $40^{\cire}C$. A general increase in sorption rate was found more in SPI than CS in the packaged mixtures.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.2
• /
• pp.203-209
• /
• 2008

Recrystallization characteristics of salt after removing bittern and impurities from solar salt (SD) were investigated. To remove the bittern, the SD was treated at 30, 40 and $50^{\circ}C$ under 95% humidity. 86% of the bittern was removed when the SD was kept at $30^{\circ}C$ for three weeks. Total amount of impurity in SD was 6.94% (w/w) with organic impurity (5.58%) and inorganic impurity (1.36%). Most organic impurities (89%) were soluble. When the SD was roasted at $350^{\circ}C$ for 40 minutes, 90.14% of the soluble organic impurities were removed; however, the removable organic impurity was reduced, when the SD roasted for 50 minutes at $350^{\circ}C$. L* value decreased while a* and b* values increased when the SD was roasted until 40 minutes at $350^{\circ}C$. In contrast, L* value increased while a*, b* values decreased with SD roasted over 50 minutes at $350^{\circ}C$. The size of recrystallized pure salt was positively correlated to temperature and depth of salt solution, while the crystallization time was negatively correlated to temperature and salinity. Yield of recrystallized salt was negatively correlated to temperature. Overall acceptability tended to increase at low crystallization temperature and high salinity.

• Korean Journal of Agricultural Science
• /
• v.28 no.1
• /
• pp.18-26
• /
• 2001

Application of the Asian ladybird (Harmonia axyridis) to control several species of aphids in the plastic green houses in mind, control effects of aphid populations regulated by the Asian ladybird were observed. The green peach aphid, the turnip aphid, and the cotton aphid were present on mustard plants, Angelia utlis, ornamental kales, and egg plants at greenhouses in spring, summer, and winter. Adults and larvae of the Asian ladybird used in experiments were collected from aggregated sites at Taejon in the autumn and reared on the cotton aphid in the laboratory. In winter, more number of adults and larvae of ladybirds than in other seasons were needed to control aphid population in successively double plastic greenhouses with supplied subterranean water for keeping warmth. In spring and summer, it was possible to keep the aphid populations low when necessary by manipulating ladybird populations according to the density of aphids. On the other hand, the innate increasing rate of aphid, the aphid population density at the time of applying ladybird, the predacious ability of ladybird at specific developmental stages, and needed periods should be taken into account to control aphids. In addition, the environmental factors, for example, optimum temperature and humidity should be considered to be biologically effective when ladybirds are released to greenhouses.