• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.4
• /
• pp.334-344
• /
• 2013

In order to understand the characteristics of oceanic environment in the coastal aquaculture waters of the East Sea, the observation of the CTD (temperature and salinity), dissolved oxygen, chlorophyll a and N/P (DIN ($NO_2$-N, $NO_3$-N, $NH_4$-N) : DIP($PO_4$-P)) ratio was carried out at Sokcho, Jukbyon and Gampo in February, April, June, August, October, December 2013. Based on T(temperature)-S(salinity) diagram analysis, the water masses in the study area were divided into 3 groups; Tsushima Surface Water (TSW: $20-28.3^{\circ}C$ temperatures and 31.04-33.75 salinities), Tsushima Middle Water (TMW: $8.1-16.3^{\circ}C$ and 33.00-34.49), and North Korean Cold Water (NKCW: $1.8-9.4^{\circ}C$ and 33.78-34.42). In winter, DO concentrations in the northern part were higher than those in southern part. In spring and fall, they were low in the surface layer, and increased in summer. Chl-a concentrations < $0.4{\mu}g/L$ dominated in February, April, October and December. Chl-a concentrations were higher in June and August. In particular, the highest Chl-a concentration > $2{\mu}g/L$ was observed in the middle layer of Gampo in August. In February, April, June and December, the N/P ratio in the most of the water masses was less than the Redfield ratio (16), indicating that nitrate did act as a limiting factor in phytoplankton growth. On the contrary, in August and October, the N/P ratio in surface and sub-surface layer was greater than the Redfield ratio, suggesting that phosphate was a limiting factor.

• Korean Journal of Metals and Materials
• /
• v.50 no.8
• /
• pp.613-618
• /
• 2012

We report on electrical and mechanical properties of silicon nitride ($SiN_x$) films deposited by a plasma enhanced chemical vapor deposition (PECVD) method at $200^{\circ}C$ from $SiH_4$ highly diluted in $N_2$. The films were also prepared from $SiH_4$ diluted in He for comparison. The $N_2$ dilution was also effective in improving adhesion of the $SiN_x$ films, fascilitating construction of thin film transistors (TFTs). Metal-insulator-semiconductor (MIS) and Metal-insulator-Metal (MIM) structures were used for capacitance-voltage (C-V) and current-voltage (I-V) measurements, respectively. The resistivity and breakdown field strength of the $SiN_x$ films from $N_2$-diluted $SiH_4$ were estimated to be $1{\times}10^{13}{\Omega}{\cdot}cm$, 7.4 MV/cm, respectively. The MIS device showed a hysteresis window and a flat band voltage shift of 3 V and 0.5 V, respectively. The TFTs fabricated by using these films showed a field-effect mobility of $0.16cm^2/Vs$, a threshold voltage of 3 V, a subthreshold slope of 1.2 V/dec, and an on/off ratio of > $10^6$.

• Nutrition Research and Practice
• /
• v.15 no.3
• /
• pp.367-381
• /
• 2021

BACKGROUND/OBJECTIVES: This study aimed to establish a mother and child cohort in the Chinese population, and investigate human breastmilk (HBM) composition and its relationship with maternal body mass index (BMI) and infant growth during the first 3 mon of life. SUBJECTS/METHODS: A total of 101 Chinese mother and infant pairs were included in this prospective cohort. Alterations in the milk macronutrients of Chinese mothers at 1 mon (T1), 2 mon (T2), and 3 mon (T3) lactation were analyzed. HBM fatty acid (FA) profiles were measured by gas chromatography (GC), and HBM proteomic profiling was achieved by matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry (MS). RESULTS: During the first 3 mon of lactation (P < 0.05), significant decreases were determined in the levels of total energy, fat, protein, and osteopontin (OPN), as well as ratios of long-chain saturated FA (including C16:0, C22:0 and C24:0), monounsaturated FA (including C16:1), and n-6 poly unsaturated FA (PUFA) (including C20:3n-6 and C20:4n-6, and n-6/n-3). Conversely, butyrate, C6:0 and n-3 PUFA C18:3n-3 (α-linolenic acid, ALA) were significantly increased during the first 3 mon (P < 0.05). HBM proteomic analyses distinguished compositional protein differences over time (P = 0.001). Personalized motherinfant analyses demonstrated that HBM from high BMI mothers presented increased total energy, fat, protein and OPN, and increased content of n-6 PUFA (including C18:3n-6, C20:3n-6 and n-6/n-3 ratio) as compared with low BMI mothers (P < 0.05). Furthermore, BMI of the mothers positively correlated with the head circumference (HC) of infants as well as the specific n-6 PUFA C20:3n-6 over the 3 time points examined. Infant HC was negatively associated with C18:0. CONCLUSION: This study provides additional evidence to the Chinese HBM database, and further knowledge of FA function. It also helps to establish future maternal strategies that support the healthy growth and development of Chinese infants.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.5
• /
• pp.257-261
• /
• 2006

Nano-structured carbon nitride $(CN_x)$ films were prepared by reactive RF magnetron sputtering with a DC bias at various deposition conditions, and the physical and electrical properties were investigated. FTIR spectrum indicated an ${alpha}C_3N_4$ peak in the films. The carbon nitride film deposited on Si substrate had a nano-structured surface morphology. The grain size was about 20 nm and the deposition rate was $1.7{\mu}m/hr$. When the $N_2/Ar$ ratio was 3/7, the level of nitrogen incorporation was 34.3 at%. The film had a low dielectric constant. The metal-insulator-semiconductor (MIS) capacitors that the carbon nitride was deposited as insulators, exhibited a typical C-V characteristics.

• Journal of the Korean Vacuum Society
• /
• v.5 no.3
• /
• pp.223-228
• /
• 1996

$SiO_2$ insulator layers on InSb have been prepared by remote PECVD system a low temperature below $200^{\circ}C$. The effects of deposition pressure, temperature, and gas flow ratio on the physical and electrical characteristics of the $SiO_2$ were studied. The InSb MIS device using $SiO_2$ was fabricated and measured its current-voltage and capacitance-voltage characteritance-voltage charateristics at 77K. The films evaluated Auger electron spectroscopy showed that composition atoms were distributed uniformaly throughout the oxide film and the outdiffusion of substrate atoms into the oxide were few. The leakage current density of the MIS device was about 6.26nA/$\textrm{cm}^2$ at 0.75MV/cm , and the breakdown voltage was about 1MV/cm. The interface-stage density at mid-bandgap extracted from 1MHz C-V measurement was $54\times 10^{11}\textrm{cm}^2-2V^{-1}$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.3
• /
• pp.157-160
• /
• 2002

The ferroelectric domain variation and electrical performance of $Pb(Zr,Ti)O_{3}$ (PZT) based capacitors through La additions were systematically studied. La substitution up to 10 % was performed to lower the coercive and saturation voltages of epitaxial ferroelectric capacitors grown on Si using a (Ti_{0.9}Al_{0.1})N/Pt$ conducting barrier composite. Ferroelectric capacitors substituted with 10 % La show significantly lower coercive voltage compared to capacitors with 0 % and 3 % La. This is attributed to a systematic microstructure change into $180^{\circ}C$ domain and decrease in the tetragonality (i.e., c/a ratio) of the ferroelectric phase. These capacitors show promise as storage elements in low power memory architectures.

• Corrosion Science and Technology
• /
• v.9 no.6
• /
• pp.247-253
• /
• 2010

The characteristics of selective oxidation prior to hot-dip galvanizing with the annealing atmosphere dew point and chemical composition in dual-phase steels and their effect on the inhibition layer formation relevant to coating adhesion have been studied using a combination of electron microscopic and surface analytical techniques. The annealed and also galvanized samples of 3 kinds of Si/Mn ratios with varied amounts of Si addition were prepared by galvanizing simulator. The dew point was controlled at soaking temperature $800^{\circ}C$ in 15%$H_2$ -85%$N_2$ atmosphere. It was shown that good adhesion factors were mainly uniformity of oxide particle distribution of low number density and low Si/Mn ratio prior to hot-dip galvanizing. Their effect was the greatly reduced coating bare spots and the formation of uniform inhibition layer leading to good adhesion of Zn overlay. The mechanism of good adhesion is suggested by two processes: the formation of inhibition layer on the oxide free surface uncovered with no $SiO_2$-containing particles in particular, and the inhibition layer bridging of oxide particles. The growth of inhibition layer was enhanced markedly by the delayed reaction of Fe and Al with the increase of Si/Mn ratio.

• Journal of Ecology and Environment
• /
• v.38 no.4
• /
• pp.517-528
• /
• 2015

Litter decomposition is an important process in terrestrial ecosystem. However, studies on decomposition are rare, especially in evergreen broadleaf trees. We collected the leaf litter of five evergreen broadleaf trees (Daphniphyllum macropodum, Dendropanax morbifera, Castanopsis cuspidata var. thunbergii, Machilus thunbergii and Quercus acuta), and carried out a decomposition experiment using the litterbag method in Ju-do, Wando-gun, Korea for 731 days from December 25, 2011 to December 25, 2013. Among the five experimental tree species, C. cuspidata var. thunbergii distribution was limited in Jeju Island, and D. macropodum was distributed at the highest latitude at Mt. Baekyang (N 35°40′). About 2% of the initial litter mass of D. macropodum and D. morbifera remained, while 20.9% remained for C. cuspidata var. thunbergii, 30.4% for M. thunbergii, and 31.6% for Q. acuta. D. macropodum litter decayed four times faster (k = 2.02 yr^-1) than the litter of Q. acuta (k = 0.58 yr^-1). The decomposition of litter was positively influenced by thermal climate such as accumulated mean daily air temperature (year day index) and precipitation, as well as by physical characteristics such as thickness (R²=0.939, P = 0.007) and specific leaf area (SLA) (R² = 0.964, P = 0.003). The characteristics of chemical composition such as lignin (R² = 0.939, P = 0.007) and water-soluble materials (R² = 0.898, P = 0.014) showed significant correlations with litter decomposition. However, the nutrients in litter showed complicated species-specific trends. The litter of D. macropodum and D. morbifera had fast decomposition despite their low nitrogen concentration and high C/N ratio. This means that the litter decomposition was more strongly affected by physical characteristics than chemical composition and nutrient content. On the other hand, the litter of Q. acuta which had the slowest decay rate had a high amount of N and low C/N ratio. Thus, the decomposition of Q. acuta litter was more affected by the P content of the litter than the N content, although all litter had similar physical characteristics.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.143-146
• /
• 1994

In older to investigate the properties of electric conduction in low density polyethylene(LDPE) for power cable, the thickness of specimen was the 30, 100($\mu\textrm{m}$) of LDPE. The experimental condition for conductive properties was measured until the breakdown occurs at temperature ranges from 30 to 110[$^{\circ}C$] and in the electric field of 1 to 5 ${\times}$10$^2$[Mv/m]. As for increase of temperature, the current density of LDPE was increased with constant ratio in low field, but changes with exponential function in high field. The tunnel current of pre-breakdown region is shifted toward low field as much as thermal excitation energy.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.396-399
• /
• 2009

Thin-film transistors (TFTs) with an aluminum indium oxide (AIO) channel layer were fabricated via a simple and low-cost sol-gel process. Effects of annealing temperature and time were investigated for better TFT performance. The sol-gel AIO TFTs were annealed as low as $350^{\circ}C$. They exhibit n-type semiconductor behavior, a mobility higher than 19 $cm^2/V{\cdot}s$ and an onto-off current ratio greater than $10^8$.