• Preventive Nutrition and Food Science
• /
• 제8권3호
• /
• pp.230-234
• /
• 2003

Mass transfer characteristics during osmotic dehydration of carrots were studied as functions of immersion temperature and time, and sugar and salt concentrations. The effect of osmotic dehydration on the degree of browning of air-dried carrots was also evaluated. Increasing the immersion temperature and time, sugar concentration, and salt addition increased water loss, sugar gain, molality and rate of dehydration. The water loss and increases in solids, and molality were rapid in the beginning of the process and then increased slowly during remainder of the process. Increasing 1 or 2% salt concentration in the 40$^{\circ}$Brix sugar solution at 6$0^{\circ}C$ increased water loss and solid gain. Salt addition was not able to significantly affected on water loss and solid gain compare to temperature (40～8$0^{\circ}C$) and sugar concentration (20～60$^{\circ}$Brix) changes due to the low salt concentration. A minimum degree of browning of the air-dried carrots (O.D. = 0.048) could be achieved using binary solutions (40$^{\circ}$Brix sugar solution with 2% salt addition) with 24 min of immersion time compared to control (O.D. = 1.308) or blanching with 24 min of immersion time (O.D. = 0.174).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.728-733
• /
• 2008

Though multi-panel structures lined with a poroelastic material have been widely used to reduce sound transmission in various fields, most of the previous works to design them were conducted by repeated analyses or experiments based on initially given configurations or sequences. Therefore, it was difficult to obtain the optimal sequence of multi-panel structures lined with a poroelastic material yielding superior sound isolation capability. In this work, we propose a new design method to sequence a multi-panel structure lined with a poroelastic material having maximized sound transmission loss. Being formulated as a one-dimensional topology optimization problem for a given target frequency, the optimal sequencing of panel-poroelastic layers is systematically carried out in an iterative manner. In this method, a panel layer is expressed as a limiting case of a poroelastic layer to facilitate the optimization process. This means that main material properties of a poroelastic material are treated as Interpolated functions of design variables. The designed sequences of panel-poroelastic layers were shown to be significantly affected by the target frequencies; more panel layers were used at higher target frequencies. The sound transmission loss of the system was calculated by the transfer matrix derived from Biot's theory.

• 한국정보전자통신기술학회논문지
• /
• 제1권1호
• /
• pp.35-39
• /
• 2008

본 논문에서는, 기하광학 기법을 적용하여 60GHz 대역의 밀리미터파 실내통신환경에서 전파손실 파라미터를 예측할 수 있는 GUI 기반의 프로그램을 개발하였다. 프로그램은 전기영상법과 광선 추적기법의 두 가지 모듈로 구성되어 있으며, 각각 UTD 이론이 적용되었다. 전기영상법을 사용한 일(一)자형 복도 구조와 광선 추적기법을 적용한 T자형 복도 구조에 대한 결과를 제시하였다. 시물레이션 결과 데이터는 기존 논문에서 발표된 측정 데이터와 비교 검증하였으며, 전파손실에 대한 비교결과가 매우 잘 일치 하였다.

• 대한원격탐사학회지
• /
• 제36권5_2호
• /
• pp.929-937
• /
• 2020

본 논문에서는 의미론적 분할을 위한 딥러닝 기술 중의 하나인 UNet++ 모델을 이용하여 다시기 위성영상의 변화지역을 탐지하고자 하였다. 다양한 손실함수에 대한 학습결과를 분석하기 위하여, 이진 교차 엔트로피, 자카드 변수에 의하여 학습된 UNet++ 모델에 의한 변화탐지 결과를 평가하였다. 또한, 딥러닝 모델의 결과는 WorldView-3 위성영상을 활용하여 기존의 화소기반 변화탐지 기법의 결과와 비교하여 평가하였다. 실험결과, 손실함수의 특성에 따라서 딥러닝 모델의 성능이 달라질 수 있음을 확인하였으나, 기존 기법들과 비교하여 우수한 결과를 나타내는 것도 확인하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제18권5호
• /
• pp.279-286
• /
• 2017

In this paper, an optimal approach for the wide-area regulation of control devices in a transmission network is proposed. In order to realize an improved voltage profile and reduced power loss, existing devices such as tap-changing transformers, synchronous machines, and capacitor banks should be controlled in a coordinated and on-line manner. It is well-understood that phasor measurement units in transmission substations allow the system operators to access the on-line loading and operation status of the network. Accordingly, this study proposes efficient software applications that can be employed in area operation centers. Thus, the implanted control devices can be regulated in an on-line and wide-area coordinated approach. In this process, efficient objective functions are devised for both voltage profile improvement and power loss reduction. Subsequently, sensitivity analysis is carried out to determine the best weighting factors for these objectives. Extensive numerical studies are conducted on an IEEE 14-bus test system and a real-world system named the Azarbayjan Regional Transmission Network. The obtained results are discussed in detail to highlight the promising improvements.

• 동아시아식생활학회지
• /
• 제18권6호
• /
• pp.1089-1098
• /
• 2008

The principal objective of this study was to reveal the relationship between the menu management indicators and menu performance indicators in contract-foodservice operations. Menu indicators differed according to the type of business, type of contract, type of serving, and number of service lines. In accordance with the results of our correlation analysis, we noted significant correlations between menu performance indicators and menu management indicators. The first of these was the correlation between the food cost ration and meal counts, food loss, and the use of prepared vegetables. The second of these was the correlation between food cost per meal and forecasting error, food loss, and inventory turnover. The last of these correlations was the negative correlation between menu CSI(customer satisfaction index) and the use of prepared vegetables. According to the results of our canonical correlation analysis, 2 significant functions were identified. In the first function, we noted significant correlations between meal counts, use of prepared vegetables, food loss, and food cost ratio. Additionally, we noted significant correlations between forecasting error, inventory turnover, food loss, and food cost per meal in the second function. Menu management indicators had no influence on customer satisfaction.

• 한국안전학회지
• /
• 제31권3호
• /
• pp.34-41
• /
• 2016

The purpose of this paper is to conduct ETA on six items of ESS: the whole system, battery, BMS, PCS, ESS and cable. To achieve that, ESS work flow and its components are categorized. Based on performance, human, environmental, management, and safety, this paper drew initiation events (IE) and end states (ES). ETA is applied to the main functions of each item, and the end states that may occur in one initiation event are suggested. In addition, detailed classification was performed to induce various end states on the basis of the suggested initiation events ; loss of grid electricity of ESS, loss of battery electricity(DC) of battery, impairment of electric function of BMS, loss of grid electricity(AC) of PCS, loss of data of EMS, Mechanical damage of cable, event sequence analysis conducted on the basis of event trees. If the suggested IEs and ESs are applied on the basis of ESS event cases, it is expected to prevent the same kinds of accident and operate ESS safely.

• 한국소음진동공학회논문집
• /
• 제18권12호
• /
• pp.1262-1269
• /
• 2008

Though multilayered foam-panel structures have been widely used to reduce sound transmission in various fields, most of the previous works to design them were conducted by repeated analyses or experiments based on initially given configurations or sequences. Therefore, it was difficult to obtain an optimal sequence of multilayered foam-panel structure yielding superior sound isolation capability. In this work, we propose a new design method to sequence a multi-panel structure lined with a poroelastic material having maximized sound transmission loss. Being formulated as a one-dimensional topology optimization problem fur a given target frequency, the optimal sequencing of panel-poroelastic layers is systematically carried out in an iterative manner. In this method, a panel layer is expressed as a limiting case of a poroelastic layer to facilitate the optimization process. This means that main material properties of a poroelastic material are treated as interpolated functions of design variable. The designed sequences of panel-poroelastic multilayer were shown to be significantly affected by the target frequencies; more panels were obtained at higher target frequency. The sound transmission loss of the system was calculated by the transfer matrix derived from Biot's theory.

• 한국지진공학회논문집
• /
• 제27권6호
• /
• pp.311-320
• /
• 2023

When an earthquake occurs, the severity of damage is determined by natural factors such as the magnitude of the earthquake, the epicenter distance, soil properties, and type of the structures in the affected area, as well as the socio-economic factors such as the population, disaster prevention measures, and economic power of the community. This study evaluated the direct economic loss due to building damage and the community's recovery ability. Building damage was estimated using fragility functions due to the design earthquake by the seismic design code. The usage of the building was determined from the information in the building registrar. Direct economic loss was evaluated using the standard unit price and estimated building damage. The standard unit price was obtained from the Korean Real Estate Board. The community's recovery capacity was calculated using nine indicators selected from regional statistical data. After appropriate normalization and factor analysis, the recovery ability score was calculated through relative evaluation with neighboring cities.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.2037-2047
• /
• 1991

본 연구에서는 재료 결정격자의 기본단위나 결정립의 형상등 가장 기본적인 형태가 6각형이라는 점에 착안하여 취성재료의 파손모델로 부재들의 결손을 이용하는 결손확률모델을 제안하여 부재결손에 따른 각각의 파손 해석모델과 결손확률을 구한다. 그리고 비결손모델에서 구한 기본인장하중을 기초로 하여 해석하고자 하는 하중하에서 각각의 파손해석모델을 모델링하여 유한요소법으로 부재결손에 따른 요소중심에서의 최대주응력을 구하여 이론극한인장강도와의 비와 결손확률로 취성재료의 파손확률을 구한다. 또한 취성정도에 따른 균열길이에 대한 치수 매개변수를 구함으로써 재료강 도 연구에 기초가 되게 한다.