• 한국CDE학회논문집
• /
• 제2권3호
• /
• pp.133-141
• /
• 1997

In the process of car body design, various surfaces are generated from the given boundary curves. Depending upon the method of the surface generation and the quality of the boundary curves provided, the resulting surfaces may have global or local irregularities in many cases. Thus it would be necessary for the designer to evaluate the surface quality and to modify the surface or to use the different generation method based on the evaluation results. This capability is very important because the defect of the surface quality detected in the production stage will require the rework of the dies and will cause a big loss in cost and time. A method of surface interrogation using reflection line is introduced. In this paper, We applied reflection mapping to generate reflection lines on the trimmed NURBS surface. Since reflection lines are obtained from reflection mapping that uses simple and physically acceptable mapping algorithm, they can be efficiently used to simulate the reflection test on the real part in the production line.

• 한국초전도ㆍ저온공학회논문지
• /
• 제1권2호
• /
• pp.30-36
• /
• 1999

Superconductors are dissipative when exposed to time-varying magnetic fields. To analyze the AC characteristics of a superconductor, one usually needs to know magnetization curves of it. Good magnetization curves can be obtained only in homogeneous magnetic filed. In This paper, we report the setup and test results of a magnetization measurement system, which consists mainly of frequency-variable power supply and homeogenous magnet with 7-cm long air gap. Special emphasis are foused on the design and fabrication of the magnet, which aims to give background magnetic fields, and on the overall characteristics of the system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.323-326
• /
• 1999

This paper describes a point matching method that is based on an expansion of the electromagnetic field in terms of a series of Bessel and modified Bessel functions multiplied by trigonometric functions. In this method, the electric and magnetic fields inside the waveguide core are matched to those outside the core at matching points on the boundary to yield matrix equations. As an example applying this method, the paper presents the results of the computation in the form of curves of the propagation constants in a semicircular optical waveguide, be formed by annealing for reduced insertion(radiation) loss when connected to optical fiber. The propagation curves are presented in a form of refractive index independent. Also, it presents relative energy distributions between inside the core and outside the core of various modes and presents field distributions.

• 한국안전학회지
• /
• 제16권4호
• /
• pp.29-38
• /
• 2001

The purpose of this paper is to evaluate the structural integrity of a reactor pressure vessel subjected to the pressurized thermal shock(PTS) during the transient events, such as main steam line break(MSLB) and small break loss of coolant accident(SBLOCA). For postulated surface or subsurface cracks, variation curves of stress intensity factor are obtained by using the three different methods, including ASME section XI code anlysis, the finite element alternating method and the finite element method. From the stress intensity factor curves, the maximum allowable nil-ductility transition temperatures(RT/NDT/) are determined by the tangent criterion and the maximum criterion for various crack configurations and two initial transient events. As a result of the analysis, it is noted that axial cracks have smaller maximum allowable RT$_{NDT}$ values than same-sized circumferential cracks for both the transient events in the case of the tangent criterion. Axial cracks have smaller RT$_{NDT}$ values than same-sized circumferential cracks for MSLB and circumferential cracks have smaller values than axial cracks for SBLOCA in the case of the maximum criterion.

• 지구물리
• /
• 제6권4호
• /
• pp.245-259
• /
• 2003

Two multichannel analysis of surface wave (MASW) surveys were conducted over a soil site in Tacoma Water's Green River Facility, Washington, where construction of a chemical treatment facility had been planned. The purpose of the surveys was to compare soil stiffness characterized by shear-velocity (Vs) distribution before and after Deep Dynamic Compaction (DDC) operation that was designed to improve the soil stiffness. Site soil consisted of very heterogeneous gravel and cobbles in a sand-and-silt matrix. Results from each survey are represented by two 2-D Vs maps delineating Vs variation of soil below the surveyed lines. One map was constructed from those dispersion curves that were analyzed with a significant amount of subjective judgment involved, whereas the other map was constructed from those dispersion curves analyzed with as much objective information as possible. Comparison of 2-D Vs maps indicates that Vs actually decreased after the DDC operations, possibly due to the loss (or reduction) of cohesive bonding between soil particles caused by the compaction operations.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.493-495
• /
• 2006

The hysteresis characteristics of flux-lock reactor, which is an essential component of flux-lock type superconducting fault current limiter (SFCL), was investigated. The hysteresis loss of iron core in flux-lock type SFCL does not happen due to its winding's structure especially in the normal state. From the equivalent circuit for the flux-lock type SFCL and the fault current limiting experiments, the hysteresis curves could be drawn. Through the hysteresis curves together with the fault current level due to the inductance ratio for the 1st and 2nd windings, the increase of the number of turns in the 2nd winding of the flux-lock type SFCL had a role to prevent the iron core from saturation.

• 한국자기학회지
• /
• 제22권1호
• /
• pp.23-26
• /
• 2012

정현파 자속밀도 조건에서 연자성 재료의 교류자기손실을 측정하기 위한 새로운 방법을 제시하였다. 본 방법은 입력전압파형을 결정짓기 위해 통상 이용하는 $H_i(B_i)$곡선대신 $V_{in}$(B)곡선을 이용함으로서 자기장, 자속밀도 그리고 입력전압간의 위상차를 고려할 필요가 없이 직접 입력전압파형을 얻을 수 있어 프로그램이 간편하게 되는 장점을 가지고 있었다. 개발된 측정방법의 유효성을 1 kHz, 10 kHz 주파수에서 페라이트 코어로 확인할 수 있었다.

• 한국터널지하공간학회 논문집
• /
• 제18권1호
• /
• pp.61-74
• /
• 2016

본 논문에서는 화강풍화대를 통과하는 슬러리 TBM 굴진 중 지표 침하 및 체적손실 산정에 관한 사례 연구를 수행하였다. 터널 천단 침하 계측 결과로부터 TBM 굴진 단계별 침하 발생 경향을 분석하였고, 횡방향 지표 침하 트라프로부터 굴진 중 체적손실 및 트라프 변수를 산정하였다. 또한, 체적손실 산정 모델을 이용하여 지반 특성과 굴진 중 측정된 기계데이터가 반영된 굴진 단계별 체적손실을 산정하였으며, 이를 실제 계측 결과와 비교 분석하였다. 슬러리 TBM의 경우 대부분의 지표침하는 쉴드 본체 통과 및 뒤채움 주입 이후 발생하는 것으로 나타났고 문헌에 보고된 총 체적손실 및 트라프 곡선 형태가 확인되었다. 실제 굴진 중 체적손실은 굴진 단계별로 쉴드손실 예측값의 90%, 테일부 손실 예측값의 60% 수준으로 분석되었고, 쉴드 손실에 비해 테일부 손실의 편차가 큰 것으로 나타났다.

• 조명전기설비학회논문지
• /
• 제21권10호
• /
• pp.66-72
• /
• 2007

이 논문은 직류+60[Hz] 교류 중첩전압에서 신품과 노후된 18[kV] 산화아연 서지피뢰기의 누설전류와 전력손실에 대하여 기술하였다. 최대 50[kV]의 직류+60[Hz] 교류를 발생시킬 수 있는 중첩전압발생장치가 설계되고 제작되었다. 피뢰기의 I-V 특성곡선은 전압중첩률 K의 함수로 측정된다. DC와 AC 전압이 중첩된 I-V, R-V 특성곡선은 순수한 직류와 교류곡선 사이에 있고 저전류 영역에서 교차현상이 나타난다. 그 결과 중첩 전압에서 직류 성분의 증가는 ZnO 피뢰기의 전체 누설전류의 저항성분의 증가를 유발한다. 또한 같은 인가전압에서 피뢰기를 통해 흐르는 누설전류는 상용전원에서 장시간 스트레스 받은 피뢰기가 신품 피뢰기에 비해서 높게 나타났다.

• Advances in Energy Research
• /
• 제1권1호
• /
• pp.35-52
• /
• 2013

A model for DMFC anode performance is developed. The model takes into account potential--independent methanol adsorption on the catalyst surface, finite rate of proton transport through the anode catalyst layer (ACL), and a potential loss due to methanol transport in the anode backing layer. An approximate analytical half--cell polarization curve is derived and equations for the anode limiting current density are obtained. The polarization curve is fitted to the curves measured by Nordlund and Lindbergh and parameters resulted from the fitting are discussed.