• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.1
• /
• pp.9-15
• /
• 2000

This paper presents a implementation of digital motion control system for induction motor vector drives using the 16bit DSP TMS320F240. The DSP controller enable enhanced real time algorithm and cost-effective design of intelligent controllers for motors which can be yield enhanced operation, fewer system components, lower system cost, increased efficiency and high performance. The system presented are speed and current sensing, sine look-up table and generated SVPWM by fully integrated control software. The developed system in a implementation are shown a good speed response and motion control characteristic results, and high performance features in general purposed 2.2[kW] machine. The system can be adapted variform motor drive system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.3
• /
• pp.270-276
• /
• 2018

This paper presents a low area 256-point pipelined FFT architecture, especially for IEEE 802.16a WiMAX systems. Radix-24 algorithm and single-path delay feedback (SDF) architecture are adopted in the design to reduce the complexity of twiddle factor multiplication. A new cascade canonical signed digit (CSD) complex multipliers are proposed for twiddle factor multiplication, which has lower area and less power consumption than conventional complex multipliers composed of 4 multipliers and 2 adders. Also, the proposed cascade CSD multipliers can remove look-up table for storing coefficient of twiddle factors. In hardware implementation with Cyclone 10LP FPGA, it is shown that the proposed FFT design method achieves about 62% reduction in gate count and 64% memory reduction compared with the previous schemes.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.335-336
• /
• 2011

홀로그램은 레이저 빔의 간섭을 이용하여 입체영상을 광학적으로 기록하는 방법으로 동영상의 기록 및 재생에는 여러 제약 조건이 따른다. 때문에 광학적 방법으로는 홀로그램 TV 시스템을 구현하기 힘들다. 이런 단점을 극복하기 위해 컴퓨터를 이용해 홀로그램을 구현할 수 있다. 즉, 광학적인 신호들을 근사화한 후 컴퓨터에서 수학적인 연산을 거쳐 간섭 무늬를 계산하는 Computer generated hologram(CGH) 방법을 사용하여 패턴을 생성한다. 하지만 CGH 기법의 경우 상당한 연산을 필요로 하기 때문에 연산을 최적화하여 홀로그램 생성에 걸리는 시간과 비용을 최소화하려는 연구들이 많이 진행되고 있다. 본 논문에서는 이전에 연구된 CGH 고속 연산을 위한 알고리즘을 정리하며 연산 식의 최적화를 통해 연산을 횟수를 줄이는 방법과 look-up table 을 이용한 방식의 연산량과 하드웨어 비용을 계산하여 multi-processor 에 적용 시 어떤 알고리즘이 유리할지 제안한다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.06a
• /
• pp.181-184
• /
• 2001

문법적으로 정확한 한국어 음성을 합성하려면 표준어 규정의 '표준 발음법'을 준용해야 한다. 따라서 한국어 음가 합성 시스템에 사용되는 한글을 음성으로 변환하여 주는 규칙은 '표준 발음법'을 완전하게 반영하며 또한 무결해야 한다. 기존의 연구에서는 표준 발음법을 검증없이 적용하여 왔고, 표준 발음법자체에 모순이 있는가의 여부에 대해서도 체계적인 분석을 위한 시도가 전무하였다. 본 논문에서는 한국어 음가 생성의 기본 규칙으로 준용할 표준 발음법을 페트리넷으로 모델링하여 표준 발음법의 일관성을 검증하였다. 그리고, 음운 변동 현상을 설러 단계로 나누어 차례로 적용한다든지, 변동된 단어에 대하여 처음부터 다시 변환 작업을 재수행하는 기존의 음가 생성 방법의 문제점을 해결하기 위하여 한번의 테이블 탐색으로 모든 음운 변동이 완료되는 한국어 음성 합성을 위한 음가 변란 테이블을 구현하였다.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1449-1453
• /
• 1987

A microprogrammable Bit Slice Sinal Processor for image processing is implemented. Processing speed is increased by the parallelism in horizontal microprogram using 120bits microcode, pipelined architecture, 2 bank memory switching that interfaces with the Host through DMA, a variable clock control, overflow checking H/W,look-up table method and cache memory. With this processor, a DCT algorithm which uses 2-D FFT is performed. The execution time for $512{\times}512{\times}8$ image is 12 sec when 16 bit operation is runned, and the recovered image has acceptable quality with MSE 0.276%.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.794-796
• /
• 2006

This study investigated the Brightness Temperature Difference threshold as criterion between aerosols and clouds in conjunction with radiative transfer model. Surface temperature is caused by a significant error over 50% in the BTD threshold. In addition, The BTD threshold contains the uncertainties about 20% due to the surface emissivity and 8% due to the satellite zenith angle. Therefore, we have composed the Look-up table for BTD between 11㎛and 12㎛ according to satellite zenith angle, surface temperature, and surface emissivity. The modified BTD show the enhanced signal, especially over bright surface such as desert in China. However, a weak aerosol signal over Ocean remains in the modified BTD.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.619-622
• /
• 2006

Atmospheric correction is one of critical procedures to extract quantitative information related to biophysical variables from hyperspectral data. In this study, we attempted to generate the water vapor contents image from hyperspectral data itself and developed the atmospheric correction algorithm for EO-1 Hyperion data using pre-calculated atmospheric look-up-table (LUT) for fast processing. To apply the new atmospheric correction algorithm, Hyperion data acquired June 3, 2001 over Seoul area is used. Reflectance spectrums of various targets on atmospheric corrected Hyperion reflectance images showed the general spectral pattern although there must be further development to reduce the spectral noise.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.952-955
• /
• 1996

It is difficult to determine the feeding rate of coagulant in water treatment process, due to nonlinearity, multivariables and slow response characteristics etc. To deal with this difficulty, the fusion of genetic algorithms and fuzzy inference system was used in determining of feeding rate of coagulant. The genetic algorithms are excellently robust in complex operation problems, since it uses randomized operators and searches for the best chromosome without auxiliary information from a population consists of codings of parameter set. To apply this algorithms, we made the look up table and membership function from the actual operation data of water treatment process. We determined optimum dosages of coagulant (PAC, LAS etc.) by the fuzzy operation, and compared it with the feeding rate of the actual operation data.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1292-1295
• /
• 1996

This paper proposes an adaptive control technique for the autopilot design of STT missile. Dynamics of the missile is highly nonlinear and the equilibrium point is vulnerable to change due to fast maneuvering. Therefore nonlinear control techniques are desirable for the autopilot design of the missile. The nonlinear controller requires the exact model to obtain satisfactory performance. Generally a look-up table is used for the dynamic coefficients of a missile, so there must be coefficients error during actual flight, and the performance of the nonlinear controller using these data can be degraded. The proposed adaptive control technique compensates the nonlinear controller with modeling error resulting from the error of aerodynamic data and disturbance. To investigate the usefulness, the proposed method is applied to autopilot design of STT missile through simulations.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.177-185
• /
• 1996

This paper describes several algorithms for technolgoy mapping of logic functions into interesting and popular FPGAs that use look-up table memories. In order to improved the technology mapping for FPGA, some existing multi-level logic synthesis, decomposition reduction and packing techniques are analyzed and compared. And then new algorithms such as merging fanin, unified reduction and multiple disjoint decomposition which are used for combinational logic design, are proposed. The cost function is used to minimize the number of CLBs and edges of the network. The cost is a linear combination of each weight that is given by user. Finally we compare our new algorithm with previous logic design technique. In an experimental comparison our algorithm requires 10% fewer CLB and nets than SIS-pga.