• 제목/요약/키워드: loop Antenna

검색결과 249건 처리시간 0.024초

Small Loop Antenna for EMI Controlled and Monitoring

  • Khemchan, A.;Khamphakdi, P.;Urabe, Junichiro;Khan-ngern, W.
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.470-473
    • /
    • 2004
  • This paper presents conducted emission noise measurement from electronic equipment in frequency range of 1 MHz up to 30 MHz by small loop antenna. Small loop antenna measurement method can measure common-mode (CM) and differential-mode (DM) component of the noise on a pair of power line at the same time. The CM and DM can be measured separately. The theory of this measurement method is introduced and analyzed. The measured results were compared with the conventional measurement by Line Impedance Stabilization Network (LISN) and result a good trend between those methods.

  • PDF

이중 오프셋 급전을 이용한 광대역 슬롯 루프 안테나의 설계 (Design of wide-band slot loop antenna by using dual offset-fed)

  • 조영빈;나종덕;전계석
    • 한국통신학회논문지
    • /
    • 제28권11A호
    • /
    • pp.912-920
    • /
    • 2003
  • 본 논문에서는 UWB용 소형 안테나를 설계하기 위해 폭이 넓은 안테나의 슬롯면내에 구형 루프를 추가하고 이중급전 방법을 사용한 슬롯루프 안테나를 제안하였다. 이 안테나는 3개의 기하학적인 공진 구조에 의해 다중 공진 모드를 발생시키는 새로운 구조이며, 각각의 공진 주파수에 따른 임피던스 정합은 이중 급진점의 오프셋 길이를 변화하여 얻을 수 있다. 제작된 안테나는 중심 주파수가 6.755 ㎓이며, 슬롯의 크기는 12.5mm${\times}$50mm이고 슬롯 내의 구형 루프의 크기는 10.5mm${\times}$27.5mm이다. 실험 결과 슬롯루프 안테나의 비대역폭은 VSWR 2:1 기준으로 63.21 %로 측정되었으며 이는 이론 값과 5% 범위 이내에서 일치하였다. 또한 안테나의 최대 이득은 7.42 ㏈i로 측정되었다.

Design and Implementation of Internal Multiband Loop Embedded Monopole Antenna for Mobile Handset

  • Jung, Pil Hyun;Yang, Cheol Yong;Lee, Seong Ha;Yang, Woon Geun
    • 전기전자학회논문지
    • /
    • 제17권4호
    • /
    • pp.484-491
    • /
    • 2013
  • In this paper, we proposed an internal multiband loop embedded monopole antenna for mobile handset that could be used for smart phones. The proposed antenna has a volume of 40 mm(W) ${\times}$ 15 mm(L) ${\times}$ 5 mm(H), ground plane size is 40 mm(W) ${\times}$ 80 mm(L), and covers the GSM900 (Global System for Mobile communications : 880-960 MHz), K-PCS (Korea-Personal Communications Service : 1750-1870 MHz), US-PCS (US Personal Communications Service : 1850-1990 MHz), WCDMA (Wideband Code Division Multiple Access : 1920-2170 MHz), Wibro (2300-2390 MHz), Bluetooth (2400-2483 MHz) and WLAN (Wireless Local Area Network : 2400-2483.5 MHz) bands for VSWR (voltage standing wave ration) less than 3. The proposed loop adding design at middle section of longest branch showed wide impedance bandwidth for the lowest resonance frequency band. The proposed antenna have a lowest resonance frequency band from 738 MHz to 1075 MHz for S11 value of -6dB. A HFSS (High Frequency Structure Simulator) of the Ansys Corporation based on a finite element method is employed to analyze the proposed antenna in the design process and to compare the simulation and experimental results.

기생 루프 구조를 이용한 휴대 단말기용 다중 대역 초소형 루프 안테나에 관한 연구 (A Study on the Small Loop Antenna with a Parasitic Loop Structure for Multiband Mobile Phone Application)

  • 이상흔;김기준;정종호;윤영중;김병남
    • 한국전자파학회논문지
    • /
    • 제21권6호
    • /
    • pp.706-713
    • /
    • 2010
  • 본 논문에서는 기생 루프 구조를 이용한 휴대 단말기용 5중 대역 초소형 루프 안테나를 제안한다. 제안된 안테나는 급전 모노폴, 기생 루프 구조를 가진 방사 루프 안테나, 추가 방사 소자로 구성되며, 매우 얇은 연성기판으로 제작된 안테나는 40 mm$\times$11 mm$\times$3 mm 크기의 유전체 캐리어에 장착된다. 제안된 안테나의 대역폭은 저대역에서 402 MHz(773~1,175 MHz)이고, 고대역에서 583 MHz(1,622~2,205 MHz)이다. 그 결과, 제안된 안테나는 VSWR 3:1 기준으로 GSM850, GSM900, DCS1800, PCS1,900, WCDMA 대역을 모두 만족함을 확인할 수 있었고, 방사 패턴, 이득, 효율 측면에서 휴대용 단말기에 적용되기에 적합한 성능을 얻었다. 따라서 제안된 안테나는 초소형 다중 대역 휴대 단말기의 응용 분야에 적합할 것으로 판단된다.

통방융합용 소형 모바일 안테나 및 근거리장 특성 (Compact mobile antenna and near field characterization for Communication Broadcasting Convergence)

  • 강정진
    • 한국인터넷방송통신학회논문지
    • /
    • 제8권5호
    • /
    • pp.43-49
    • /
    • 2008
  • 통방융합서비스가 가시화되면서 성능이 더욱 우수한 안테나 모델을 개발하기 위해 다양한 기술적 접근이 시도되고 있다. 본 논문은 핸드폰에 부착할 수 있고, 통방융합용에 적용할 수 있는 소형모바일 안테나를 제안한다. 모바일 핸드셑용 안테나 설계에서, 크기축소는 중요한 요소 중의 하나이며, 루프안테나의 소형화는 접어진 다이폴을 굽힘으로서 실현된다. 짧은 평면 다이폴은 더 큰 입력저항을 만들기 위해 두 배의 접어진 다이폴과 루프안테나로 변환된다. 그 안테나의 전류분포는 루프 안테나와 같고, 방사패턴은 전방향 특성을 갖는다. 또한 전기광학효과 맵핑 시스템을 이용하여 전류유기 근거리장 방사패턴에 의해 RFID안테나의 성능을 분석한다.

  • PDF

용량을 장하한 미소 루프 마이크로스트립 안테나 설계 (Design of a Small Loop Microstrip Antenna to load Capacitors)

  • 박성일;고영혁
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2006년도 춘계종합학술대회
    • /
    • pp.637-640
    • /
    • 2006
  • 본 논문에서는 용량을 장하하기 위해 좌 우측 평행 평판을 구성한 미소 루프 마이크로스트립 안테나를 제안했다. 제안된 안테나는 변형된 마이크로스트립 안테나와 용량을 장하한 QMSA (Quarter-Wavelength Microstrip Antenna) 안테나보다 훨씬 더 소형화할 수 있었다. 전송 선로 모델의 안테나 등가회로는 정확한 공진주파수를 찾기 위해 설계되었다. 또한, 설계 제작된 안테나는 동작주파수가 1.5GHz에서 수직 수평 편파를 수신할 수 있다. 그러므로 이 안테나는 무선 통신을 위한 소형화된 안테나로 이용할 수 있고 실내 통신을 위해 아주 양호하다.

  • PDF

휴대용 스마트 단말기 안테나 타입에 따른 디지털 노이즈와 안테나의 결합 분석 (Analysis of Coupling Between Digital Noise and Portable Smart Terminal Antenna According to Antenna Types)

  • 김준철
    • 전기전자학회논문지
    • /
    • 제23권3호
    • /
    • pp.873-877
    • /
    • 2019
  • 본 논문에서는 휴대단말기 안테나의 대표적 형태인 역 F 안테나(Inverted F Antenna, IFA)와 루프(Loop) 안테나에 따른 디지털 노이즈의 결합(coupling) 정도를 특성모드(characteristic mode)를 사용하여 분석한다. 우선, 안테나를 포함한 인쇄회로기판(Printed Circuit Board, PCB)의 특성모드 전류와 디지털 신호라인의 방향에 따른 결합 정도를 비교 분석하고, 이를 토대로 휴대단말기의 WiFi 안테나와 전방 카메라(front camera)의 결합에 대해서 분석한다. 분석을 위해서 카메라 모듈의 FPCB의 디지털 신호선과 그라운드 선을 PCB 그라운드의 특성 모드를 여기(excitation) 시키는 루프형 피더(feeder)로 모델링 했고, 안테나 타입(type)에 따른 노이즈 결합 변화에 대해서 분석을 했다.

유전 알고리즘을 이용한 인덕터 장하 소형 루프 안테나 설계 (Design of Two-Inductor Loaded Small Loop Antennas Using Genetic Algorithm)

  • 조규영;김재희;박위상
    • 한국전자파학회논문지
    • /
    • 제20권10호
    • /
    • pp.1021-1030
    • /
    • 2009
  • 단순 유전 알고리즘을 사용하여 두 개의 인덕터를 가지는 소형 루프 안테나를 최적화하는 방법을 제안한다. 루프내의 인덕터의 위치와 값을 유전 알고리즘을 사용하여 조절하며, RFID 대역과 휴대단말기 이중 대역에서 안테나를 최적화한다. 최적화를 위하여 비주얼 베이직을 사용하여 유전 알고리즘을 구현하였으며, 또한 이를 이용하여 전자기 시뮬레이터를 제어하여 유전자를 평가하였다. 최적화된 RFID 안테나는 중심 주파수 922 MHz에서 10 MHz의 -10 dB 대역폭을 가져 RFID 대역을 만족하며, 휴대단말기용 이중 대역 안테나는 중심 주파수 948 MHz와 1.81 GHz에서 대역폭을 각각 84 MHz와 266 MHz를 가져 GSM과 DCS 대역을 만족한다.

A Study on the Design of a Planar Loop Sensor for Partial Discharge Diagnosis of 22.9 kV XLPE Power Cables

  • Lim, Kwang-Jin;Yang, Sang-Hyun;Shin, Dong-Hoon;Park, Noh-Joon;Park, Dae-Hee
    • Journal of Electrical Engineering and Technology
    • /
    • 제3권4호
    • /
    • pp.559-565
    • /
    • 2008
  • This study designed a new type of loop antenna that is able to detect partial discharges based on microstrip line technology. In the diagnosis of power cables, partial discharge signals are generally produced at a frequency range less than 100MHz because high frequency PD signals are lost along a propagation path in such cables. The new type of loop antenna sensor has been studied using simulation software known as CST microwave studio version 5.0. In partial discharge measurement experiments, a commercial HFCT sensor was used as a reference sensor. Several experiments were made over HFCT and loop antenna sensors for detecting partial discharges on 22.9kV MV XLPE cable. In this study, we showed the loop antenna designed in this study that can be applied as a commercial HFCT sensor.

Design of the Crab label tag with a loop matching feed and a modified dipole structure at 900 MHz

  • Choi, Eui-Sun;Lee, Hak-Yong;Lee, Jin-Seong;Lee, Kyoung-Hwan;Lee, Sa-Won;Lee, Young-Hie
    • Journal of Electrical Engineering and Technology
    • /
    • 제6권4호
    • /
    • pp.551-555
    • /
    • 2011
  • The Crab label tag with a loop matching feed and a modified dipole antenna structure was proposed. The antenna impedance is conjugated easily to a radio frequency identification IC chip impedance by a loop matching feed. The reading range of the crab structure tag is 0.9-1.0 m from the upper side of the formula milk can lid. The fabricated label tag size is $44.0{\times}44.0mm^2$. The operating frequency at -3 dB return loss is 861.0-929.0 MHz, and the maximum reading range at the anechoic chamber is 1.5 m.