• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.47-48
• /
• 2014

This study is to hydration property of low carbon type recycled cement from waste cementitious powder and cement raw materials. Waste cementitious powder possible to low carbon type recycled cement in small part of additive materials. Also, low carbon type recycled cement using waste cementitious powder is suitable for low heat type cement.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.252-253
• /
• 2014

This study is to XRD and image analysis of low carbon type recycled cement from waste concrete powder and cement raw materials. Waste concrete powder possible to low carbon type recycled cement in small part of additive materials. Also, low carbon type recycled cement using waste concrete powder is suitable for ordinary portland cement.

• 한국건축시공학회지
• /
• 제13권3호
• /
• pp.218-226
• /
• 2013

건설재료 중 시멘트 및 철강은 대표적으로 탄산가스를 발생시키는 재료산업이다. 건설 산업에서의 탄소 배출량 감소를 위해서는 이러한 재료의 사용을 감소시키는 것이 가장 효과적이라고 할 수 있다. 본 연구에서는 시멘트의 사용량을 감소시킨 저발열형 혼합시멘트의 개발을 목적으로 하고 있다. 시멘트 혼합 비율을 10 %로 낮춘 저탄소 배출형 저발열 혼합시멘트의 수화 특성 및 콘크리트의 온도상승 특성을 검토하였다. 시험 결과, 혼화재의 반응 활성화를 위해서는 CaO 및 $SO_3$의 공급원 필요하며, 석고 및 생석회를 적정 배합비율 적용할 경우 초기에는 강도 발현이 다소 지연되지만 장기재령에서는 기존의 저발열 혼합시멘트와 유사한 성능을 확보 가능한 것으로 나타났다. 특히 저탄소 저발열 혼합시멘트의 경우 콘크리트의 수화열도 기존 저발열 혼합시멘트에 비해 감소시킬 수 있는 것으로 나타났다.

• 한국재료학회지
• /
• 제13권2호
• /
• pp.94-100
• /
• 2003

The interface between low carbon steel and blended cement pastes containing slag was investigated using impedance spectroscopy. In addition, the pastes were characterized by several analytical methods (XRD, EDX, electrode potential, pH and ICP). The electrical behavior of the interface in the blended slag systems is correlated to its corresponding pore solution chemistry and the products present in the interface. Passivation occurred at the paste/steel interfaces, in cement pastes up to containing from 0 to 75% slag content. 100% slag paste induced corrosion of the low carbon steel, which could be explained by the influence of sulfur on the system.

• International Journal of Concrete Structures and Materials
• /
• 제9권4호
• /
• pp.427-438
• /
• 2015

The present work proposes a new image analysis method for the evaluation of the multi-walled carbon nanotube (MWNT) distribution in a cement matrix. In this method, white cement was used instead of ordinary Portland cement with MWNT in an effort to differentiate MWNT from the cement matrix. In addition, MWNT-embedded cement composites were fabricated under different flows of fresh composite mixtures, incorporating a constant MWNT content (0.6 wt%) to verify correlation between the MWNT distribution and flow. The image analysis demonstrated that the MWNT distribution was significantly enhanced in the composites fabricated under a low flow condition, and DC conductivity results revealed the dramatic increase in the conductivity of the composites fabricated under the same condition, which supported the image analysis results. The composites were also prepared under the low flow condition (114 mm < flow < 126 mm), incorporating various MWNT contents. The image analysis of the composites revealed an increase in the planar occupation ratio of MWNT, and DC conductivity results exhibited dramatic increase in the conductivity (percolation phenomena) as the MWNT content increased. The image analysis and DC conductivity results indicated that fabrication of the composites under the low flow condition was an effective way to enhance the MWNT distribution.

• 한국건설순환자원학회논문집
• /
• 제7권1호
• /
• pp.22-28
• /
• 2019

시멘트는 건설업에의 기초소재이지만 시멘트 제조시 고온의 소성이 필요하고, 소성시의 원료 및 연료로부터 발생하는 $CO_2$는 새로운 환경문제로 인식되어 이를 저감하기 위한 노력이 지속되고 있다. 콘크리트 분야에서의 $CO_2$ 저감을 위한 기술은 고로슬래그 및 플라이애시 등의 혼합시멘트 사용을 권장하는 것이 저감 대책의 대부분을 차지하고 있다. 또한 콘크리트 구조물 해체 시 발생하는 건설폐기물도 또 다른 환경문제로 인식되며 재활용률을 높이기 위한 여러 가지 방안들이 시행되고 있다. 본 연구는 구조물 해체 시 발생하는 무기계 재생원료를 리사이클을 통해 시멘트 제조의 원료로서 활용하기 위한 것이다. 폐콘크리트, 폐시멘트블록, 폐점토벽돌 및 폐천장재 미분말의 원료조성 검토를 통해 시멘트의 원료로서 활용하고자 한다. 연구결과 재생원료의 원료조성 및 조합을 통해 저탄소형 수경성 시멘트 결합재 제조가 가능한 것을 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.107-108
• /
• 2021

In the global trend of countries around the world announcing the declaration of carbon neutrality, the development of low-carbon cement in the cement industry can be seen as a very important issue that can determine the future development of the cement industry in the future. Therefore, this study evaluated the strength characteristics of limestone cement paste with limestone powder of CaCO3 and refinery desulfurization waste catalyst of high Al₂O₃ content, and using a Minitab mixture design to optimize a limestone cement content. As a resuls it was confirmed that limestone cement paste with 5-10% of limestone powder and 1.25-2.5% of the waste catalyst exhibits similar compressive strength to that of OPC.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.55-56
• /
• 2011

This study is to investigate the engineering properties of low heat concrete incorporating improved ternary blended cement by combining OPC(original portland cement), blast furnace slag and fly ash. The results were summarized as following ; For ITB(Improved Ternary Blend)mixture was that setting time proved to be accelerated, and adiabatic temperature rises were low. The use of ITB resulted in an increase of initial compressive strength.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.164-165
• /
• 2013

This study is on the performance evaluation of concrete being used the CaMg based low carbon cement(LCC) as a binder and the rapidly cooled electric arc furnace oxidizing slag(EAF slag) as a fine aggregate. When using the sand as a fine aggregate, compressive strength of the concrete using LCC, as a binder, was reduced 9% comparing with that of OPC concrete. However, when using the EAF slag as a fine aggregate, the compressive strength was increased by 9%. We found that combination LCC and EAF slag contribute to the strength properties of concrete.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.47-48
• /
• 2023

In the domestic industrial sector, greenhouse gases emitted from the cement industry account for about 10%, with most of them generated during the cement clinker calcination process. During the calcination process, 57% of carbon dioxide is emitted from the decarbonation reaction of limestone, 30% from fuel consumption, and 13% from electricity usage. In response to these issues, the cement industry is making efforts to reduce carbon dioxide emissions by developing technologies for raw material substitution and conversion, improving process efficiency by utilizing low-carbon alternative heat sources, developing CO₂ capture and utilization technologies, and recycling waste materials. In addition, due to the limitations in purchasing and storing industrial byproducts generated from industrial facilities, many studies are underway regarding the recycling of construction waste. Therefore, this study analyzes the manufacture of calcium silicate cement (CSC), which can store carbon dioxide as carbonate minerals in industrial facilities, and aims to contribute to the development of environmentally friendly regenerated cement using construction waste.