• 대한치과교정학회지
• /
• 제25권3호
• /
• pp.263-271
• /
• 1995

Canine retraction spring과 같은 looped wire에서, 각 변환요소에 따라 변하는 탄성 정도를 알아보기 위하여, wire의 재료, 굵기, loop에 소요된 길이, loop의 모양, gabling의 여부 등 5가지의 변환요소를 설정하여, 각 wire activation시의 탄성을 range, force, stiffness등의 면에서 알아보고자 하였다. wire의 재료적인 면에서 Hi-T (Unitek Co.)와 blue Elgiloy (Rocky Mountain Orthodontics)를 선택하였으며, 굵기로는 .016"$\;\times\;$.022" 와 .018"$\;\times\;$.025"를 선택하였다. loop 자체에 소요된 wire 길이를 15mm와 20mm의 두가지로, loop의 모양을 vertical open loop과 vertical closed loop의 두가지로, gabling의 양을 $0\circ$와 $30\circ$의 두가지로 하여 각각 제작하였다. 따라서 wire의 재료와 굵기, loop의 길이와 모양, gabling의 5가지 변환요소에 따라 32개군으로 구분되었으며, 각 군의 시료수는 8개씩으로, 총 256개의 시료를 대상으로 하였다. Instron(4202, Instron Co, USA)을 사용하여 각 시료의 하중변형 곡선을 얻었으며 elastic limit에서의 하중과 변형을 계측하고, 그때의 stiffness(force/range)를 산출하여, ANOVA 등의 통계처리로 32개군 간의 상관성을 조사하였다. 그 결과 wire의 재료, 굵기, loop의 길이, 모양, gabling모두가 looped wire의 하중 변형도에 유의한 영향을 미치는 것을 관찰할 수 있었으며, 탄성범위에서의 force는 Hi-T, .016"$\;\times\;$.022", loop 길이 20mm, open loop, non-gable군에서 가장 적었으며, blue Elgiloy, .018"$\;\times\;$.025", loop 길이 15mm, closed loop, non-gable군에서 가장 컸다. 탄성범위에서의 range는 Hi-T, .018"$\;\times\;$.025", loop길이 15mm, open loop, non-gable군이 가장 적었으며, Hi-T, .016"$\;\times\;$.022", loop길이 20mm, closed loop, gable군에서 가장 컸다. 또한 Looped wire의 탄성에 가장 큰 영향을 미치는 변환요소는 loop의 모양과 길이였으며, gabling의 영향이 가장 적었다.

• Imaging Science in Dentistry
• /
• 제46권2호
• /
• pp.69-75
• /
• 2016

Purpose: Sufficient area in the interforaminal region is required for dental implant placement, and the anterior loop of the mandibular canal is located within the limits of this area. The aim of this study was to evaluate the prevalence and extent of the anterior loop in a Brazilian sample population using cone-beam computed tomography (CBCT). Materials and Methods: CBCT images from 250 patients (500 hemimandibles) obtained for various clinical indications were randomly selected and evaluated to determine the presence and length of the anterior loop. The length of the anterior loop was then compared based on gender, age, and the side of the mandible. The data were analyzed using the Pearson chi-square test and linear regression analysis. Results: An anterior loop was identified in 41.6% of the cases, and its length ranged from 0.25 mm to 4.00 mm (mean, $1.1{\pm}0.8mm$). The loop had a greater mean length and was significantly more prevalent in males (p=0.014). No significant differences were found between the right and left sides regarding length (p=0.696) or prevalence (p=0.650). Conclusion: In this study, a high prevalence of the anterior loop of the mandibular canal was found, and although its length varied greatly, in most cases it was less than 1 mm long. Although this is a prevalent anatomical variation, safety limits for the placement of implants in this region cannot be established before an accurate evaluation using imaging techniques in order to identify and preserve the neurovascular bundles.

• 한국의류학회지
• /
• 제29권8호
• /
• pp.1158-1167
• /
• 2005

The purpose of this study is to examine the effect of structural properties of plain knit fabrics on the subjective textures and sensibilities of consumers. We investigated the relationship of subjective textures and sensibilities according to fiber contents of wool/rayon and stitch loop length. We made 20 plain knit fabrics, as specimens, with a combination of 5 kinds of fiber contents and 4 kinds of stitch loop length. A factor analysis showed that subjective textures are classified into 3 categories with $R^2=70.32\%$: 'surface-rough', 'drapable', 'bulky' and 'elastic' and subjective sensibilities into 3 categories with $R^2=68.12\%$: 'stable/neat', 'feminine/elegant' and 'natural/comfortable'. The fiber contents of wool/rayon had a positive and linear relation with 'surface-rough', but had a relatively non-linear one with 'bulky' and 'elastic' categories of textures, and 'feminine/elegant' of sensibilities. The stitch loop length had a linear influence on 'drapable' and 'stable/neat', but had a non-linear influence on other subjective textures and sensibilities.

• 한국염색가공학회지
• /
• 제11권6호
• /
• pp.51-58
• /
• 1999

The dimensional properties on polyester warp knitted fabrics with various lengths of underlap were studied. The results indicated that loop density increased with decreasing loop length and loop density of satin warp knitted fabric are a little higher than that of reverse satin warp knitted fabrics at a constant loop length. As the distance of underlap becomes shorter, the weight per unit area and thickness increases, the bulkiness decreases and the shrinkage of knitted fabrics become larger toward wale in satin warp knitted fabric and toward the course in reverse satin warp knitted fabric.

• 한국멀티미디어학회논문지
• /
• 제12권7호
• /
• pp.971-978
• /
• 2009

본 연구는 위상제어형 루프안테나에 관한 것으로서, 유전체기판 상에 에칭기법이나 프린트기법으로 루프안테나용 동박패턴을 제작함에 있어, 루프에서 발생하는 전자계가 서로 보완위상이 되게 배치하여, 인접하는 루프패턴 간에서 방사되는 전자계가 서로 충돌하지 않게 방사되는 위상제어형 루프코일 배치에 관한 것이다. 이 방법으로 인접하는 각 루프코일이 서로 보완위상으로 배치되어 전자계가 원만하게 방사되어, 방사 손실이 없고 방사 효율이 뛰어나게 된다. 또한 복수 개의 각 루프코일의 길이를 서로 달리함으로 인해, 각 루프코일의 길이가 달라짐에 따라 공진주파수가 달라지고, 이러한 공진점이 다른 루프코일을 밀결합 시킴으로 인해 공진주파수 대역을 넓게 할 수 있고, 원하는 대역만큼 조절할 수가 있게 된다. 이로 인하여 크기 20mm$\times$20mm 이하의 사이즈에, 두께 0.4mm 이하의 박막의 유전체기판에 CDMA850 휴대폰대역 및 PCS, WCDMA 등의 안테나를 구현하여 게인 0dBi 이상 방사효율 60% 이상의 안테나를 구현할 수가 있다.

• 대한교통학회지
• /
• 제13권3호
• /
• pp.67-86
• /
• 1995

It requires the detector system which can collect highly reliable traffic data in order to perform the real-time traffic signal control. This study is to decide the optimal shape of inductive loop for the real-time traffic signal control .This loop is located at the stopline in the signalized intersection for DS(Degree of Saturation) control. In order to find out the optimal shape of loop, 6types of experiments were performed . The results of the basic experiments of loops are as follows ; -the optimal number of turns for loop is 3 turns. -the impedance values of the loop detectors are similar to that of NEMA standards -the 1.8${\times}$4.5M loop is excellent for sensitivity in actual detection range of car length comparing to other shape of inductive loops. At the experimental of establishments of the optimal loop shape, it found that 1.8 4.5M loop has the highest values of $\DeltaL$ comparing to other types of loops, It means that the range of Lead-in cable length of this loop. And this loop is highly reliable in occpupancy time. Conclusivley, the 1.8${\times}$4.5M inductive loop is the optimal solution as a stop line loop detector for real -time traffic signal control.

• Journal of the Optical Society of Korea
• /
• 제20권2호
• /
• pp.300-304
• /
• 2016

A dual loop optoelectronic oscillator (OEO) based on an acousto-optic modulator (AOM) for single mode operation with an acousto-optic delay line is demonstrated in this paper. When the OEO operates, the free spectral range is a function of the total loop length of the OEO, which is mainly dependent on the propagation time of the acoustic wave in the AOM. Due to the huge difference in the magnitude between the speed of light and the acoustic velocity in the AOM, the effective loop length converted to light-propagation length of the OEO increases to 3.8 km. With 150 MHz oscillation frequency, phase noise of -118 dBc/Hz at 10 kHz frequency offset, and -140 dBc/Hz at 200 kHz frequency offset, is achieved.

• 한국의류학회지
• /
• 제31권7호
• /
• pp.1128-1138
• /
• 2007

The purpose of this study is to develop the relationship model among subjective texture and preference of weft knit according to fiber contents of wool/rayon and loop length by integrating previous research work. SPSS and SEM method using AMOS program were used to analyze data which used to correlation matrix to be standardized. The texture of weft knit were classified into 4 categories: irregularity, flexibility, bulkiness, extensibility. The fiber contents of wool/rayon had effect positively on irregularity, bulkiness and extensibility and that had little effect on preference. The loop length had effect positively on irregularity, flexibility and extensibility and that had effect negatively on preference. This measurement model will be input for testing causal research model that can explain how fiber contents of wool/rayon and loop length of weft knit influence on subjective texture.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.58-63
• /
• 2009

A ground-loop heat exchanger for the ground source heat pump system is the core equipment determining the thermal performance and initial cost of the system. The size and performance of the heat exchanger is highly dependent on the ground thermal properties - the ground effective thermal conductivity, the borehole thermal resistance and the undisturbed ground temperature. Nowadays, precast concrete piles using steel reinforced precast concrete piles - energy piles - are used to reduce the installing cost of the ground-loop heat exchanger. We were carried out some tests to investigate the effects of some parameters such as borehole length, grouting materials and U-tube configuration of the energy piles. 4 concrete piles, each measuring $250mm{\sim}400mm$ in diameter and approx. 10m in length, and rigged with single spiral and 3 U-tube loop of $16mm{\times}2.3mm$ PB piping. The thermal response tests were conducted using a testing device for 4-different ground-loop heat exchangers. During the heating period, the energy piles absorb the heat of 0.89kW to 1.37kW.

• 한국산업융합학회 논문집
• /
• 제15권3호
• /
• pp.79-82
• /
• 2012

Aim of this study is to investigate the dimensional characteristics of the weft knitted fabrics with Bamboo knitted yarn. This Bamboo knitted yarn was made of the biodegradability fiber. The structure of weft knitted fabrics that was utilized for this study is the plain stitch, which is the most basic structure among all weft knitted fabrics. The loop density, courses density, and wales density are more increased as the loop length is shorter. The loop density increased as pre-treatment process and dyeing process progressed after dry treatment process, and on the contrary, the heat setting process made it decreasing. After the dyeing process proceed, the loop density and the course density were displayed the highest values. When the knitted fabrics were fully relaxed, the loop density was $2000/in^2$, the courses density was 52/in, the wales density was 39/in.