• 방사성폐기물학회지
• /
• 제12권4호
• /
• pp.267-274
• /
• 2014

본 연구에서는 중 저준위방사성폐기물 처분시설(이하 처분시설)에서 발생하는 기체의 이동현상을 예측하기 위한 2차원 수치 모델링을 수행하였다. 또한, 기체 이동 모델링에서 주요 입력변수로 적용되는 사일로 콘크리트의 기체침투압(gas entry pressure)와 기체 투과도(gas permeability)를 실측하여, 모델링 입력변수로 적용하였다. 사일로 콘크리트의 기체침투압(gas entry pressure)와 기체 투과도(gas permeability)는 각각 $0.97{\pm}0.15bar$ 및 $2.44{\times}10^{-17}m^2$로 측정되었다. 기체 이동 모델링 결과, 사일로 내부에서 발생하는 수소 기체는 기상으로 이동하지 않고 지하수에 용해되어 지하수와 함께 생태계로 이동하는 것을 알 수 있다. 또한, 폐쇄 후 약 1,000 년 후 부터 사일로 상부부터 수소기체 밀도가 증가하기 시작하는 것으로 예측되었다. 따라서, 사일로 내부에서 발생된 기체는 기상으로 사일로 내부에 축적되지 않으며, 이로 인해 사일로 콘크리트의 내구성에 영향을 미치지 않을 것으로 판단된다.

• Journal of electromagnetic engineering and science
• /
• 제8권2호
• /
• pp.76-83
• /
• 2008

A low power(9 mW) highly-digitized 2.4 GHz receiver for sensor network applications(IEEE 802.15.4 LR-WPAN) is realized by a $0.18{\mu}m$ CMOS process. We adopted a novel receiver architecture adding an intermediate frequency (IF) level detection scheme to a low-power complex fifth-order continuous-time(CT) bandpass L:tl modulator in order to digitalize the receiver. By the continuous-time bandpass architecture, the proposed $\Sigma\Delta$ modulator requires no additional anti-aliasing filter in front of the modulator. Using the IF detector, the achieved dynamic range(DR) of the over-all system is 95 dB at a sampling rate of 64 MHz. This modulator has a bandwidth of 2 MHz centered at 2 MHz. The power consumption of this receiver is 9.0 mW with a 1.8 V power supply.

• Journal of information and communication convergence engineering
• /
• 제9권1호
• /
• pp.59-63
• /
• 2011

Conventional noise reduction filtering schemes realize limited improvements of the peak signal-to-noise ratio (PSNR) in the low-level noisy images. The flatness degree and the edge information are effectively used to estimate the noise volume. We propose a noise estimator for reducing noise in the AWGN (additive white gaussian noise) corrupted images using three intermediate image maps (FGM(flatness gray map), FIM(flatness index map), NEM(noise estimate map)). The proposed noise estimator is fed into the conventional noise reduction filters as a pre-processor. The performance of noise reduction is tested in the various AWGN corrupted images.

• 아시아태평양코퍼스연구
• /
• 제4권2호
• /
• pp.1-39
• /
• 2023

Recent research in usage-based Second Language Acquisition has provided new insights into second language (L2) learners' development of formulaic language (Wulff, 2019). The current study examines the use of phrase-frames, which are recurring sequences of words including one or more variable slots (e.g., it is * that), in written and oral production data from Asian learners of English across four proficiency levels (beginner, low-intermediate, high-intermediate, advanced) and native English speakers. The variability, predictability, and discourse functions of the most frequent 4-word phrase-frames from the written essay and spoken dialogue sub-corpora of the International Corpus Network of Asian Learners of English (ICNALE) were analyzed and then compared across groups and modes. The results revealed that while learners' phrase-frames in writing became more variable and unpredictable as proficiency increased, no clear developmental patterns were found in speaking, although all groups used more fixed and predictable phrase-frames than the reference group. Further, no developmental trajectories in the functions of the most frequent phrase-frames were found in both modes. Additionally, lower-level learners and the reference group used more variable phrase-frames in speaking, whereas advanced-level learners showed more variability in writing. This study contributes to a better understanding of the development of L2 phraseological competence.

• 방사성폐기물학회지
• /
• 제9권2호
• /
• pp.87-92
• /
• 2011

본 논문은 극저준위폐기물 관리에 관한 중국의 정책과 규정들을 소개하고 있다. 오래된 시설의 중요한 해체 및 부지복구 프로그램에 주어진 바와 같이, 극저준위폐기물의 처분을 위한 새로운 시설의 필요성이 대두되고 있다. 여러가지 일반적인 설계원리들은 다중방벽에 의해 폐기물을 격리시키는 중저준위폐기물 처분시설과 같다. 콘크리트 방벽을 사용하는 것 대신에 벤토나이트 또는 고밀도 폴리에틸렌 멤브레인을 사용하는 것 외에 통상적으로 처분시설의 설계는 위해폐기물 처분시설의 설계와 같다 극저준위폐기물 처분시설 2개소의 공학적 설계가 소개되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.694-698
• /
• 2006

This paper presents an optimal design process using beads on a body panel to improve interior noise of a passenger vehicle. Except modification of structural members, it is difficult to find effective countermeasures that can work for the intermediate frequency range from 100 Hz to 300 Hz which lies between the booming and low medium frequency. In this study, it is a major goal to find additional counter-measures for this intermediate frequency range by performing optimal design of beads on body panels. The proposed method for design optimization consists of 4 sub-steps, that is, a) problem definition, b) cause analysis, c) countermeasure development and d) validation. The objective function is minimization of interior noise level. The major design variables are the geometrical shape of a bead and combination of beads on the critical panels. Sensitivity analysis and optimization are performed according to the predefined process for an optimal design. It is verified that the proposed design decreases the level of noise transfer function above 5 dB.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1199-1209
• /
• 2023

Where concrete structures are designed to have a service life of over 100 years, their performance must be monitored, for the prediction models available are fraught with uncertainties that need to be eliminated. The present study was conducted to meet that need by monitoring a pilot structure for low and intermediate radioactive waste storage. Long-term operation of the sensors was observed to be adequate to determine the value of the parameters that characterise structural durability, such as corrosion current density. The parameters analysed were correlated to calculate their reciprocal impact: where applied in conjunction with artificial intelligence tools, temperature, for instance, was found suitable for finding activation energy and expansion coefficients and detecting outliers. The results showed the pilot structure to perform satisfactorily.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2018년도 공동국제학술발표회
• /
• pp.95-95
• /
• 2018

• 한국재료학회지
• /
• 제23권10호
• /
• pp.568-573
• /
• 2013

The deformation properties of a TiC-Mo eutectic composite were investigated in a compression test at temperatures ranging from room temperature to 2053 K and at strain rates ranging from $3.9{\times}10^{-5}s^{-1}$ to $4.9{\times}10^{-3}s^{-1}$. It was found that this material shows excellent high-temperature strength as well as appreciable room-temperature toughness, suggesting that the material is a good candidate for high-temperature application as a structure material. At a low-temperature, high strength is observed. The deformation behavior is different among the three temperature ranges tested here, i.e., low, intermediate and high. At an intermediate temperature, no yield drop occurs, and from the beginning the work hardening level is high. At a high temperature, a yield drop occurs again, after which deformation proceeds with nearly constant stress. The temperature- and yield-stress-dependence of the strain is the strongest in this case among the three temperature ranges. The observed high-temperature deformation behavior suggests that the excellent high-temperature strength is due to the constraining of the deformation in the Mo phase by the thin TiC components, which is considerably stronger than bulk TiC. It is also concluded that the appreciable room-temperature toughness is ascribed to the frequent branching of crack paths as well as to the plastic deformation of the Mo phase.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2018년도 공동국제학술발표회
• /
• pp.96-97
• /
• 2018