• Structural Engineering and Mechanics
• /
• 제74권6호
• /
• pp.809-819
• /
• 2020

For the first time, the influence of in-plane magnetic field on wave propagation of Graphene Nano-Platelets (GNPs) polymer composite nanoplates is investigated here. The impact of three- parameter Kerr foundation is also considered. There are two different reinforcement distribution patterns (i.e. uniformly and non-uniformly) while the material properties of the nanoplate are estimated through the Halpin-Tsai model and a rule of mixture. To consider the size-dependent behavior of the structure, Eringen Nonlocal Differential Model (ENDM) is utilized. The equations of wave motion derived based on a higher-order shear deformation refined theory through Hamilton's principle and an analytical technique depending on Taylor series utilized to find the wave frequency as well as phase velocity of the GNPs reinforced nanoplates. A parametric investigation is performed to determine the influence of essential phenomena, such as the nonlocality, GNPs conditions, Kerr foundation parameters, and wave number on the both longitudinal and flexural wave characteristics of GNPs reinforced nanoplates.

• Smart Structures and Systems
• /
• 제16권1호
• /
• pp.141-162
• /
• 2015

The magneto-rheological visco-elastomer (MRVE) is used as a smart core to control the stochastic micro-vibration of a sandwich plate with supported mass. The micro-vibration response of the sandwich plate with MRVE core and supported mass under stochastic support motion excitations is studied and compared to evaluate the vibration suppression capability. The effects of the supported mass and localized magnetic field on the stochastic micro-vibration response of the MRVE sandwich plate are taken into account. The dynamic characteristics of the MRVE core in micro-vibration are described by a non-homogeneous complex modulus dependent on vibration frequency and controllable by applied magnetic fields. The partial differential equations for the coupled transverse and longitudinal motions of the MRVE sandwich plate with supported mass are derived from the dynamic equilibrium, constitutive and geometric relations. The simplified ordinary differential equations are obtained for the transverse vibration of the MRVE sandwich plate under localized magnetic fields. A frequency-domain solution method for the stochastic micro-vibration response of sandwich plates with supported mass is developed based on the Galerkin method and random vibration theory. The expressions of frequency-response functions, response power spectral densities and root-mean-square velocity responses of the plate in terms of the one-third octave frequency band are obtained for micro-vibration evaluation. Finally, numerical results are given to illustrate the large response reduction capacity of the MRVE sandwich plate with supported mass under stochastic support motion excitations, and the influences of MRVE parameters, supported mass and localized magnetic field placement on the micro-vibration response.

• 천문학회지
• /
• 제32권2호
• /
• pp.127-136
• /
• 1999

In this study we present the study of solar active regions based on BOAO vector magnetograms and H$\alpha$ filtergrams. With the new calibration method we analyzed BOAO vector magnetograms taken from the SOFT observational system to compare with those of other observing systems. In this study it has been demonstrated that (1) our longitudinal magnetogram matches very well the corresponding Mitaka's magnetogram to the extent that the maximum correlation yields r=0.962 between our re-scaled longitudinal magnetogram and the Mitaka's magnetogram; (2) according to a comparison of our magnetograms of AR 8422 with those taken at Mitaka solar observatory their longitudinal fields are very similar to each other while transverse fields are a little different possibly due to large noise level; (3) main features seen by our longitudinal magnetograms of AR 8422 and AR 8419 and the corresponding Kitt Peak magnetograms are very similar to each other; (4) time series of our vector magnetograms and H-alpha observations of AR 8419 during its flaring (M3.1/1B) activity show that the filament eruption followed the sheared inversion line of the quadrupolar configuration of sunspots, indicating that the flare should be associated with the quadrupolar field configuration and its interaction with new filament eruption. Finally, it may be concluded that the Solar Flare Telescope at BOAO works normally and it is ready to do numerous observational and theoretical works associated with solar activities such as flares.

• 한국자기학회지
• /
• 제4권3호
• /
• pp.239-243
• /
• 1994

NiFe와 TbCo의 게면에서의 자기 교환 결합을 이용하여 자기 저항 소자에 수평 및 수직 바이어스 자장을 제공할수 있도록 $NiFe/TbCo/Si_3N_4$ 박막을 제조하였다. Tb의 면적비가 36 %이고, 기판 바이어스를 인가하지 않았을때 100~180 Oe의 교환 자장을 얻을 수 있었다. NiFe, TbCo, 그리고 보호막으로 사용되는 $Si_3N_4$ 각층의 두께는 각각 $470\;{\AA},\;2400\;{\AA},\;600\;{\AA}$ 이었다. NiFe를 1000 W의 전력과 2.5 mTorr의 아르곤 압력에 제작한 시편에서 1.45 %의 자기 저항 변화율을 얻을 수 있었다. 미세 소자로 제작된 NiFe의 자기 저항 변화율은 1.31 %로 감소 하였으며, 감자화 자장의 영향으로 박막이 완전히 포화되지 못한 곡선을 보였다. 150 Oe의 교환 자 장을 갖는 박막을 자화 용이 방향과 $36^{\circ}$의 각도로 소자를 제작한 결과 약 85 Oe 정도의 자기 저항 응답 곡선의 천이를 보였으며, 소자의 동작점이 응답의 선형 구간으로 이동하였다. 또한 Barkhausen 잡음이 교환 자장에 의한 수평 바이어스에 의하여 제거되었다.

• 한국자기학회지
• /
• 제17권5호
• /
• pp.188-193
• /
• 2007

[ $1.00{\times}0.24\;{\mu}m^2$ ] 크기의 $Ni_{80}Fe_{20}$ 박막의 자화 반전 거동을 자화 용이축으로 1 ns 이하의 펄스 자기장의 지속 시간과 세기를 변수로 인가하여 micromagnetics 시뮬레이션으로 관찰하였다. 자성 박막은 직사각형과 타원형의 모양을 가지며, 두께는 2 nm와 4 nm로 설정하였다. 실험 결과 $Ni_{80}Fe_{20}$ 박막의 두께와 모양에 따라 각각 다른 경향을 보이는 것을 확인할 수 있었다. 박막의 두께에 따라 두께 방향으로 형성되는 반자장의 크기 차에 의해 edge domain에서 스핀의 회전속도와 스핀 스위칭의 거동에 차이가 생기며, 박막이 두꺼울수록 자화 반전에 더 긴 펄스 지속 시간과 강한 펄스 자기장이 필요하다는 것을 확인하였다. 한편, 자화 반전이 예상되는 영역에서 자화 반전이 일어나지 않는 비정상적인 자화 반전 영역을 발견할 수 있었는데, 박막의 모양이 타원일 때와 박막의 두께가 얇은 경우에 그 영역이 더욱 불규칙적이고, 넓게 분포하였다. 이러한 현상은 막의 두께가 매우 얇기 때문에 두께 방향으로 형성된 강한 반자장의 영향에 의해 나타나는 것으로 여겨진다. Edge domain이 더 많은 직사각형 모양의 경우 자화반전이 일어나는 동안 자기모멘트의 세차 운동에 의해 생기는 $M_z$ 성분, 즉 두께방향으로 형성된 반자장이 더 작고, 이에 따라 자화 반전이 예상되는 영역에서 자화 반전이 일어나지 않는 비정상적인 자화 반전 영역이 더 적어짐을 확인하였다. 본 시뮬레이션 결과는 자성박막의 안정된 고속 자화반전을 위해서는 반자장의 영향을 최소화하는 것이 중요하다는 것을 보여준다.

• 천문학회지
• /
• 제36권spc1호
• /
• pp.109-115
• /
• 2003

We report the results of the ionospheric measurement obtained from the instruments on board the Korea Multi-Purpose Satellite - 1 (KOMPSAT-l). We observed a deep electron density trough in the nighttime equatorial ionosphere during the great magnetic storm on 15 July 2000. We attribute the phenomena to the up-lifted F-layer caused by the enhanced eastward electric field, while the spacecraft passed underneath the layer. We also present the results of our statistical study on the equatorial plasma bubble formation. We confirm the previous results regarding its seasonal and longitudinal dependence. In addition, we obtain new statistical results of the bubble temperature variations. The whole data set of measurement for more than a year is compared with the International Reference Ionosphere (IRI). It is seen that the features of the electron density and temperature along the magnetic equator are more prominent in the KOMPSAT-l observations than in the IRI model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.41-43
• /
• 1996

This paper describes on concerning electromagnetical and thermal behaviors during normal transition in Bi-2223/Ag superconducting multifilamentary tapes by conduction cooling. Some experiments were carried with operating temperature, 10-40K, and transport current as parameters in zero magnetic field. Sample tapes are transited normally with heater to intiate a quench. The voltage and temperature properties which accord to normal transition are measured by voltage taps and thermocouples attached to sample tapes, we also calculated longitudinal and transverse directions normal-zone propagation velocities from the voltage traces.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2007년도 춘계학술대회
• /
• pp.11-14
• /
• 2007

An additive servo-system is developed to improve straightness of linear motor stages. For linear motor stages used in the field of high-precision linear motion process, high straightness accuracy is necessary as well as positioning accuracy in the longitudinal axis. In such cases, machining and assembling cost increases to improve the straightness accuracy. An electro-magnetic actuator which is relatively cost effective than any other conventional servo-systems is suggested to compensate the fixed straightness error. To overcome the compensation error due to modeling error and friction disturbance, a sliding mode control is addressed. The effectiveness of the suggested mechanism and the control are illustrated along with some experimental results.

• 전기의세계
• /
• 제20권5호
• /
• pp.15-18
• /
• 1971

Up to now, there have been numerous investigations about the effect of diffusion on the wave propagation in gaseous plasmas, but not so much in semiconductor magnetoplasmas. However, currently, it becomes the centor of interest to work with the latter problem, and this paper deals with the dispersion equation including diffusion effect in the latter case to see how diffusion affects the equation in which diffusion term is neglected in the first place, and the analysis is based on the assumption that the plasma can be treated as a hydrodynamical fluid, since, from a macroscopic view point, the plasma interacting with a magnetic field can be considered as a magneto-hydrodynamical fluid, an electrically conducting fluid subjected to electromagnetic force, and the system is linear. The results of the relation and computation show that in the non-streaming case the diffusion terms appear in the equation as perturbation terms and the amplitude of the wave vector changes parabolically with the variation of the angular frequency and the longitudinal modes are observed.

• 한국소음진동공학회논문집
• /
• 제21권10호
• /
• pp.924-933
• /
• 2011

The possibility of noncontact excitation of vibrations in a shaft was investigated in order to enable online structural health monitoring of a shaft during its rotating condition without stop operation. The proposed noncontact exciter was devised to exclusively generate one of two shaft vibration modes, so called longitudinal and flexural. Using the prototypes and a lot of experiments on them, it was proven that bias magnetic field, exciting voltage, center frequency, and geometry of yokes have crucial impacts on its output characteristics.