• 한국태양에너지학회 논문집
• /
• 제37권6호
• /
• pp.103-114
• /
• 2017

Radiation energy budget was analyzed using observation data from the Weather Information Service Engine (WISE) energy flux tower on the Seoul metropolitan area. Among observation data from the 13 energy flux towers, we used meteorological variables, radiation data (upward and downward short wave, upward and downward long wave, net short wave, net long wave and net radiation), albedo and emissivity for 15 months from July 2016 to September 2017. Although Gajwa (205) and Ttuksumm (216) sites located in urban, the albedo was relatively high due to the surround environment by glass wall buildings and the Han river around the sites. And Bucheon (209) site located in the suburb represented generally low emissivity. As a result, the albedo decreased and the emissivity increased in the city center. In the Seoul metropolitan area, the net radiation energy is $73.9W/m^2$ that the radiation budget of the surface is absorbed into the atmosphere. According to WISE observation data, it can be seen that observation at each sites are influenced by the surrounding environment.

• 한국세라믹학회지
• /
• 제45권7호
• /
• pp.387-394
• /
• 2008

The Physical property changes of calcined clay by carburization were investigated studied. The carburization mechanism is the penetration of carbon which occurred during incomplete fuel combustion into crevice of clay structure. The experiments for elasticity and freeze-thaw resistance were conducted, and the results can be summarized as follows: Dynamic modulus of elasticity and also freeze-thaw resistance of calcined clay by carburization treatment increased more than 92% after testing 300 cycle, which was more improved than 88% of calcined clay. Therefore, it can decrease the possibility of winter-sowing, which is one the weakness of calcined clay. It is on the basis of the fact that the porosity of calcined clay by carburization treatment is about 12%, which indicates smaller pore spaces comparing with the 14% of porosity of calcined clay and those values were calculated by apparent porosity show and also supported by SEM images. Infrared emissivity of calcined clay by carburization treatment and calcined clay were respectively 0.92 and 0.9l at $80^{\circ}C$. However, those values were 0.91 and 0.88 at $200^{\circ}C$, which means infrared emissivity of calcined clay by carburization treatment shows 3.6% higher than the calcined clay. Moreover, within the wavelength range from 3 to $7\;{\mu}m$, while the calcined clay had low infrared emissivity, the calcined clay by carburization treatment had increased infrared emissivity. It is inferred that it was affected by carbon element that has high infrared absorptivity within this wavelength range.

• 한국표면공학회지
• /
• 제56권6호
• /
• pp.451-456
• /
• 2023

Transparent conducting films having a three layered structure of ZnO/Cu/ZnO (ZCZ) were deposited onto the glass substrates by using RF and DC magnetron sputtering at room temperature. The emissivity and opto-electrical properties of the films were investigated with a varying thickness(5, 10, 15 nm) of the Cu interlayer. With increasing the Cu thickness to 15 nm, the films showed a enhanced electrical properties. Although ZnO 30/Cu 15/ZnO 30 nm film shows a lower resistivity of 5.2×10^-5 Ωcm, it's visible transmittance is deteriorated by increased optical absorbtion of the films. In addition, X-ray diffraction patterns indicated that the insertion of Cu interlayer improve the grain size of ZnO films, which is favor for the electrical and optical properties of transparent conducting films. From the observed low emissivity of the films, it is concluded that the ZCZ thin films with optimal thickness of Cu interlayer can be applied effectively for the car's window coating materials.

• 한국재료학회지
• /
• 제19권12호
• /
• pp.649-656
• /
• 2009

Inorganic oxide colloids dispersed in alcohol were applied to a stainless steel substrate to produce oxide coatings for the purpose of minimizing emissive thermal transfer. The microstructure, roughness, infrared emissive energy, and surface heat loss of the coated substrate were observed with a variation of the nano oxide sol and coating method. It was found that the indium tin oxide, antimony tin oxide, magnesium oxide, silica, titania sol coatings may reduce surface heat loss of the stainless steel at 300${\circ}C$. It was possible to suppress thermal oxidation of the substrate with the oxide sol coatings during an accelerated thermal durability test at 600${\circ}C$. The silica sol coating was most effective to suppress thermal oxidation at 600${\circ}C$, so that it is useful to prevent the increase of radiative surface heat loss as a heating element. Therefore, the inorganic oxide sol coatings may be applied to improve energy efficiency of the substrate as the heating element.

• 한국생산제조학회지
• /
• 제21권4호
• /
• pp.582-587
• /
• 2012

Recently, the low-emissivity glass has been used to reduce the energy loss through building windows. However, it simply reduces the inflow of solar rays and has a relatively high heat transmission coefficient. To solve the problems, a high-efficiency vacuum glazing has been under development but it has not been actively used due to its high price and insufficient performance. In this paper, the effects of internal pressure, pillar (spacer) height, pillar diameter, pillar interval, emissivity etc. on the performance of vacuum glazing have been analyzed with three-dimensional computational fluid dynamics and structural analysis. As a result, the performance of vacuum glazing was predicted more accurately and major factors that determine the performance of vacuum glazing were optimized.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 하계학술발표회
• /
• pp.34-35
• /
• 2001

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 제13회 정기총회 및 2002년도 동계학술발표회
• /
• pp.222-223
• /
• 2002

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2003년도 학술대회지
• /
• pp.341-344
• /
• 2003

도심지내 대형화, 고층화 공사에서는 증가하는 자재의 종류와 양에 비해 한정된 공간과 장비의 제한 등의 문제로 효용성 제고가 요구되고 있어 물류관리의 중요성이 강조되어지고 있다. 이러한 제약들로 인해 공사비 증대, 공기지연, 생산성 저하, 안전사고 발생 등의 문제를 야기 할 수 있다. 이러한 현장 내 물류관리의 문제점들을 해결하기 위하여 적시생산(just-in-time. 이하JIT)관리개념에 대한 관심이 높아지고 있으며 건설자재의 기존 물류흐름 프로세스를 개선한 양중 및 조달의 다양한 시도가 이루어지고 있다. 현재 콘크리트와 같은 주요 자재의 JIT적용 연구는 이미 많은 연구와 수행이 진행이 되고 있으나 마감자재에 대한 연구는 아직 미비하다 하겠다. 이에 커튼월과 더불어 주요 마감자재라 할 수 있는 유리, 그중 Low-emissivity 복층유리(이하 Low-e 유리)를 적용하여 현재의 물류관리 흐름 파악과 JIT관리 적용시 발생하는 효과와 양중조달 시스템 개발방향을 제시하는 것이다.

• 열처리공학회지
• /
• 제28권3호
• /
• pp.134-138
• /
• 2015

Ag intermediated $TiO_2$ films were deposited by RF and DC magnetron sputtering and then vacuum annealed at 100, 200 and $300^{\circ}C$ for 30 minutes to investigate the effect of annealing temperature on the structural and optical properties of the films. For all depositions, the thickness of the $TiO_2$ and Ag films were kept constant at 24 and 15 nm by controlling the deposition time. As-deposited $TiO_2/Ag/TiO_2$ trilayer films have a weak crystalline and an optical reflectance in a near infrared wavelength region of 77.8%, while the films annealed at $300^{\circ}C$ show the polycrystalline structure and an increased mean optical reflectance of 80.4%. From the experimental results, it can be concluded that increasing the annealing temperature enhanced the structural and optical properties of the $TiO_2/Ag/TiO_2$ films.

• 한국표면공학회지
• /
• 제40권1호
• /
• pp.6-10
• /
• 2007

For low-emissivity application on window glass, coalescence of thin film silver islands is crucial for high transmittance in the visible and high reflectance in the infrared. It is well known that the underlayer affects the growth mode. In this work, the effect of the underlayer on the growth of silver films deposited by filtered cathodic vacuum arc is discussed. While a nominal 0.1 nm niobium underlayer has promoted the coalescence of silver islands, a 0.2 nm layer did not show these features. From a thermodynamic approach, Nb seeding less one monolayer is considered to reduce the surface energy between the silver atoms and $Nb/TiO_2$ surface, resulting the change of its growth from 3D islands to 2D-layer modes. If the seed layer exceeds one monolayer, however, a rougher surface is formed because the surface energy of Nb itself is superior to that of $Nb-TiO_2$. The onset of silver layer on the roughened Nb surface is required more silver.