• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.7
• /
• pp.67-73
• /
• 2020

Shrinkage is inevitable in the curing of resins during the nanoimprint process. The degree of shrinkage that occurs as the resin transforms from a viscous liquid to solid differs depending on the type of resin. However, if the cured material is repeatedly cured using the same material, constant shrinkage can be confirmed. In this study, the pattern of change was observed by repeatedly performing the nanoimprint process using a resin with a constant shrinkage rate. The observed pattern for the change of shape was made using a triangular pyramid-shaped aluminum master mold and a flexible replica mold made from the master. Shrinkage that results from the nanoimprint process occurs linearly in the longitudinal direction of the pattern and can be predicted by simple calculations. The change of the pattern due to shrinkage occurred as expected. If the shrinkage rate remains constant, various patterns can be manufactured with high accuracy by correcting these changes before producing a specific shape. This study confirms that the pattern of the desired angle can be obtained by performing the repeated imprint without having to manufacture a master mold.

• Steel and Composite Structures
• /
• v.26 no.6
• /
• pp.693-703
• /
• 2018

To better understand the influence of hollow ratio on the hollow concrete-filled circular steel tubular (H-CFT) stub columns under axial compression and to propose the design formula of ultimate bearing capacity for H-CFT stub columns, 3D finite element analysis and laboratory experiments were completed to obtain the load-deformation curves and the failure modes of H-CFT stub columns. The changes of the confinement effect between core concrete and steel tube with different hollow ratios were discussed based on the finite element results. The result shows that the axial stress of concrete and hoop stress of steel tube in H-CFT stub columns are decreased with the increase of hollow ratio. AfteGr the yield of steel, the reduction rate of longitudinal stress and the increase rate of circumferential stress for the steel tube slowed down. The confinement effect from steel tube on concrete also weakened slowly with the increase of hollow ratio. Based on the limit equilibrium method, a simplified formula of ultimate bearing capacity for the axially loaded H-CFT stub columns was proposed. The predicted results showed satisfactory agreement with the experimental and numerical results.

• Korean Journal of Adult Nursing
• /
• v.13 no.1
• /
• pp.70-81
• /
• 2001

The relationships among self efficacy, depression and coping with cancer were examined in 194 outpatients who had received a diagnosis of cancer. The sample for this descriptive correlational study consisted of people who were at least 19 years old and had been treated for cancer at 6 hospital in Seoul. Data were collected using a self-report questionnaire. The results of this study are as follows: 1. People who attributed cancer to heredity/family showed the highest mean score of self efficacy. People who attributed cancer to smoking showed the highest mean score of depression. and coping. 2. There were significant differences between causal attribution and depression and between causal attribution and coping. 3. There was a negative correlation between self-efficacy and depression(r=-.301, p= .000), whereas there was a positive correlation between self-efficacy and coping (r=.195, 0=.006). Finally, it is evident that identifying clear perceived causes, self-efficacy, depression and coping in patients with cancer continues to challenge researchers. Based upon this study, it is recommended that future research have a longitudinal design that allows for the identification of changes in perception, emotion and coping and, possibly, different relationships over time.

• Journal of Mechanical Science and Technology
• /
• v.20 no.11
• /
• pp.1801-1812
• /
• 2006

In this paper, a 4-wheel vehicle model including the effects of tire slip was considered, along with variable parameter sliding control, pushrod force as the end control parameter, and an antilock sliding control, in order to improve the performance of the vehicle longitudinal response. The variable sliding parameter is made to be proportional to the square root of the pressure derivative at the wheel, in order to compensate for large pressure changes in the brake cylinder. A typical tire force-relative slip curve for dry road conditions was used to generate an analytical tire force-relative slip function, and an antilock sliding control process based on the analytical tire force-relative slip function was used. A retrofitted brake system, with the pushrod force as the end control parameter, was employed, and an average decay function was used to suppress the simulation oscillations. Simulation results indicate that the velocity and spacing errors were slightly larger than the results that without considering wheel slip effect, the spacing errors of the lead and follower were insensitive to the adhesion coefficient up to the critical wheel slip value, and the limit for the antilock control on non-constant adhesion road condition was determined by the minimum of the equivalent adhesion coefficient.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.97-102
• /
• 2002

Bolt-tightened Langevin type vibrators using longitudinal mode of bar were designed and fabricated. In order to amplify the displacement of the tip of the vibrators, stacked ceramics were used and five different shapes of the horns were designed and fabricated. Resonant frequencies and vibrational characteristics of vibrators and horns were analyzed by ANSYS(finite element analysis computer program), and the displacements of tips of the horns were measured. As results, when the number of the stacked ceramics were increased, the displacements of the tips were increased and the driving voltages were decreased. Step1 horn(BLT-Stl) showed maximum displacement of 36.92[${\mu}m$] at 36.7[kHz] with 45[Vrms] and 0.11[A]. The displacement amplification ratio was about 5.2. But, the stress of step1 horn was concentrated on intersection, where two diameters meet. To lessen the stress, step3 shaped horn is recommended.

• Textile Coloration and Finishing
• /
• v.11 no.1
• /
• pp.34-41
• /
• 1999

To examine the increase of paper strength by solvent-bonding using N-methylmorpholine N-oxide (NMMO), a paper was treated with aqueous solutions of NMMO, concentrated at $90^\circ{C}$ for selected periods of time, and pressed for 5 seconds followed by washing and drying. The effect of the increasing NMMO concentration on bonding state and some important properties of samples were mainly investigated. With increasing concentration of NMMO, the degree of bonding between fibers was increased, the fiber cross-sectional shape was changed from 'thin ribbonlike' to 'round rodlike' by swelling with solvent, and the longitudinal waves (crimp) were introduced to fibers, hence the shrinkage, weight per unit area, and thickness of paper were increased. Consequently, the tensile strength and elongation, under standard and wet conditions, and the stiffness were increased, and the water absorption was decreased generally with increasing concentration of NMMO. The moisture regain of treated samples was lower than that of the untreated sample, because of the reduction of space between fibers. But the moisture regain was increased a little with increasing concentration of NMMO due to the fiber swelling with NMMO followed by structural relaxation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5109-5115
• /
• 2014

The aim of this study was to develop a standard toothbrush to determine the changes the dental arch form. Toothbrushes were collected from university students Items, such as the toothbrush head size, shape of head, numbers of tuft, neck size, neck angle, and handle size, were measured. the full mouth study models from the participants were In conclusion, the size of the head of the toothbrush for adults needs to be less than the 25mm and less than 11mm in the longitudinal and transverse directions, respectively. The choice of toothbrush is important for controlling oral hygiene and professional education on the selection of the appropriate toothbrush is needed.

• Journal of the Korean Society for Library and Information Science
• /
• v.39 no.2
• /
• pp.147-160
• /
• 2005

This study examines trends of web query types and topics submitted to NAVER during one year period by analyzing query logs and click logs. There was a seasonal difference in the distribution of query types. Query type distribution was also different between weekdays and weekends, and between different days of the week. The log data show seasonal changes in terms of the topics of queries. Search topics seem to change between weekdays and weekends, and between different days of the week. However, there was little change in overall patterns of search behavior across one year. The implications for system designers and web content providers are discussed.

• Journal of Families and Better Life
• /
• v.33 no.4
• /
• pp.105-118
• /
• 2015

This study examined whether structural (coresidence, proximity) and associational (frequency of face-to-face contact, frequency of contact via phone, email or letter) solidarity between adult children and older parents may influence older parents' cognitive functioning. Adult children may help delay older parents' cognitive decline by promoting healthier lifestyle, engaging parents in complex everyday problem solving, and providing emotional support. The data consisted of men and women 65+ at Wave 1 who had at least one child 20+ and participated in at least two waves of the Korean Longitudinal Study of Ageing (KLoSA, N=3,961). Cognitive functioning was measured with the Korean version of the Mini Mental State Examination. Fixed effects models were estimated using the xtreg procedure in STATA. Findings suggest that increases in proximity with at least one adult child may lead to enhanced cognitive functioning among older parents. Neither transitioning to coresidence with at least one adult child nor increases in frequency of contact with at least one non-resident adult child was associated with changes in older parents' cognitive functioning. With older parents' increasing preference for living close by, but not necessarily living with adult children, greater proximity may provide more opportunities for reciprocal support exchanges between the two generations, leading to better cognitive functioning of older parents.

• Korean Journal of Social Welfare
• /
• v.62 no.1
• /
• pp.109-132
• /
• 2010

This study examined the effects of depression by household's economic factors with income levels using the wave 1, 2 of Korean Welfare Panel Study. As a result, changes in income satisfaction have significant effects on depression levels. In non-poor households, the income and comsumption expenditure have effects on depression levels. But poor households do not have any effects. Among the control variables, age, marital status, and education level are influential factors on the depression levels. Based on the results, the author was able to recognize the economic factors in household that influnce the depression levels. and The policy directios for household's economic support were discussed.