• Journal of the Korean Society of Safety
• /
• v.16 no.2
• /
• pp.117-120
• /
• 2001

Low back pain has been known as the most frequent musuculoskeletal disorders in modern industrial society and cost by low back pain is increasing mon and more. The asymmetric lifting has been identified as a major risk factor of low back pain. In this study, the muscle activity and muscle exertion level during asymmetric load handling (without trunk flexion) was estimated. The results of normalized MVC measurement were decreased about 16％, 24％, 34％ respectively as the asymmetric angle was $30^{\circ}$, $60^{\circ}$, $90^{\circ}$. From the results of EMG measurement contralateral muscles were more active than ipsilateral muscles. RMSEMG values of right erector spinae muscles were decreased as the work posture went to 90$^{\circ}$ and those of left erector spinae muscles were increased until the asymmetric angle was 40$^{\circ}$ but decreased continually over 40$^{\circ}$. And for seven of subjects, activities of left and right latissimus dorsi muscles were maintained constantly, while for remainer, those were irregular.

• Journal of Preventive Medicine and Public Health
• /
• v.26 no.1 s.41
• /
• pp.20-36
• /
• 1993

Work-related low back pain is one of the major factors that cause the loss of working power especially in actively working age, therefore controlling the work-related low back pain is one of the major issues in the field of industrial safety and health. This study was performed for detecting the risk factors and proposing the efficient control program of the work-related low back pain. The subjects were male workers employed at the manufacturing industry in Pusan with longer than 6 months' working duration. The data was collected by self-reported questionnaire and interview from May 1 to October 31,1992. The contents of questionnaire were as follows:. the experience of low back pain within the recent one month, general characteristics(age, marital status, education level, religion, regular exercise), physical characteristics(height, weight), employment status(working duration, daily working hours, rest during work, satis(action fur the job), type of work and working environments(posture, forward bending, lifting and movement, satisfaction for table and chair). The result was analyzed for 608 entire respondents by case-control comparative method. The number of cases was 152 with a history of work-related low back pain, so the relative frequency of self-reported work-related low back pain was 25.0%, and the number of controls was 344 without any history of low back pain. As a result, two characteristics of the employment status(working duration, satisfaction fur the job) and all characteristics of type of work and working environments showed a statistical significance between the case and control groups(p<0.01). The Oddb ratios of these variables for Work-related low back pain were calculated. They were 7.88 for the satisfaction fur chair, 7.86 for lifting and movement,3.31 for satisfaction for table, and 2.22 fur bending forward(p<0.01). And for the multivariate logistic regression analysis confirmed that unsatisfaction for table was independent risk factor for Work-related low back pain. In summary, though this study was based upon the self-reported questionnaire and the subjective complaints, the satisfaction for chair, lifting and movement, satisfaction for table, and bending forward concerned with the type of work and working environments were considered as the main factors causing the work-related low back pain, and the work-related low back pain may be preventable by the ergonomic control of these factors.

• Transactions of Materials Processing
• /
• v.16 no.1 s.91
• /
• pp.48-53
• /
• 2007

LCD-BLU(Liquid Crystal Display - Back Light Unit) consists of several optical sheets: LGP(Light Guiding Plate), light source and mold frame. The LGP of LCD-BLU is usually manufactured by etching process and forming numerous dots with $50{\mu}m$ in diameter on the surface. But the surface roughness of LGP with etched dots is very high, so there is much loss of light. In order to overcome the limit of current etched dot patterned LGP, optical pattern design with microlens of $50{\mu}m$ diameter was applied in the present study. The microlens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP and optical simulation was carried out to know tendency of microlens patterned LGP simultaneously. The attention was paid to the effects of different aspect ratio(i.e. $0.2\sim0.5$) of optical pattern conditions to the brightness distribution of BLU with microlens patterned LGP. Finally, high aspect ratio microlens patterned LGP showed superior results to the one made by low aspect ratio in average luminance.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.769-776
• /
• 2007

The comprehensive Topic of Total Quality Management (TQM) has been put forward since the 6^th decade in industrial countries. The serious attention to it in developing countries goes back to recent years. Unfortunately serious attention is not paid to quality issues in building industry. Therefore, the construction of buildings is highly vulnerable against natural events while having low effective lifetime. Wide-range destruction of the residential buildings in the earthquake of Bam ( in IRAN ) is a clear proof for this claim. In this paper we tried to present the corresponding effects between quality issues and other aspects of a building project (such as costs) and proposed general solutions to improve quality indices in construction industry.

• Safety and Health at Work
• /
• v.6 no.2
• /
• pp.120-127
• /
• 2015

Background: Musculoskeletal pain (MSP) is a common and disabling problem among carpet weavers and is linked to physical and psychosocial factors of work. This study aimed to determine the prevalence of MSP, its psychosocial risk factors, and association of pain in each pair of anatomical sites among carpet weavers. Methods: A cross-sectional study was performed among 546 hand-woven carpet weavers in rural small-scale workshops of Iran. Data were collected by using parts of a standardized CUPID (Cultural and Psychosocial Influences on Disability) questionnaire focused on MSP in 10 body sites, including the low-back, neck, both right and left shoulders, elbows, wrists/hands, individual, physical and psychosocial risk factors. Statistical analysis was performed applying logistic regression models. Results: Prevalence of MSP in at least one body sitewas 51.7% over the past month. The most common sites were low back and right shoulder pain 27.4% and 20.1%, respectively. A significant difference was found between the mean number of painful anatomical sites and the level of education, age, physical loading at work, time pressure, lack of support, and job dissatisfaction. In pairwise comparisons, strongest association was found between pain in each bilateral anatomical site (odds ratio = 11.6-35.3; p < 0.001). Conclusion: In home-based workshops of carpet weaving, psychosocial factors and physical loading were associated with MSP. This finding is consistent with studies conducted among other jobs. Considering the preventive programs, the same amount of attention should be paid to psychosocial risk factors and physical loading. Also, further longitudinal studies are needed to investigate the relationship of psychological factors.

• Journal of the Korean Home Economics Association
• /
• v.18 no.4
• /
• pp.31-39
• /
• 1980

The basic pattern of skirt should be functional in addition to be fit the body. The author paid special attention to the expansion and contraction of the shell which were made the lower trunk and thigh caused by sitting motions. The replicas of the shell were taken by using a gypsum method on 1 female under 4 standardized motions; standing motion, (basic motion), sitting on the chair with flextion 90' at the hip and the knee joints sitting with dropping knees, and sitting with benting legs side wards. Those replicas obtained were developed to the patterns and changes in shape and area of those were measured. Typical displacement and transformation of the shell surface patterns were showed geographycally fig 5-1 to 5-4. mean values of expansion and constriction were obtained by measuring the shell surface on 60 female under the 4 motions. the mean values of it were showed numerically in Table 1-1 to 1-3. The following results were obtained; 1. Vertical constriction of front of the shell were observed near sulcus in guinalis, and vertical extension were near the knees. Horizontal extension were observed near the thighs and the knees. 2. Vertical constrictions of the back of the shell were observed near the knees. It seemed to be influnced the flexion angles of knee points. vertical extension were near gluteus and thighs. Horizontal constriction were small, and horizonlal extension were near gluteus. 3. The high rates of constriction and extension were found near sulcus in guinalis, glutes, and knees. 4. The rates of constriction and extension on the waist line were very low. 5. The highest values of constriction and extension were found in hip and knees.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.239-242
• /
• 2006

LCD-BLU (Liquid Crystal Display - Back Light Unit) is one of kernel parts of LCD unit and it consists of several optical sheets(such as prism, diffuser and protector sheets), LGP (Light Guiding Plate), light source (CCFL or LED) and mold frame. The LGP of LCD-BLU is usually manufactured by forming numerous dots with $50{\sim}200$ um in diameter on it by etching process. But the surface of the etched dots of LGP is very rough due to the characteristics of the etching process during the mold fabrication, so that its light loss is high along with the dispersion of light into the surface. Accordingly, there is a limit in raising the luminance of LCD-BLU. In order to overcome the limit of current etched dot patterned LGP, optical pattern design with 50um micro-lens was applied in the present study. The micro-lens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP. The attention was paid to the effects of different aspect ratio (i.e. $0.2{\sim}0.5$) of optical pattern conditions to the brightness distribution of BLU with micro-lens patterned LGP. Finally, high aspect ratio micro-lens patterned LGP showed superior results to the one made by low aspect ratio in average luminance.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.17 no.1
• /
• pp.101-111
• /
• 2015

The purpose of this study is to identify any differences in academic records of students after they got into the Korea National College of Agriculture and Fisheries through the entrance exam. The target group was the students of 1,035 who enrolled from the year of 2012 to 2014 by the exams respectively, and this study compared those first year's records. As a result, this study found that their academic achievements have no significant differences statistically. With regard to the result, we could recognize that the average achievements of students are arithmetically high, who were accepted by admission officer's interview(talented students of agriculture and fisheries) and regular admission procedure to which the scholastic test result is applied. Accordingly, it is more desirable that we should rather focus on measures to improve the admission procedure that could contribute to academic achievements of students who are mostly accepted through the nonscheduled admission. It is pointless to focus on discussion that the achievement of students selected by a particular procedure is low. That kind of criticism proved groundless. Secondly, the study of the correlation between their admission records and after admission records of the freshmen in 2012 shows that a significant difference does not exist whereas those of in 2013 and 2014 has a slightly different statistically, though a coefficient of correlation was a mere 0.17. It account for this result that KNCAF has increased the applied-rate of highschool transcript from 33.3% to 50.0.% in admission procedure from the year of 2013. However, lowering the applied-rate of farming and fishing background is not everything as we consider the graduates' easy settling into rural area. It is a well-known fact that after graduation, the majority of students who have applied for a grace period of the delay in performing the obligation of farming and fishing, and of students who have paid the school expenses back came from ones with no sufficient foothold. This means that we should formulate a supporting policy for the students to settle into rural area smoothly after graduation if we keep the regulation of lowing the applied-rate of farming and fishing.

• Journal of Fisheries and Marine Sciences Education
• /
• v.11 no.1
• /
• pp.69-87
• /
• 1999

This study had been analysed the establishment, the closing and the actual conditions of the fisheries school according to the four times revision and promulgation of the law of education of korea which were devided by the early term (the first Chosun educational decree), the middle term (the second Chosun educational decree) and the last term (the third and fourth Chosun educational decree), and also been investigated how the fisheries education of the school had been acted to the mobocracy and the assimilation policy and together with it's back ground through this analysis. The aim of this study is to contribute to the study of the history of the fisheries school education, analysis of change of the fisheries school education according to practical application of the Chosun educational decree. The summary of the characteristic of the each term are as under. First, in the early term of the fisheries education under the first Chosun educational decree, Experts were despatched to the each province with donated money from emperor and opened seasonal the fishing training centre, a kind of social fisheries education, and trained directly fishing technic and were going to train fisheries trainees regularly under name of elementary fisheries school. Japanese imperialism attached great importance to the vocational education in order to snack economical products from colonized Korea but actually had a purpose to train low quality technician who follow blindly their colony policy of Japanese imperialism. The fisheries schools in the circle of system in early time of Japanese imperialism, Kunsan public elementary fisheries school was established in April 1915, Yosu public elementary fisheries school was established ill May 1917 and Kyungnam Tongyoung training school was established in March 1917. Secondly, After 3.1 movement, the Japanese imperialism established an appeasement policy so called cultural politics and continued assimilation policy with skilful methods. After revision of the second Chosun educational decree, the Elementary vocational school was changed as the vocational training school. The school of fisheries education in middle of Japanese imperialism trained low quality technicians to snack fisheries resources from colonized Korea. After the middle of Japanese imperialism they paid attention on training fisheries technician through fisheries school rather than training school. With high interest and crowded volunteers, Kunsan public fisheries school was promoted in 1922, Tongyoung public fisheries school was promoted in 1923, Yongampo fisheries training school established in 1922 was promoted as Yongampo public fisheries school in 1926. Thirdly, in the time of the third and fourth Chosun educational decree, the end of Japanese imperialism, they met Pacific war after Japan vs China war. During the war time they considered the vocational school as the source of supply for materials and manpower and consequently had to expanded vocational education and systematically despatched students to war field and practiced military training. In 1938, Namhae public fisheries school was established and Chungjin fisheries school was permitted. But in order to supply manpower to Pacific war, the study period of Yosu public fisheries school was shorten from 5 years to 4 year in 1943 and also that of Tongyoung public fisheries school shorten in 1944.

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.2
• /
• pp.107-114
• /
• 2012

Purpose: Unlike the existing linear accelerator with photon, proton therapy produces a number of second radiation due to the kinds of nuclide including neutron that is produced from the interaction with matter, and more attention must be paid on the exposure level of radiation workers for this reason. Therefore, thermoluminescence dosimeter (TLD) that is being widely used to measure radiation was utilized to analyze the exposure level of the radiation workers and propose a basic data about the radiation exposure level during the proton therapy. Materials and Methods: The subjects were radiation workers who worked at the proton therapy center of National Cancer Center and TLD Badge was used to compare the measured data of exposure level. In order to check the dispersion of exposure dose on body parts from the second radiation coming out surrounding the beam line of proton, TLD (width and length: 3 mm each) was attached to on the body spots (lateral canthi, neck, nipples, umbilicus, back, wrists) and retained them for 8 working hours, and the average data was obtained after measuring them for 80 hours. Moreover, in order to look into the dispersion of spatial exposure in the treatment room, TLD was attached on the snout, PPS (Patient Positioning System), Pendant, block closet, DIPS (Digital Image Positioning System), Console, doors and measured its exposure dose level during the working hours per day. Results: As a result of measuring exposure level of TLD Badge of radiation workers, quarterly average was 0.174 mSv, yearly average was 0.543 mSv, and after measuring the exposure level of body spots, it showed that the highest exposed body spot was neck and the lowest exposed body spot was back (the middle point of a line connecting both scapula superior angles). Investigation into the spatial exposure according to the workers' movement revealed that the exposure level was highest near the snout and as the distance becomes distant, it went lower. Conclusion: Even a small amount of exposure will eventually increase cumulative dose and exposure dose on a specific body part can bring health risks if one works in a same location for a long period. Therefore, radiation workers must thoroughly manage exposure dose and try their best to minimize it according to ALARA (As Low As Reasonably Achievable) as the International Commission on Radiological Protection (ICRP) recommends.