• The Journal of Advanced Prosthodontics
• /
• v.5 no.1
• /
• pp.21-28
• /
• 2013

PURPOSE. This study examined the effects of the abutment types and dynamic loading on the stability of implant prostheses with three types of implant abutments prepared using different fabrication methods by measuring removal torque both before and after dynamic loading. MATERIALS AND METHODS. Three groups of abutments were produced using different types of fabrication methods; stock abutment, gold cast abutment, and CAD/CAM custom abutment. A customized jig was fabricated to apply the load at $30^{\circ}$ to the long axis. The implant fixtures were fixed to the jig, and connected to the abutments with a 30 Ncm tightening torque. A sine curved dynamic load was applied for $10^5$ cycles between 25 and 250 N at 14 Hz. Removal torque before loading and after loading were evaluated. The SPSS was used for statistical analysis of the results. A Kruskal-Wallis test was performed to compare screw loosening between the abutment systems. A Wilcoxon signed-rank test was performed to compare screw loosening between before and after loading in each group (${\alpha}$=0.05). RESULTS. Removal torque value before loading and after loading was the highest in stock abutment, which was then followed by gold cast abutment and CAD/CAM custom abutment, but there were no significant differences. CONCLUSION. The abutment types did not have a significant influence on short term screw loosening. On the other hand, after $10^5$ cycles dynamic loading, CAD/CAM custom abutment affected the initial screw loosening, but stock abutment and gold cast abutment did not.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1710-1715
• /
• 2010

Service life of water pipes buried in the underground is considerably affected from various factors such as environmental characteristics, pipe characteristics, operation and maintenance, etc. Therefore it is difficult to determine their service life as uniformly the same value assigned by related laws and ordinances. As a result, the service life should be determined by the technical judgement based on the assessment for the condition of water pipes. In this study, It was established that the methodology could predict present and future failure risk, and plan short and long-term strategies for replacement/rehabilitation through the assessment for the physical deterioration and economical values of buried water pipe. The methodology was applied for the verification and reliability to several sites selected in multi-regional transmission pipelines. The proposed method could helps to support reasonable and economical decision of rehabilitation/replacement in the present and future. To improve conventional assessment method of aged water pipes, affecting factors are simplified based on the statistical analysis results from the measured data in the field and the physical deterioration mechanism for better reliability. Also, the guide-line is developed to carry out the reasonal rehabilitation planning through water pipe condition assessment.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.316-322
• /
• 2019

A probabilistic approach considering uncertainties was employed to investigate the effects on the material characteristics and strength of nuclear bio-logical shield concrete walls, when exposed to long-term radiation during the entire service life. Time-dependent compressive and tensile strengths were estimated by conducting the neutron fluence analysis. For the contaminated concrete, individual compressive and tensile failure probabilities can be possibly evaluated by not only establishing limit-state function withthe predefined critical values but also performing Monte Carlo Simulation. Nuclear power plant types similar to the Kori Unit 1, which was shut off permanently in 2017 after the 40-year operation, were herein selected for an illustrative purpose. Consequently, the probability-based performance assessment and prediction of contaminated concrete walls were well demonstrated.

• Journal of Chest Surgery
• /
• v.44 no.1
• /
• pp.25-31
• /
• 2011

Background: Mature autogenous arteriovenous fistulas have better long term patency and require fewer secondary interventions compared to arteriovenous prosthetic graft. Our Study evaluated vascular patency rates and incidence of interventions in autogenous arteriovenous fistulas and grafts. Material and Methods: A total of 166 vascular access operations were performed in 153 patients between December 2002 and November 2009. Thirty seven caeses were excluded due to primary access failure and loss of follow-up. One group of 92 autogenous arterioveous fistulas and the other group of 37 arteriovenous prosthetic grafts were evaluated retrospectively. Primary and secondary patency rates were estimated using the Kaplan-Meier method. Results: The primary patency rate (84%, 67%, 51% vs. 51%, 22%, 9% at 1, 3, 5 year; p=0.0000) and secondary patency rate (96%, 88%, 68% vs. 88%, 65%, 16% at 1, 3, 5 year; p=0.0009) were better in autogenous fistula group than prosthetic graft group. Interventions to maintain secondary patency were required in 23% of the autogenous fistula group (average 0.06 procedures/patient/year) and 65% of prosthetic graft group (average 0.21 procedures/patient/year). So the autogenous fistula group had fewer intervention rate than prosthetic graft group (p=0.01) The risk factor of primary patency was diabetus combined with ischemic heart disease and the secondary patency's risk factor was age. Conclusion: Autogenous arteriovenous fistulas showed better performance compared to prosthetic grafts in terms of primary & secondary patency and incidence of interventions.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.2
• /
• pp.143-149
• /
• 2022

PCS needs to freely switch AC and DC to connect the battery, external AC loads and renewable energy in both directions for energy efficiency. Whenever converting happens, power loss inevitably occurs. Minimization of the power loss to save electricity and convert it for usage is a very critical function in PCS. PCS plays an important role in the ESS(Energy Storage System) but the importance of stabilizing semiconductors on PCB(Printed Circuit Board) should be empathized with a risk of failure such as a fire explosion. In this study, the temperature variation inside PCS was reviewed by cooling fan on top of PCS, and the vibration characteristics of PCS were analyzed during truck transportation for reliability of the product. In most cases, a cooling fan is mounted to control the inner temperature at the upper part of the PCS and components generating the heat placed on the internal aluminum cooling plate to apply the primary cooling and the secondary cooling system with inlet fans for the external air. Results of CFD showed slightly lack of circulating capacity but simulated temperatures were durable for components. The resonance points of PCS were various due to the complexity of components. Although they were less than 40 Hz which mostly occurs breakage, it was analyzed that the vibration displacement in the resonance frequency band was very insufficient. As a result of random-vibration simulation, the lower part was analyzed as the stress-concentrated point but no breakage was shown. The steel sheet could be stable for now, but for long-term domestic transportation, structural coupling may occur due to accumulation of fatigue strength. After the test completed, output voltage of the product had lost so that extra packaging such as bubble wrap should be considered.

• Journal of Periodontal and Implant Science
• /
• v.53 no.2
• /
• pp.99-109
• /
• 2023

Purpose: The aim of this systematic review was to evaluate the effectiveness of the socket shield technique (SST), an innovative surgical method introduced in 2010, for reducing buccal bone plate resorption. Methods: The review was conducted following the PRISMA guidelines. Clinical studies conducted in humans and investigating the SST were searched on PubMed (MEDLINE), Embase, Web of Knowledge, and Google Scholar in November and December 2021. The implant survival rate, percentage of complications, and clinical parameters (marginal bone loss [MBL], pink esthetic score [PES], and buccal bone plate resorption [BBPR]) were analyzed using the collected data. Results: The initial search resulted in 132 articles. After article screening, the full texts of 19 studies were read and 17 articles were finally included in the review. In total, 656 implants were installed with the SST. Nine of the 656 implants experienced failure, resulting in an implant survival rate of 98.6%. The percentage of complications was about 3.81%. The analysis of clinical parameters (MBL, PES, and BBPR), showed favorable results for the SST. The mean MBL in implants placed with the SST was 0.39±0.28 mm versus 1.00±0.55 mm in those placed without the SST. PES had a better outcome in the SST group, with an average of 12.08±1.18 versus 10.77±0.74. BBPR had more favorable results in implants placed with the SST (0.32±0.10 mm) than in implants placed with the standard technique (1.05±0.18 mm). Conclusions: The SST could be considered beneficial for preserving the buccal bone plate. However, since only 7 of the included studies were long-term randomized controlled trials comparing the SST with the standard implant placement technique, the conclusions drawn from this systematic review should be interpreted with caution.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3A
• /
• pp.407-415
• /
• 2008

Hydration reaction of Free-CaO is thought to be the main reason of expansion failure of slag. A lot of research institutions are conducting studies on solutions to this problem, and moreover it has been carried out how to make use of aggregates for concrete. While studies covering wide rage of blast furnace slag have been accomplished in the country, studies on steelmaking slag are insufficient. Therefore, this study aimed at analyzing basic physical properties of electric arc furnace oxidizing slag, which is the main material, and furthermore it focused on how to make use of aggregates for concrete examining chemical mechanism, which can be put to practical use. To address this issue, components of electric arc furnace oxidizing slag were analyzed with measurement of physical properties, followed by long-term strength and detailed durability analysis, which can evaluate the appropriateness of application of cement concrete. Besides the environmental conservation and recycling which can be obtained by application of industry byproducts, commercializing of electric arc furnace oxidizing slag as fine aggregates for cement concrete are expected.

• Korean Circulation Journal
• /
• v.54 no.3
• /
• pp.113-123
• /
• 2024

Background and Objectives: Previous studies have reported an association between impaired renal function and poor outcomes after radiofrequency catheter ablation in patients with atrial fibrillation (AF). However, outcomes of cryoballoon ablation (CBA) in patients with renal insufficiency are not fully elucidated. This study aimed to compare outcomes of CBA in AF patients with chronic kidney disease (CKD) versus those without CKD and to assess changes in renal function over 12 months following CBA. Methods: A total of 839 patients (65.1% with non-paroxysmal AF [PAF]) who underwent de novo CBA were prospectively enrolled. We divided patients into two groups based on creatinine clearance rate (CCr) and performed intracardiac echocardiography (ICE)-guided contrast agent-free CBA. Results: In comparison with patients without CKD (CCr >50, n=722), those with CKD (CCr ≤50, n=117) were older and predominantly female, had a lower body mass index, and showed a higher prevalence of heart failure and hypertension. Mean CHA₂DS₂-VAS score was significantly higher in CKD group than in non-CKD group. Procedure-related complications were not significantly different between two groups. During a mean follow-up period of 25.4±11.9 months, clinical recurrence occurred in 182 patients (21.7%) and not significantly different between two groups. In multivariate analysis, non-PAF and left atrial size were independent predictors of AF recurrence. CCr levels significantly improved over 12 months after CBA in CKD group. Conclusions: ICE-guided contrast-agent-free CBA showed comparable long-term clinical outcomes without increasing procedure-related complications and improvement of renal function over 12 months following CBA in AF patients with CKD.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.3
• /
• pp.35-45
• /
• 2010

The mechanism of load transfer by punching shear in pile-supported embankments is investigated. Based on the geometric configuration of the punching shear observed in sand fills on soft ground, a theoretical analysis is carried out to predict the embankment loads transferred on a cap beam according to punching shear developed in pile-supported embankments. The equation presented by the theoretical analysis was able to consider the effect of various factors affecting the vertical loads transferred on the cap beam. The reliability of the presented theoretical equation is investigated by comparing it with the results of a series of model tests. The model tests were performed on cap beams, which had two types of width; one is narrow width and the other is wide width. Sand filling was performed through seven steps. Two types of loading pattern were applied at each filling step; one is the long-term loading, in which sand fills at each filling step were kept for 24 hours, the other is the short-term loading, in which sand fills at each filling step were kept for 2 hours. The vertical loads measured in all model tests show good agreement with the ones predicted by the theoretical equation. Finally, the predicted vertical loads also show good agreement with the vertical loads measured in a well-instrumented pile-supported embankment in field, where cap beams were placed on too wide space.

• Radiation Oncology Journal
• /
• v.14 no.4
• /
• pp.291-297
• /
• 1996

Purpose : This study was performed to evaluate survival, failure patterns, and prognostic factors of MMR patients after radiation therapy. We also discussed the need for chemotherapy. Materials and Methods : A retrospective analysis was done for 23 patients with MMR who were treated with radiation therapy from June 1985 to November 1992. There were 19 male and 4 female patients, The patients' age ranged from 17 to 71 years (median 39 years). Systemic symptoms including fever, weight loss, or malaise were found in $30\%$ of the patients. The nasal cavity was most frequently involved No patients had nodal involvement at diagnosis. There were 2 patients with distant metastasis at presentation. Radiation therapy was delivered five times a week, 1.8 Gy daily, total $45\~54$ Gy (median 50.4 Gy) using 6 MV X-ray No patients received chemotherapy as initial treatment. Results : Overall 5-year and 10-year survival rates were $52.4\%$ and $44.1\%$, respectively. Seventy Percent(12/17) of the patients achieved complete response to radiotherapy, and $29.4\%$ (5/17) achieved partial response. The Patients with complete response showed a better 5-year survival rate than those with partial response ($66.9\%$ vs. $20\%$. p=0.004). Symptom duration before diagnosis, the presence of systemic symptom, and the number of primary sites had no influence on survival. The patterns of failure were as follows: local failure(1), failure in adjacent site(1), local and distant failure(1) distant metastasis(2). and conversion to malignant lymphoma(1). We could not find factors associated with the patterns of failure. Conclusion : The most important facto associated with survival was the response to radiotherapy. Seventeen percent of the patients had distant metastasis, and the salvage after distant metastasis was not successful. However. about $50\%$ of the patients could achieve long-term survival with local radiation therapy alone. Therefore, chemotherapy of MMR should be done after a prospective randomized study for the factors associated with distant metastasis.